Change story

0.00 USD

Your Cart

Change history for

Year

General version:

XXX.XXX.XXX.

2026 Year

Auto Updates Module 53.2.0.0 (16.10.2026)

New

Extended the self-update logging to determine the reasons for an incomplete module update installation.

Revit: Parametrization 5.1.9.0 (16.10.2026)

Fix

Fixed the crash of Revit 2025+ when exporting results to Excel.

Fix

Fixed an error in searching for relationships for parts from an unloaded or nested link.

Fix

Added case-insensitive recognition of the "And/Or" connector when importing from Excel.

Fix

Added import of the data source file path from Excel even if the file does not exist.

Fix

Moved the formula check during import from Excel to the stage after reading the fields.

Fix

Removed the message about committing changes in the check mode.

Revit: Tools 3.3.2.0 (16.10.2026)

New

Added the "Properties copy" command for copying element properties without changing their type.

Improved

The "Properties copy" command was renamed to "Copy of type and properties".

Fix

Fixed an error where empty numeric parameters of the source element replaced the target element values with zeros when copying properties.

nanoCAD: Sum of lengths 1.3.6.0 (15.10.2026)

New

Added the choice of the decimal separator.

New

Added copying of the total value to the clipboard by clicking the result field.

New

Added the ability to collapse the window content.

Improved

Added the ability to use both a dot and a comma to separate the fractional part in coefficients.

Improved

Prohibited manual editing of the field with the total value.

Fix

Fixed an error where fractional coefficients were not saved when the window was opened again.

Fix

Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings.

Fix

Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings.

nanoCAD: Sum of areas 1.3.6.0 (15.10.2026)

New

Added the choice of the decimal separator.

New

Added copying of the total value to the clipboard by clicking the result field.

New

Added the ability to collapse the window content.

Improved

Added the ability to use both a dot and a comma to separate the fractional part in coefficients.

Improved

Prohibited manual editing of the field with the total value.

Fix

Fixed an error where fractional coefficients were not saved when the window was opened again.

Fix

Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings.

Fix

Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings.

AutoCAD: Sum of lengths 2.11.11.0 (15.10.2026)

New

Added the choice of the decimal separator.

New

Added copying of the total value to the clipboard by clicking the result field.

New

Added the ability to collapse the window content.

Improved

Added the ability to use both a dot and a comma to separate the fractional part in coefficients.

Improved

Prohibited manual editing of the field with the total value.

Fix

Fixed an error where fractional coefficients were not saved when the window was opened again.

Fix

Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings.

New

Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings.

AutoCAD: Sum of areas 1.4.10.0 (15.10.2026)

New

Added the choice of the decimal separator.

New

Added copying of the total value to the clipboard by clicking the result field.

New

Added the ability to collapse the window content.

Improved

Added the ability to use both a dot and a comma to separate the fractional part in coefficients.

Improved

Prohibited manual editing of the field with the total value.

Fix

Fixed an error where fractional coefficients were not saved when the window was opened again.

Fix

Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings.

Fix

Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings.

Revit: Apartment Typology 4.4.1.0 (15.10.2026)

New

Added consideration of phases when collecting apartments.

New

Added the "Considering the filter" option to the "Numbering" tab.

Revit: Favorite views 1.10.6.0 (15.10.2026)

New

Added the ability not to close the plugin window after running commands.

New

Added the ability to specify the configuration name when creating it.

Improved

Reworked the interface of the existing window.

Improved

Changed the logic of building the view tree to match the structure of the Revit Project Browser.

Fix

Fixed an error in view search where dependent views were not found.

Auto Updates Module 53.1.0.0 (15.10.2026)

Improved

Service update (internal changes).

Revit: Commands 1.22.1.0 (14.10.2026)

Fix

Fixed a critical Revit error when selecting elements in the family editor.

Revit: Parametrization 5.1.3.0 (14.10.2026)

New

Accelerated the search for relationships in the InRoom, InSpace, InMass, InSolid and SolidTouch strategies: it is now performed only for elements of the categories specified in the filters.

Revit: Parametrization 5.0.3.0 (12.10.2026)

Improved

Added the "Copy identifier" and "Copy name" items to the context menu of the configuration list, the strategy list and the rule name row.

Improved

Added the ability to specify strategy rules and set views by a mask (*, ?) in the automatic run.

Fix

Fixed an error where re-importing a strategy gave the strategies the same identifier.

Auto Updates Module 53.0.0.0 (12.10.2026)

New

Added downloading of updates from the server if the storage is unavailable.

Revit: View range 1.1.3.0 (09.10.2026)

Improved

Added the ability to move sliders with the mouse wheel.

AutoCAD: Dimensions by line 1.2.6.0 (09.10.2026)

New

Added buttons for expanding and collapsing the filter settings.

New

Added a palette for quickly running the strategies and rules of the current configuration.

New

Added the ability to collapse and expand functions in the Formula Editor.

New

Added highlighting of function contents in the Formula Editor.

New

Added the ability to write comments in formulas.

New

Added the ability to use Project Information parameters and global parameters in formulas.

New

Added tooltips for functions in the Formula Editor.

New

Added the SKIP_ELEMENT keyword to formulas, which allows excluding an element from processing.

New

Added new functions: CVOr, HasValue, DocTitle, TargetBottomZ, TargetTopZ, SourceBottomZ, SourceTopZ, CCMin, CCMax, CRMin, CRMax, FindItem, Item, ItemIndex, Trim, RgxMatch, RgxReplace, GetCurrentViewParameter.

New

Added new strategies: InAssembly, ViewSpecific, StairComponents, RoomOpenings, ManyToMany, RoomFinishing, OnLevel, RebarCouplers, LevelViews.

New

Added saving of the "Selected" state for strategies and rules to a separate file.

New

Added strategy pre-filters.

New

Added the ability to assign names to rules.

New

Added the ability to use conditional expression operators in formulas, which are processed in the "Check" mode.

New

Added grouping of configurations.

New

Added the ability to group target elements.

New

Added aggregate functions (with the G prefix).

New

Added new write-back functions Min, Max, Avg, First, Last.

New

Added new operators =| (contained in) and !=| (not contained in), as well as the related functions List, CCList, CRList.

New

Added the ability to ask the user to perform synchronization.

Improved

Reworked the design of the cell with formula options.

Improved

Redesigned the window with the guide.

Improved

Added expanding of results when the number of nested objects is less than 4.

Improved

Reworked the RoomBoundaries strategy: it now processes not only vertical room boundaries but also horizontal ones.

Improved

Added an error when, while getting an element parameter, it turns out that the element has several parameters with the specified name.

Improved

Removed comma highlighting in the step-by-step calculation.

Improved

Added display of the number of rules with processed expressions in the results window for strategies.

Improved

Changed the function naming style from UPPERCASE to CamelCase.

Improved

Added processing of the "Circuit Number" parameter.

Fix

Fixed an error where text selection did not work in field editors.

Fix

Fixed an error where function mapping did not work if there was no space before the function.

Fix

Fixed an error where materials were processed twice by the Materials strategy when running processing in the document.

Fix

Fixed an error where the CVIF function worked incorrectly if the column names were specified in lowercase.

Fix

Fixed an error where the values for a reference parameter were searched only among the project instances.

Revit: Visibility 1.1.6.0 (06.10.2026)

Fix

Fixed an error where the "Hide in view" and "Show in view" buttons were not displayed for all elements.

