Sheet numerator

Sheet numerator

The function allows to renumber sheets in the project

To the store Forum Video #1 Video #2


  • Revit ribbon


32x32px 16x16px


Renumbering of sheets is carried out within one group of sheets. You can display all sheets by analogy with the current settings of the project manager or display all sheets in one group. There is an opportunity to change the position of sheets by moving them in the group, while maintaining the initial numbering of sheets in this group



In the upper left part of the window there is a drop-down list with the option of displaying sheets.:

Display by groups – with this option, the list will be filled in by analogy with the project browser. Sheets will be placed in groups according to the browser organization settings

Display all – With this option, all sheets will be displayed in one group

7 - reload sheet list. The button becomes active if the sheets in the list have been moved, but the numbering has not been applied

Below is a field that displays the sheets in groups. Sheets in the list can be dragged with the mouse. You can drag sheets only within one group. When you select a list or group in the list, a preliminary renumbering will be automatically performed - the sheets will change the number according to the current renumbering settings. At the same time, a warning icon may appear to the left of the sheet:

5 - indicates that the number of this sheet, with the current renumbering settings, coincides with the number of another sheet. No renumbering possible

If unchecked Enable move renumbering and at the same time move at least one sheet in the list, then a warning icon will appear at the bottom of the list:

6 - this icon indicates that the position of the sheets in the list does not match the position of the sheets in the project browser. If this icon is displayed, it is not possible to enable the renumbering option by moving. The icon will disappear as soon as the renumbering with the current position of the sheets is applied

Enable move renumbering – when this option is enabled, the possibility of renumbering sheets in the group by specified settings is disabled. If you move the sheet in the list of sheets, all the sheets in the group will be renumbered: the position of the sheets relative to each other will change, but the continuous numbering in the group will remain the same

It was Moved It became
  • 01 – Initial view
  • 02 – Total information
  • 03 – Title
Sheet Title moved to position between sheets Initial view and Total information
  • 01 – Initial view
  • 02 – Title
  • 03 – Total information

In the right part there are fields with re-numbering settings for the current group

Simple numbering settings for a group


Prefix, Suffix – fields for specifying the prefix and suffix in the new sheet numbers, respectively

Numeric field – field to set the initial numbering number

Extended numbering settings for group


Part 1,2,3 - customizable part of the sheet number. New sheet numbers will be composed of parts and separators between parts.

For each part, you can specify a prefix, suffix and number. The number can be made static or dynamic (increasing or decreasing). In the case of setting a dynamic descending number, you should also set the upper limit - the number from which the numbering will start when it reaches zero. Settings for a number are displayed when focus is received by the number input field.

Write the value of X in the parameter Y – when checking one of 7 possible values of X (all number, part value or part number value) will be written to the selected parameter of the sheet Y

General numbering settings


Start numbering from selected sheet in the group – if the option is enabled, the preliminary renumbering will not be performed on all sheets in the group, but only starting from the selected sheet. The settings are applied to the group both when the entire group is selected in the list, and when a sheet is included in the list that is included in the group

3 - allows you to disable display of the preliminary renumbering for the current group
4 - allows you to enable display of the preliminary renumbering for the current group

Apply – allows you to commit changes to the numbering of sheets in the current project according to the settings for the numbering for the group