Revit: Import from Excel 2.5.9.0 (05.10.2026)

Fix

Fixed an error that occurred in some cases when importing into a schedule.

nanoCAD: Working libraries for nanoCAD 2.4.3.0 (05.10.2026)

New

Added a new mini-plugin "Select Previous".

New

Added a new mini-plugin "Select Objects in Viewport".

New

Added a new mini-plugin "Select Objects from Field".

Improved

Added the ability to select several viewports at once to transfer their boundaries to the model in the "VP boundary in model" mini-plugin.

Fix

Fixed an error that occurred when calling the "VP boundary in model" mini-plugin directly via the command.

New

Reworked the interface of the "Grids mode" command and added the "Edit" option for selecting the end to switch: start, end or both.

New

Reworked the interface of the "Show information" command.

Improved

Added a notification about the absence of an element in the view for the "Zoom selected" command.

Revit: Cropping view 2.0.8.0 (30.09.2026)

Improved

Added resetting of the "Scope Box" parameter value for non-3D views.

Revit: Working libraries for Revit 39.1.2.0 (29.09.2026)

New

Added a plugin search.

Fix

Fixed Revit freezing when selecting elements with complex families if "Built-in commands" is enabled.

Revit: Numbering 6.5.4.0 (29.09.2026)

Improved

Improved the accuracy of finding intersections with the curve.

Improved

Accelerated the processing of views with a large number of elements.

Fix

Fixed an error where numbering by curve did not find elements whose representation in the view is drawn with 2D graphics.

Fix

Fixed an error where numbering by curve was not performed in the order of the elements along the curve.

AutoCAD: Select similar 1.13.4.0 (29.09.2026)

New

Reworked the settings saving system: configurations are now used.

New

Added the ability to remove the plugin from the context menu.

New

Added the ability to set a different rounding for areas with a factor.

Fix

Fixed errors where data in the Apartment Editor was updated incorrectly.

AutoCAD: Working libraries for AutoCAD 16.3.3.0 (24.09.2026)

New

Added a new mini-plugin "Select Previous".

New

Added a new mini-plugin "Select Objects in Viewport".

New

Added a new mini-plugin "Select Objects from Field".

Improved

Fix

Fixed an error that occurred in some cases when duplicating a configuration.

The interface was migrated to the current version of the ModPlus styling library.

Improved

Display of the filter was added to the tooltip regardless of whether a name is present.

The arrangement of the buttons on the ribbon was changed to make it more compact.

Improved

Added the "Text style" property for the "Fragment mark" object.

Revit: Import from Excel 2.5.7.0 (16.09.2026)

New

Improved the accuracy of importing tables into a view: the column widths now match the sizes displayed in Excel in "Page Layout" mode.

New

Added consideration of the sheet print scale ("Adjust to … % normal size"): the table in Revit gets the same size as in "Page Layout" mode.

New

The text indent from the cell borders now matches Excel.

Improved

The interface was migrated to the current version of the ModPlus styling library.

Fix

Fixed an error in which the width of hidden columns was taken into account when importing merged cells.

Revit: Material Manager 2.0.0.0 (16.09.2026)

New

Added material presets — sets of properties saved to a file and available in any project.

New

Added creation of a new material.

New

Added display and editing of the name, description and keywords of the material appearance.

Improved

In the "Show the materials of the selected elements" mode, the material is replaced only in the selected elements when possible.

Improved

Added the ability to replace several selected materials with one new material in a single operation.

Improved

Added filtering by material class in the "Materials" table.

Improved

The interface was migrated to the current version of the ModPlus styling library.

Fix

Fixed an error in which materials assigned to piping and duct system types were not taken into account when counting material usage.

Revit: Working libraries for Revit 38.5.6.0 (15.09.2026)

Fix

Element filter: fixed an error in which the "Absence of parameter" condition was saved incorrectly in group conditions.

AutoCAD: Dimensions by line 1.1.4.0 (15.09.2026)

Improved

The type of created dimensions was changed from "aligned" to "linear".

Fix

Fixed the algorithm of the dimension grouping.

Fix

Fixed an error that could cause some settings not to be saved.

Revit: Align Views 2.0.1.0 (15.09.2026)

Improved

Improved the algorithm for selecting suitable views in the view alignment command.

Revit: Working libraries for Revit 38.5.5.0 (15.09.2026)

Improved

Service update (internal changes).

Revit: Numbering 6.5.0.0 (15.09.2026)

New

Added consideration of the invisible geometry of an element when no visible geometry is present during numbering along a curve.

The interface was migrated to the current version of the ModPlus styling library.

Revit: Tools 3.0.0.0 (10.09.2026) Read more

New

Added the new "Show information" command.

New

Added the new "Disable temporary views" command.

New

Processing of grids in the selected views was added to the "Grids mode" command.

New

Added the new "Wall Join" command.

Improved

The logic of the "Grid bubbles visibility" command was changed.

Improved

Fixed the logic of the "Zoom selected" command.

AutoCAD: Merge Revit sheets 1.12.7.0 (10.09.2026)

Improved

The interface was migrated to the current version of the ModPlus styling library.

AutoCAD: Product insert 2.6.12.0 (10.09.2026)

Improved

The interface was migrated to the current version of the ModPlus styling library.

Revit: Numbering 6.4.11.0 (10.09.2026)

Improved

The search for an intersection with a curve was changed: only the element geometry visible in the view is now taken into account.

Improved

The interface was migrated to the current version of the ModPlus styling library.

Revit: View template manager 1.0.0.0 (09.09.2026) Read more

Release

Release.

AutoCAD: Products to table 1.2.12.0 (09.09.2026)

Release

Release.

Revit: Context filter 3.0.0.0 (07.09.2026)

New

Added the ability to resize the "Same parameters" area.

New

Added the "Check all categories" and "Uncheck all categories" buttons.

New

Added the ability to reinsert the last entered value in the search box.

Improved

The logic of the "And"/"Or" filters was changed. A tooltip describing this logic was added.

Fix

Fixed an error that could occur when closing Revit with the plugin open.

Fix

Fixed an error in which the wrong shared parameter could be selected when loading a preset.

Fix

Fixed an error in which the category list of the current view was not updated when switching views.

nanoCAD: Working libraries for nanoCAD 1.1.1.0 (07.09.2026)

Fix

Fixed internal errors.

AutoCAD: Working libraries for AutoCAD 15.4.7.0 (07.09.2026)

Fix

Fixed internal errors.

AutoCAD: Slope Hatching 1.0.0.0 (04.09.2026) Read more

Release

Release.

Revit: Spot dimensions 1.6.9.0 (04.09.2026)

Improved

The interface was migrated to the current version of the ModPlus styling library.

Added launching of the main ModPlus palette if the properties palette is docked to it.

Fix

The interface was migrated to the current version of the ModPlus styling library.

Renga: Search and replace 1.0.1.0 (02.09.2026)

Improved

The interface was migrated to the current version of the ModPlus styling library.

Revit: Search and replace 2.17.5.0 (02.09.2026)

Improved

The interface was migrated to the current version of the ModPlus styling library.

Revit: Sheet copy 4.10.8.0 (02.09.2026)

Fixed an error in which the plugin did not start in some projects.

Revit: View sync 1.5.11.0 (25.08.2026)

Fix

Fixed an error in which the compatibility of some views was determined incorrectly.

Revit: Context filter 2.7.4.0 (25.08.2026)

New

In window mode, the ability to collapse the window contents was added.

New

Local logging was added.

New

Added tracking of the time between key presses when opening the filter with a keyboard shortcut.

Fix

Fixed several errors that could cause projects to load slowly.

Revit: Working libraries for Revit 38.2.2.0 (25.08.2026)

Fix

Fixed internal errors.

Revit: View sync 1.5.10.0 (21.08.2026)

Improved

Improved the algorithm for selecting views for synchronization.

Revit: Copy elements 3.4.4.0 (21.08.2026)

Improved

Improved the performance of copying view templates.

Fix

Fixed an error when copying filters with invalid fill patterns.

Auto Updates Module 51.0.4.0 (21.08.2026)

Fix

New

Added the ability to hide the "Search" section.

New

A settings window was added in palette mode.

New

Added display of keyboard shortcuts.

New

Added the ability to drag commands in the "Favorites" section.

New

Added a command weighting system: more frequently used commands appear higher in the search results.

New

Added autocomplete when searching for commands.

New

Improved

Added the ability to disable the ModPlus icon on the ribbon tab.

Revit: Coloring elements 3.8.1.0 (13.08.2026)

Fix

Fixed an error that occurred when closing the view selection window if no view was selected.

Revit: Tagless elements 1.7.9.0 (12.08.2026)

New

Added configurations.

Added the "Check open views" button in the view selection window.

New

Added search for parameter values on the current view in the window for setting up element filters by parameters.

New

Added support for special parameters in the parameter value search in the window for setting up the element filter by parameters.

New

Added the "Saturated colors" option to the save and synchronize notification services. Improved color combinations.

New

Added presets in the window for setting up the element filter by parameters.

New

Added a new built-in command "Select annotations" that allows selecting annotations related to the selected model elements on the current view.

New

Added the ability to add elements to the current selection while holding the Ctrl key for built-in commands that change the element selection.

New

Added the ability to show the document title when multi-row tab display is enabled with the "Each document on a new row" option.

Revit: Fill patterns 1.8.0.0 (10.08.2026)

New

Added a command for aligning title blocks.

Improved

Added the ability to select views via the browser in the title alignment command.

Improved

Added display of sheet dimensions in the view alignment command.

nanoCAD: Dwg base 1.0.2.0 (07.08.2026)

Fix

Removed an incorrectly displayed empty block preview image.

Revit: Room finishing 3.1.13.0 (07.08.2026)

Fix

Fixed incorrect height assignment to finishing walls in some cases.

Fix

Fixed incorrect wall finishing creation when wall segments are present in the upper part of the room.

Revit: Sheet copy 4.10.4.0 (06.08.2026)

Fix

Fixed an error where sheets were not copied when the "Copy sheet parameters" option was enabled.

Revit: Search and replace 2.16.4.0 (05.08.2026)

New

Fix

Fixed an error where the path replacement tool did not change the server address.

Revit: Copy sheets to documents 1.13.3.0 (29.07.2026)

Fix

Fixed an error where the title block was duplicated when the "Copy typical annotations" option was enabled.

Auto Updates Module 50.3.3.0 (28.07.2026)

New

Redesigned the "Components" window.

Fix

Fixed a bug where the general version was calculated incorrectly.

Revit: Elements join 1.16.11.0 (27.07.2026)

Improved

Added the "Ceilings" category to the cut categories list.

Revit: Filter selection 1.5.1.0 (25.07.2026)

Fix

Fixed an error where the plugin window could be opened multiple times.

Revit: External dimensions on plan 2.0.0.0 (24.07.2026)

New

Settings window integrated into the main command.

New

Redesigned the settings window in the configurations section.

New

Removed the command for editing settings.

Revit: Filter selection 1.5.0.0 (24.07.2026)

New

Plugin converted from palette mode to window mode.

Revit: Align Views 1.0.2.0 (23.07.2026)

Improved

Added consideration of the title block insertion point difference.

Fix

Fixed a viewport alignment error where their offset in the model was not taken into account.

Revit: View copy 2.6.3.0 (22.07.2026)

Improved

Added prevention of closing the window with Esc after duplication has started.

Revit: Sheet copy 4.10.3.0 (22.07.2026)

Improved

Added prevention of closing the window with Esc after duplication has started.

Revit: Apartment Typology 4.1.14.0 (22.07.2026)

Fix

Fixed an error where rooms could be merged into one apartment through windows placed in curtain walls.

Revit: Dimensions on plan 4.0.0.0 (22.07.2026) Read more

New

Added "Reinforcement" tab.

New

Added dimension type selection on all tabs.

New

Added processing of elements from linked files on all tabs.

New

Added "Transverse dimension from the wall end" option on the "Walls" tab.

New

Added "Consider view range" option on the "Walls" tab.

New

Added "Non-integer dimension values only" option on the "Walls" tab.

New

Added the ability to select the number of dimensions on the "Columns" tab when a column is intersected by a grid.

Improved

Changed the limitation principle of the free plugin version.

New

Added the "Update Elements" button.

New

Added the ability to ignore nested elements.

New

Added support for the view phase.

Improved

Added support for revision clouds.

Improved

Changed the appearance of the window.

Auto Updates Module 50.2.2.0 (13.07.2026)

Fix

Fixed internal errors.

Revit: Parametrization 4.1.33.0 (10.07.2026)

Improved

Added handling of the window/door phase when retrieving the value from the special ToRoom, FromRoom parameters.

Auto Updates Module 50.2.0.0 (10.07.2026)

Improved

Added handling of an open nanoCAD application.

Databases 3.3.1.0 (10.07.2026)

Improved

GOST R 52544 marked as "Inactive".

Fix

Fixed an error that occurred when filling parameters after canceling room selection.

Fix

Fixed an error that in some cases prevented the plugin from being relaunched.

Revit: Beams reinforcement 2.3.12.0 (29.06.2026)

Improved

Improved work with rectangular stirrups in transverse reinforcement settings.

Revit: Columns reinforcement 4.5.15.0 (29.06.2026)

Improved

Improved work with rectangular stirrups in transverse reinforcement settings.

Revit: Coloring elements 3.8.0.0 (27.06.2026)

New

Added the ability to collapse the window content.

Improved

Removed the application of random colors when copying a condition by parameter values.

Improved

Added the ability to mask one of the sides for the smart object "Break Line".

Improved

Added multiline support for the smart object "Multiline leader".

Improved

New

Added local logging.

Improved

Improved interaction under weak network connection.

AutoCAD: Notes 3.2.8.0 (16.06.2026)

Improved

Service update (internal changes).

Revit: Notes 1.6.9.0 (16.06.2026)

Improved

Added replacement or removal of characters invalid for saving in XML from the added note.

AutoCAD: Notes 3.2.7.0 (16.06.2026)

Improved

Added replacement or removal of characters invalid for saving in XML from the added note.

Revit: Model cleaning 2.31.0.0 (16.06.2026)

New

Added grouping of cleanup options in the "Basic cleaning" tab.

New

Added "Line Patterns" tab.

New

Reworked the cleanup option processing mechanism in the "Basic cleaning" tab.

Fix

Fixed an error with deleting the active view.

Fix

Fixed an error with deleting unused elements.

Fix

Fixed an error with deleting view templates.

Revit: Import from Excel 2.1.5.0 (16.06.2026)

Improved

Added an improvement to the schedule view import algorithm that prevents the appearance of empty rows.

Revit: Links manager 1.2.3.0 (15.06.2026)

Fix

Fixed an error where opening the plugin window caused Revit to freeze.

New

Added selection of recent values.

Improved

Improved UI/UX.

Improved

Migrated to standard ModPlus filters.

Improved

Improved work with configurations.

Fix

Fixed an error that occurred when insulation was present during intersection bypass creation.

Fix

Fixed an error that allowed selecting family instances of all categories when the "Beams and Columns" category was selected.

Fix

Fixed an error occurring when attempting to bypass a vertical column from a linked file.

Revit: Parametrization 4.1.31.0 (24.05.2026)

Fix

Correct handling of conditions with special characters (" and <>) inside operands.

AutoCAD: Block replace 2.1.5.0 (24.05.2026)

Fix

Fixed a bug where block definitions could be deleted prematurely.

Fixed an error where double-precision numbers with small values were processed incorrectly.

AutoCAD: Smart 3.1.3.0 (26.04.2026)

Fix

Multiline leader: fixed a bug where lines could shift from their positions when using certain fonts.

Revit: Walls reinforcement 6.1.12.0 (24.04.2026)

Fix

Fixed an error where upper and lower U-shaped bars were duplicated in the opening framing.

Revit: Base level 1.9.7.0 (23.04.2026)

New

Added processing for Railings.

Fix

Fix

Fixed an error where after duplicating a configuration, group changes were applied to both configurations.

AutoCAD: Smart 3.1.2.0 (18.04.2026)

New

Added the ability to set text style for the "Multiline leader" object.

Fix

Fixed a bug where the shelf width of the "Multiline leader" object could be calculated incorrectly.

Revit: Slabs reinforcement 3.3.13.0 (17.04.2026)

Fix

Fixed an error where the slab contour was not detected when reinforcing with multiple Area Reinforcement elements.

Revit: Working libraries for Revit 37.1.0.0 (17.04.2026)

Fix

Fixed excessive growth of autosave service log files and infinite attempts to save read-only documents.

AutoCAD: MultiOffset 1.0.0.0 (16.04.2026) Read more

Release

Release.

Revit: Parameters 2.13.4.0 (16.04.2026)

New

Family selection context: added the ability to select and delete multiple families.

New

Family editor: added support for multiple parameter selection in the parameter import window.

New

Parameter creation: added the ability to change the position of parameters in the table of created parameters.

Fix

Family editor: fixed an error where batch moving of parameters did not work in the parameter order change dialog.

Fixed "Method not found" error occurring in Revit 2027.

AutoCAD: Table sorting 1.0.0.0 (15.04.2026) Read more

Release

Release.

Revit: Walls reinforcement 6.1.11.0 (15.04.2026)

Improved

Added automatic expansion of the window content when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Slabs reinforcement 3.3.12.0 (15.04.2026)

Improved

Added automatic expansion of the window content when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Columns reinforcement 4.5.13.0 (15.04.2026)

Improved

Added automatic expansion of the window content when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Beams reinforcement 2.3.10.0 (15.04.2026)

Improved

Added automatic expansion of the window content when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Links manager 1.0.1.0 (15.04.2026)

Fix

Fix some bugs.

Revit: Split rebar 2.3.6.0 (14.04.2026)

Improved

Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Layer breaking 1.5.8.0 (14.04.2026)

Improved

Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Numbering 6.4.8.0 (14.04.2026)

Improved

Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched.

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: External dimensions on plan 1.8.1.0 (14.04.2026)

Fix

Fixed "Method not found" error occurring in Revit 2027.

Revit: Apartment Typology 4.1.7.0 (14.04.2026)

Improved

Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched.

Fix

Fixed an error where continuous numbering did not work when numbering along a curve.

New

Added new command "Finish Management".

New

Added new tab "Parameter Filling".

New

Added option to select bottom offset reference - from level or from bottom of room.

New

Added parameter value update for manually added finish elements.

New

Added progress counters for object processing within the drawing and for sheet merging.

New

Added the ability to cancel processing.

Fix

Fix

Element Filter: fixed a bug where elements were incorrectly filtered by parameters specified by system name in some cases.

Revit: Parameters 2.10.0.0 (25.03.2026)

Fix

Fixed a bug where errors occurring during a failed parameter definition change were not written to the results window.

New

Added "Select Views" buttons.

New

The Favorite Views list is now displayed as a tree, like the left panel.

Improved

Views are organized the same way as in the Project Browser, including dependent views, but views are selected and processed independently of each other.

Improved

View lists for assemblies are displayed the same way as in the Project Browser.

Fix

Fixed a bug with moving views to the Favorites list.

Revit: Parametrization 4.1.24.0 (17.03.2026)

Improved

Improved the conditional expression evaluation algorithm.

Revit: Working libraries for Revit 36.3.6.0 (17.03.2026)

Improved

Save Notification Service: added tracking of saves during synchronization.

Fix

Element Filter: fixed a bug where the "Does Not Equal Yes" check for Yes/No parameters was not working correctly.

Revit: Copy elements 3.3.1.0 (17.03.2026)

New

Added group copying.

New

Added Scope Box copying.

New

Added Project Browser organization copying.

Fix

Fixed a bug occurring when filter names match.

Revit: Structure to parameter 3.0.0.0 (17.03.2026) Read more

New

Added configurations.

New

Added drop-down lists for assigning parameters from available and matching data type options.

New

Added the ability to specify material layer types for writing to the structure.

New

Added the ability to enter text without numbering for the first line.

New

Added the ability to merge identical layers.

New

Added instance and type parameters for writing the result. The instance volume is written to the instance parameter, the total volume from all instances is written to the type parameter.

New

Added the ability to disable layer numbering.

New

Added the ability to display only structures that have been modified. Only for structure to parameter.

New

Added the ability to change the value of the selected material parameter when generating the structure.

AutoCAD: Smart 3.0.1.0 (16.03.2026)

Fix

Fixed a bug due to which the smart object "Arrow line" was paid.

AutoCAD: Standards 2.7.3.0 (15.03.2026)

Fix

Fixed a localization bug.

Revit: Worksets 3.4.5.0 (13.03.2026)

Improved

Service update.

Revit: Sheet copy 4.10.0.0 (13.03.2026)

New

Added the ability to find existing numbering in the sheet and view name and increment it.

New

Added the ability to copy floor plan views placed on sheets with the level changed to the one above.

New

Added the ability to search and replace in parameter values for copied schedules.

New

Added the ability to move sheet duplicates to other collections.

New

Added the ability to define a list of parameters whose values need to be cleared.

New

Added the ability to increment the value of schedule filters.

New

Added the ability to open created sheet duplicates after the plugin finishes.

New

Added the ability to keep the plugin window open after duplicating sheets.

New

Added the ability to increment parameter values.

New

Added the ability to increment values in sheet names.

Revit: View copy 2.6.0.0 (13.03.2026)

New

Added the ability to find existing numbering in the view name and increment it.

New

Added the ability to select view parameters for clearing values.

New

Added the ability to create floor plan views for upper levels.

New

Added the ability to increment the value of schedule filters.

New

Added the ability to open created view duplicates after the plugin finishes.

Revit: MEP Copy 2.1.5.0 (13.03.2026)

Fix

Fixed a bug that caused rectangular connectors to not connect in some cases.

AutoCAD: Smart 3.0.0.0 (13.03.2026) Read more

New

Added new smart object "Polar Axis".

New

Added new smart object "Multiline leader".

New

Added new linear smart object "Arrow line".

New

Added the ability to change common properties for multiple types of smart objects at once.

New

Added the ability to change the color of strokes and gaps in the "Waterproofing" object.

Improved

A grip for changing the hole type has been added to the "Hole filling" smart object.

Improved

The default hole type of the "Hole filling" smart object has been changed.

Fix

Fixed a bug that prevented setting a smart object style as current immediately after creation.

Fix

Fixed a bug occurring when entering an empty value in the linear smart object "Letter Line".

Revit: Working libraries for Revit 36.2.4.0 (12.03.2026)

Fix

Fix some bugs.

Revit: Working libraries for Revit 36.2.3.0 (11.03.2026)

New

Tab colorization: added the ability to change the size of the active tab.

New

Tab colorization: added the ability to change the opacity of inactive tabs.

Improved

Tab colorization: adjusted colors of standard color schemes.

New

Added a notification service for the need to save the document.

New

Added the ability to move each document to a new row in multi-row tab display.

New

Added the ability to color the right border and all four borders in tab coloring.

New

In tab coloring, the text color is now set for each fill color.

New

Added the ability to define custom settings for coloring family document tabs.

New

In the element filter by parameters, the validation logic for the key parameters Parent, Nested, Curtain, AreaScheme has been changed.

New

A new key parameter InMEPSystem has been added to the element filter by parameters.

New

A new special parameter InRebarSystem has been added to the element filter by parameters.

New

A new special parameter DocumentTitle has been added to the element filter by parameters.

New

The display of key parameters has been changed in the parameter selection control.

New

A condition has been added to the element filter by parameters to check whether a parameter is editable.

New

A control for searching parameter values has been added to the parameter filter settings window.

New

A "Clear" option has been added to the parameter filter settings window.

New

The storage principle for built-in command settings has been changed: previously enabled commands were saved, now disabled commands are saved.

New

Added a built-in command "Select System".

New

Added a built-in command "Apply to View" that allows setting the selected visibility range for the current view.

New

Search has been added to the "Favorite Commands" window.

New

Added a localized message in case it is impossible to update the link.

Revit: Parametrization 4.1.21.0 (27.02.2026)

Fix

Fixed an issue where it was impossible to remove internal insulation (external insulation was always removed).

Added family copying.

New

Added hatch pattern copying.

New

Added copying of conduit standards.

New

The plugin window is now modeless (does not block the Revit window).

Improved

Removed the event log.

Improved

Added switching to the target document.

New

Added a new command "Update Room Finishing".

New

Added the ability to specify multiple bases for finishing walls and set a filter for the bases.

New

Added skirting board creation.

New

Added the option "Extend floor to the middle of the door leaf".

New

Added the ability to set a negative ceiling offset.

New

Added the ability to set a negative offset for finishing walls.

New

Added the ability to create finishing walls as compound walls and to use compound walls as a base.

New

Added the option "Process floor-to-ceiling windows".

New

Added creation of finishing walls above curtain walls.

New

Added the ability to sum areas by levels in multi-level apartments.

New

In all sources and classification conditions, the ability to duplicate records in tables has been added.

New

Added the ability to populate the "Functional purpose" parameter for rooms whose names are present in the current room matrix.

New

A button has been added in the room matrix to select a room name from the list of room names of the current document.

New

Added the ability to use numbers with leading zeros in apartment numbering.

New

Added the ability to keep apartment types unchanged during recalculation.

New

Room numbering settings have been added. They include number format settings and the ability to reset numbering in multi-level apartments.

Improved

Consideration of minimum and maximum area boundary values when classifying apartments.

Improved

Improved analysis of openings that lack a reference to the host object.

Fix

Fixed an issue where apartment numbering worked incorrectly in some cases.

Fix

Sorting has been removed from the classification conditions table.

Fix

Some bugs have been fixed.

Renga: Batch Sheets Export 3.2.0.0 (04.02.2026)

New

On the "By sections" tab, the ability to export to dwg and dxf has been added.

Revit: Working libraries for Revit 34.2.3.0 (03.02.2026)

Fix

Fixed an issue where nested categories were not recognized when inserting categories from a string in the element filter.

AutoCAD: Select similar 1.11.2.0 (03.02.2026)

New

Added the ability to determine matching of dynamic blocks by different parameter types.

New

A new command "Quadrilateral by points" has been added.

New

A new command "Create objects at intersection points" has been added.

New

The method of obtaining curves and objects from the user in the command "Split curve at intersection points" has been changed. It is now possible to select multiple polylines, and an additional selection has been added for objects that will be considered when determining intersections. If nothing is selected in the second selection, all objects in the drawing will be considered.

New

In the command "Building the middle line", the dialog at the end of execution has been removed. It has been replaced with command-line input with "Yes" set by default.

New

A bug has been fixed in the command "Building the middle line" that caused the last point not to be calculated.

New

Added support for inclined lines.

New

Added tolerance for cell boundaries.

Fix

Fixed an issue where text rotation was incorrectly detected in custom coordinate systems.

Auto Updates Module 47.0.0.0 (20.01.2026) Read more

New

Added the "Plugins" menu item.

New

Added the "Menu" menu item.

New

Added the "Personal account" menu item.

New

Added "General settings", "License server settings", and "Proxy settings".

New

Removed the "Open Configurator" menu item.

New

The Configurator has been removed from the "Components" section, from the overall version calculation, and from update checks.

New

The Configurator has been removed (it will be deleted by the auto-update module).

AutoCAD: Working libraries for AutoCAD 14.2.2.0 (16.01.2026)

Fix

Fix

Fixed an error where detail lines and model lines were not processed.

Revit: Sheet numerator 3.2.7.0 (22.12.2025)

New

Added the ability to sort sheets by name when displaying all sheets in a single group.

Fix

Fixed an error where sheets from assemblies were not displayed when there were no regular sheets in the project while displaying sheets in a single group.

Revit: Parametrization 4.1.11.0 (22.12.2025)

New

Optimized search for element relationships.

Fix

Fixed an error during export of results to Excel that occurred with a large number of element identifiers.

Fix

Fixed some errors.

Auto Updates Module 46.5.0.0 (21.12.2025)

Improved

Service update.

Revit: Numbering 6.3.4.0 (12.12.2025)

Fix

Fixed an error where in some cases elements were sorted incorrectly in the view.

AutoCAD: Auto layers 3.7.10.0 (12.12.2025)

Fix

Fixed a bug that caused the delete button for the layer rule by block name to remain permanently inactive.

New

Added the ability to collapse/expand the window content.

Improved

Correct handling of families whose geometry consists of nested families.

Fix

Fixed an error where previews for the side and top additional elements of the drawing format were not displayed.

Revit: Sheet export 5.8.8.0 (28.11.2025)

New

Added the "PDF creation timeout" option to the settings.

Revit: Parameters 2.9.25.0 (27.11.2025)

New

Family selection context: added the "Current Family" option.

Improved

Family parameter editor: parameter formula value updated when a family is removed from the list.

Improved

Project parameter creation: changed availability of the "Values can vary by group" property when changing the "Instance/Type" property.

Fix

Fixed an error where an extra action was removed from the changelog when pressing "Cancel" in the family editor.

Fix

Fixed an error where backup copies of families were not deleted in some cases.

Fix

Family editor: fixed an error where parameter usage in element reference parameters was not detected.

Revit: Layer breaking 1.5.6.0 (26.11.2025)

Improved

Added adjustment of the direction of created walls to match the direction of the original wall (only for straight walls).

Improved

Added ignoring of warnings that may appear when restoring inserts.

Fix

Fixed an error where the plugin window could be opened multiple times.

Revit: Section annotation 2.0.0.0 (26.11.2025)

New

Added options "Top face only", "Bottom face only", "Top and bottom faces" for Elevations in the "Floors" category.

New

Added the ability to specify two Elevation types and an option defining the minimum allowable distance between Elevations.

New

Added the ability to choose different Elevation types for the top and bottom faces in the "Floors" category.

New

Added the ability to create tags without a leader.

New

Added the ability to merge dimensions with the same spacing for the "Structural Rebar" category.

New

Added the ability to use "Multi-Rebar Annotations".

New

Added the ability to delete previously created annotations.

New

Added handling of pipes.

New

Added handling of cable trays and ducts.

New

Added handling of the "Furniture" and "Generic Models" categories.

Redesign of the "Components" and "Changelog" windows completed.

New

Added the ability to select multiple walls.

New

Added creation of column elevations.

New

Added information about selected rooms.

New

Improved

Service update due to replacement of auxiliary library to prevent conflicts with other plugins.

AutoCAD: Draworder by layer 1.3.4.0 (17.11.2025)

Improved

Service update due to replacement of auxiliary library to prevent conflicts with other plugins.

Renga: Working libraries for Renga 13.1.0.0 (17.11.2025)

Improved

Service update due to replacement of auxiliary library to prevent conflicts with other plugins.

Revit: Working libraries for Revit 34.2.0.0 (17.11.2025)

Improved

Fixed an error that occurred in some cases when launching settings in Revit 2019.

New

Added handling of preselection in the "Align Vertical" command.

New

Added cycling in the "Align Vertical" command.

Revit: Split by height 1.6.4.0 (12.11.2025)

Fix

Fixed a localization error.

Revit: Apartment Typology 3.8.3.0 (12.11.2025)

New

Added consideration of the current design option when collecting rooms.

Renga: Search by condition 4.0.0.0 (11.11.2025) Read more

New

The main search functionality has been replaced with the object filter.

New

Configurations added.

New

Added support for Organization Settings.

Renga: Working libraries for Renga 13.0.0.0 (10.11.2025)

Improved

Service update.

Renga: Working libraries for Renga 12.0.0.0 (10.11.2025)

Improved

Service update.

Renga: Working libraries for Renga 11.0.0.0 (10.11.2025)

New

Added support for Renga version 8.9.

AutoCAD: Dwg base 2.1.4.0 (10.11.2025)

Improved

Added the ability to close the window by pressing the Esc key (configured by general settings).

Added a brightness slider to the condition by parameter values.

New

Added the option "Replace filters when names match".

New

Added the ability to set a filter name in the condition by parameter value.

New

Added an option to get parameter values from elements of linked files.

New

Added a context menu to fill pattern and line type to apply settings to all positions.

New

Added the ability to process multiple selected views.

Revit: View filters 2.7.2.0 (28.10.2025)

Improved

Hiding templates/views without filters in the left list.

Improved

Changes have been made to the full version verification algorithm of the plugin.

Revit: Filter selection 1.4.2.0 (22.10.2025)

New

Added the ability to duplicate filters.

New

The filter selection area has been replaced with dual call buttons.

New

Added selection options as a dropdown list: Select, Select from selected, Add to current selection, Exclude from current selection.

Renga: View orientation 2.1.1.0 (22.10.2025)

Improved

Service update.

Revit: Commands 1.4.11.0 (22.10.2025)

Improved

Changes have been made to the full version verification algorithm of the plugin.

AutoCAD: Calculator 1.5.4.0 (22.10.2025)

Improved

Considering the separator from dimension settings when retrieving the value from a dimension.

AutoCAD: Numbering 1.12.4.0 (21.10.2025)

New

Added new ways to select text objects.

New

Added the ability to choose which position will be used for sorting/filtering block attributes: the attribute position or the block position.

New

Added new features for table numbering.

New

Added the ability to search for elements within filters by layer/color/layouts/block attributes.

New

Added buttons for quick selection, deselection, and selection inversion in filters by layer/color/layouts/block attributes.

New

Added saving of selected filters by layer/color/layouts/block attributes within one session in one document.

New

Added preview when sorting by position on the curve.

Revit: Warning manager 1.2.7.0 (21.10.2025)

Fix

Fixed an error where in some cases the workset selection window appeared after closing the plugin window.

Fixed an error where presets created in Revit in another language were not loaded (only for presets created after the update).

Revit: Apartment Typology 3.7.3.0 (16.10.2025)

Improved

Added rounding options with 4 and 5 decimal places.

Revit: Apartment Typology 3.7.2.0 (16.10.2025)

Fix

Fixed an error where the original room area was retrieved inaccurately.

Fix

Fixed an error where floor openings were included in processing.

Revit: Apartment Typology 3.7.0.0 (15.10.2025)

New

Retrieving the original room area considering Revit’s internal rounding algorithms.

Revit: Working libraries for Revit 33.2.24.0 (15.10.2025)

Improved

Added log deletion by timer with a 4-hour interval in the autosave service.

Added cycling in the "Align" command.

New

Removed the "Model Comparison" tab.

New

Added the ability to collapse/expand window content.

New

Added presets.

New

Added the ability to delete selected types.

New

Added the ability to display only unused types.

New

Added the ability to copy values.

Improved

Added sorting by number of elements.

Revit: Working libraries for Revit 33.1.22.0 (24.09.2025)

Fix

Ignoring errors when attempting to close a view through the context menu of the active tab.

Revit: Numbering 6.2.14.0 (24.09.2025)

New

Added handling of the "Number" parameter for rooms located in a group.

Revit: Search and replace 2.12.1.0 (22.09.2025)

Fix

Fixed an error in processing search by selected elements in the schedule filter.

Revit: Search and replace 2.12.0.0 (22.09.2025) Read more

New

Added the ability to use wildcards for searching and replacing parts of text.

New

Added multiple search.

New

Added search and replace in filter names.

New

Added replacement of system names.

New

Added replacement of the system name.

New

Added support for Renga versions.

New

Added multi-selection with Shift and Ctrl.

Renga: Levels 2.0.0.0 (19.09.2025) Read more

New

Added support for Renga versions.

Renga: Last 2.0.0.0 (19.09.2025) Read more

New

Added support for Renga versions.

New

Added the ability to clear lists for selected and hidden elements.

New

Added "Favorites" tab.

Renga: Batch Sheets Export 3.0.0.0 (19.09.2025) Read more

New

Added support for Renga versions.

AutoCAD: Dwg base 2.1.2.0 (08.09.2025)

Improved

Added the ability to collapse/expand the window contents.

Improved

Added the ability to open the user folder.

Improved

Added the property "path" to the element in the database.

Improved

Added the ability to recreate the preview of a downloaded element in the database.

Revit: Working libraries for Revit 33.1.20.0 (08.09.2025)

Improved

Built-in commands: added an additional check of belonging to the host when searching for reinforcement in the host.

Revit: Room finishing 1.0.8.0 (05.09.2025)

Fix

Fixed floor extension into French windows.

Fix

Fixed incorrect height of finish walls when using a base of multiple walls with different heights.

Revit: Copy crop extents 1.5.8.0 (05.09.2025)

Improved

Added handling of rotation of the source and target views.

Revit: Parametrization 4.0.0.0 (04.09.2025) Read more

New

Added validation functionality.

New

Added "Step-by-step calculation" of formulas.

New

Added export of parametrization results to Excel.

New

Added the ability to specify linked files in which elements will be searched.

New

Added search and multi-selection in the view selection window.

Improved

Added automatic selection of views highlighted in the project browser to the view selection window.

Improved

Added case sensitivity when retrieving a parameter from an element.

Improved

Added grouping of functions by type and sorting of functions within a group in the instruction table of contents.

Improved

Error generation if the label %NO_PARAMETER% is present in an arithmetic expression.

Fix

Fixed an error where arithmetic expressions were incorrectly recognized if the system decimal separator was set to a comma.

Fix

Fixed an error where the results window always recorded a positive result for SUM and JOIN functions, even if the function processing failed.

Fix

Fixed an error where multiple SUM and JOIN functions in one formula were processed in reverse order.

AutoCAD: Numbering 1.5.4.0 (04.09.2025)

Fix

Fixed bug that could occur when starting the plugin in a document with frozen layers.

Fix

Fixed bug where filtering of dynamic blocks was not possible.

AutoCAD: Numbering 1.5.2.0 (03.09.2025)

New

Added filter by layouts.

New

Added filter by block attributes.

New

Added sorting method by layouts.

New

Added ability to sort in reverse order.

Improved

Added distance preview for filter by distance from curve.

Fix

Fixed bug where initial value could not accept fractional value with comma.

Revit: Working libraries for Revit 33.1.19.0 (03.09.2025)

Improved

Service update.

Revit: Slabs reinforcement 3.3.6.0 (03.09.2025)

Fix

Fix some bugs.

Revit: Tagless elements 1.1.4.0 (01.09.2025)

Fix

Fix some bugs.

Revit: Change font 2.6.3.0 (29.08.2025)

New

Fix

Fixed a bug where the instruction on the "AP_Rounded area" tab was not restored.

Revit: Apartment Typology 3.6.0.0 (05.08.2025)

New

Added the ability to use room filter by parameters on the "Apartment Collection" and "Calculate Apartments" tabs.

New

An additional "AP_Rounded area" tab has been added to the "Calculate Apartments" tab, allowing calculation of only the rounded area for specified rooms.

Revit: Copy crop extents 1.5.6.0 (05.08.2025)

New

Added tabs "Open Views" and "Views in Project".

New

Added view search by name.

New

Added ability to copy grid crop regions.

Fix

Fixed incorrect handling of dependent views.

Fix

Fixed some bugs.

Revit: Parameters 2.7.16.0 (04.08.2025)

Improved

In the parameter import window from the specified family, search by parameter name has been added.

New

Added filters to nearly all columns.

New

Create parameters in families: added "Report Parameter" property.

New

Edit parameters in families: added "Set Formula" and "Clear Formula" actions.

Improved

Family backup creation via file copy instead of invoking "Save" command.

Improved

Removed automatic reading of current family when launching plugin in family. Added restriction on switching between family-related sections.

Revit: Base level 1.8.3.0 (07.07.2025)

Fix

Fix some bugs.

Databases 3.3.0.0 (07.07.2025)

New

Added GOST 35087.

New

Added GOST 31416.

Improved

Changed the release year for GOST 26633.

Improved

GOST 57837 marked as "Not valid".

Revit: Base level 1.8.2.0 (07.07.2025)

Fix

Fix some bugs.

Revit: Parameters 2.4.9.0 (07.07.2025)

Fix

Fixed an error that occurred when starting the plugin when there are no open documents in Revit.

Revit: Parameters 2.4.8.0 (03.07.2025)

Improved

Service update.

Revit: Parameters 2.4.7.0 (03.07.2025)

New

Added "Check all" and "Uncheck all" buttons to the family selection dialog from project browser.

Improved

Added "All Parameter Definitions" group to the parameter selection dialog from shared parameter file.

Improved

Family Editor: improved the parameter name search algorithm in other parameters' formulas.

Revit: Import from Excel 2.0.0.0 (03.07.2025) Read more

New

Added a new command "Import to Schedule".

New

Added the ability to insert a table into a legend.

New

Added the ability to create pseudo-schedules.

New

Added the ability to specify a cell range for import.

New

Added the ability to consider view scale when importing into a drafting view or legend.

New

Added image processing.

New

Added the ability to open the folder with the source file.

New

Improved

Service update.

Auto Updates Module 44.1.0.0 (26.06.2025)

Fix

Fix some bugs.

Auto Updates Module 44.0.0.0 (26.06.2025)

New

Improved

Removed the ability to show all plugins in the right list on the "Adaptation" tab.

Improved

Replaced Export/Import icons on the "Adaptation" tab.

Improved

Dip mark: added ability to display tail zeros.

Revit: Dim offset 6.3.6.0 (11.06.2025)

Fix

Fixed a bug where dimensional text was not offset if the current view was opened in a detached window.

AutoCAD: Smart 2.5.8.0 (10.06.2025) Read more

New

Added a new smart object "Weld designation".

New

Added a new smart object "Weld Leg".

New

Added a new smart object "Hole Filling".

Improved

Dip mark: added ability to override text.

Improved

Search: only object types present in the current drawing are now displayed in the list of smart objects.

Improved

"Smart properties" item has been added to the context menu.

New

Added support for Polyline3d, Polyline2d.

New

Elements filter: added conditional parameters "Curtain", "Nested", "Parent".

New

Added ability to disable specific built-in commands.

New

Added 8 new built-in commands.

New

Added "Close windows by pressing the Esc key" option to settings.

New

Favorite commands: adding buttons that are menu items in the source menu.

Revit: MEP split 1.1.0.0 (28.05.2025)

New

Fix

Fixed incorrect offset of 3D shape when moving the survey point in Revit 2022 and earlier versions.

Revit: Coloring elements 3.1.11.0 (15.05.2025)

Family editor: redesign of the parameter list.

New

Family editor: added various options for replacing one parameter with another..

New

Family editor: added possibility to delete unused parameters.

New

Family editor: added ability to change parameter position and move parameters between groups.

New

Family selection context: added ability to select families from the Project Browser.

New

Batch editors: added presets and preset storage with support for Organization Settings. Export and import is available in each section.

New

Batch editors: redesigned the system for adding actions.

New

Formula editor: added buttons for inserting parameters and formulas.

New

New

Added ability to set the position of built-in commands in the panel.

Improved

Favorite commands: do not unpack ModPlus "Hide Categories" and "Show Categories" commands.

Fix

Elements filter: fixed element filtering bug when using group conditions with check for empty value.

AutoCAD: Auto layers 3.5.6.0 (21.04.2025)

Improved

Removed support for revision clouds in AutoCAD versions lower than 2021.

Revit: Parametrization 3.10.8.0 (20.04.2025)

Fix

Fixed an error occurring when processing the ROUND function if the second argument is written with a space.

Revit: Sheet export 5.5.5.0 (18.04.2025)

Improved

Added recognition of system parameter names (BuiltInParameter) in file masks.

Revit: Worksets 3.4.1.0 (18.04.2025)

New

Added sorting of worksets in alphabetical order within a group.

New

Workset processing: Added "Elements" column showing the number of elements in the workset.

Exclude anonymous blocks from the block list.

New

Added the ability to change the segment type of linear objects to arc segments.

Do not synchronize views if one of the views is a sheet.

Revit: Parametrization 3.10.4.0 (30.03.2025)

Improved

Added the ability to remove insulation by setting an empty value.

New

Fix

Fix some bugs.

Revit: Model cleaning 2.27.1.0 (25.03.2025)

New

Added search in all sections.

New

Added "Project parameter" column in the "Shared parameters" section.

New

Added "Unplaced areas" section.

Improved

Added the ability to rename a configuration in the "Basic cleaning" section.

AutoCAD: Polylines 1.3.13.0 (21.03.2025)

Improved

Service update.

Revit: MEP clash solver 2.6.2.0 (21.03.2025)

New

Bypass widening in the longitudinal direction of the bending element at angles from 80 to 110 degrees.

AutoCAD: Polylines 1.3.12.0 (21.03.2025)

New

New

Added logging of the autosave service operation to a file.

Improved

Offset segment text to the side of the outermost segment if the text of the outermost segment has been offset to the outside of the segment.

Improved

Pre-resetting the text position when using the "Offset Selected" command.

Revit: Side of the world 2.1.0.0 (02.03.2025)

The button to open the dialog box for editing custom print formats has been moved to Settings.

Revit: Numbering 6.1.10.0 (26.02.2025)

Fix

Fix some bugs.

Revit: Sheet export 5.1.3.0 (26.02.2025)

Fix

Fixed a bug where the color edit button became inactive when the "B/w with exclusion" print option was selected.

Revit: Sheet export 5.1.2.0 (26.02.2025)

New

Added "Grayscale with exclusion" print option.

Improved

Added check for the presence of the Title Block on the sheet when using the "Print Current" command.

Fix

Fixed a bug that caused a hang if a generated file name had a space at the end of it.

Revit: Apartment Typology 3.1.1.0 (25.02.2025)

Fix

Fix some bugs.

Revit: Sheet export 5.0.0.0 (24.02.2025) Read more

New

Export instead of print in Revit 2022 and higher.

New

Removed format detection algorithms.

New

Added option to export to document location folder.

New

Added option with behavior after export to settings.

New

Added display of the number of selected sheets in the header of each document if more than one document is open.

New

Added option to delete documents from the list of open documents.

New

Added option to select sheets by filter.

New

Added the ability to set the file name mask by organization settings.

New

Added the ability to insert a sheet parameter into the merged file name mask.

Improved

Improved algorithms for exporting sheets with several Title Blocks.

Improved

Improved algorithm for printing in "black-and-white with exception" mode.

Improved

Added output of the document location directory in the plugin window.

Improved

Added bold highlighting of the active sheet.

New

Added the ability to set values for key parameters of Rebars.

New

Added possibility to set parameters of Rebars in Area Reinforcement.

Revit: Columns reinforcement 4.4.0.0 (10.02.2025)

New

Added the ability to set values for key parameters of Rebars.

Revit: Beams reinforcement 2.2.0.0 (10.02.2025)

New

Added the ability to set values for key parameters of Rebars.

Revit: Parametrization 3.8.0.0 (07.02.2025) Read more

New

Added Parts strategy.

New

New

Added configurations with support for Organization settings.

New

Removed the tab "Views of apartments".

New

Added "Classification" tab.

New

The "Parameters" tab is divided into "Mandatory Parameters" and "Additional Parameters".

New

Added the ability to mark rooms as "Mezzanine".

New

Added built-in service that changes apartment ID when copying rooms.

New

Added selection of apartments on the "Collection", "Calculation", "Editor", "Classification" tabs when selecting the room included in the apartment in the model.

New

Added a built-in "Select Apartment" command that enables to select the entire apartment, which includes the selected room.

New

New locking principle - locked apartments are ignored in the calculation process.

New

Added possibility to set conditions for area and "Mezzanine" property in "Contains rooms" and "Not containing rooms" conditions (Apartment Types, Classification).

New

Added possibility to use the total area of the apartment without a coefficient when determining the type of apartment.

New

Apartment editor: added grouping by functional purpose.

New

Apartment editor: added display of rooms included in the apartment.

New

Apartment editor: added possibility to remove a room from an apartment with recalculation of apartment characteristics.

New

Apartment editor: added possibility to recalculate selected apartments.

New

Apartment editor: added possibility to remove selected apartments (i.e. to reset all parameters related to the Apartment Typology).

New

Auto Updates Module 40.0.1.0 (31.12.2024)

Fix

Fix some bugs.

Auto Updates Module 40.0.0.0 (30.12.2024)

New

Improved

Redesign of the localization language selection drop-down list.

Revit: Working libraries for Revit 31.0.2.0 (23.12.2024)

Improved

Redesign of the localization language selection drop-down list.

AutoCAD: Working libraries for AutoCAD 14.0.1.0 (23.12.2024)

Improved

Redesign of the localization language selection drop-down list.

Configurator 25.2.7.0 (23.12.2024)

Improved

Redesign of the localization language selection drop-down list.

Revit: Sheet numerator 3.1.2.0 (09.12.2024)

New

Added grouping of sheets that are in assemblies.

Improved

Rollback of intermediate changes in case of an unexpected error in move renumbering.

AutoCAD: Smart 2.0.1.0 (09.12.2024)

Fix

Crested leader: fixed a bug where minimum distances were not correctly taken into account when specifying the scale.

Revit: Parametrization 3.3.11.0 (05.12.2024)

Fix

Fixed a bug where fields were not imported when importing from Excel.

AutoCAD: Smart 2.0.0.0 (04.12.2024) Read more

New

PRO version.

New

Added new smart object (PRO) “Pile Mark”.

New

Added new smart object “Crested leader”.

New

Added new smart object “Dip mark”.

New

Added “Find and replace” command (instead of “Search by value” command).

Improved

Added copying of line color and thickness when creating a analogy.

Improved

Node designation: added double-click editor.

Fix

Level mark on plan: fixed a bug where it was not possible to set a mark value greater than 5 through the properties palette.

Fix

Letter line: fixed text spacing at scale.

Revit: Parametrization 3.3.10.0 (03.12.2024)

Improved

Updating the German language instruction.

Revit: Wall layouts 2.6.5.0 (03.12.2024)

New

Added configurations.

New

Added grouping of sheets that are in assemblies.

New

Added ability to specify a symbol to separate numbering or not to separate numbering with a symbol.

New

Added ability to reset the temporary view of duplicated Views and Legends.

New

Added search and replace in Text Notes.

New

Added search and replace in Sheet, View, Legend parameters.

Improved

Some icons have been replaced.

Improved

Changed order of configuration editing buttons.

Revit: Parametrization 3.3.9.0 (26.11.2024)

Improved

Some icons have been replaced.

Improved

Changed order of configuration editing buttons.

Fix

Fixed a bug where, in some cases, determining the position of an element inside the solid of another element did not work correctly.

Revit: Sheet export 4.13.4.0 (26.11.2024)

Improved

Some icons have been replaced.

Improved

Changed order of configuration editing buttons.

Fix

Fixed a bug that caused sheets to regenerate after closing the plugin.

Revit: Worksets 3.0.4.0 (26.11.2024)

Improved

Some icons have been replaced.

Improved

Changed order of configuration editing buttons.

Revit: Copy values 1.15.7.0 (26.11.2024)

Fix

Fixed an error occurring when trying to open a folder in Revit 2025.

Revit: Dimensions by line 3.2.6.0 (25.11.2024)

Improved

Correct processing of walls that are parallel to the current section.

Fix

Fixed a bug that occurred when creating stirrups if reinforcement creation in intersections was enabled but intersection analysis was not performed.

Fix

Improved

Connect connectors: Added ability to connect connectors of different shapes.

AutoCAD: Specifications 2.1.8.0 (18.11.2024)

Rewritten formula processing algorithm.

New

Added new results window.

New

Added possibility to write the result to a conditionally initial element.

New

Added new functions: REPLACE, FORMAT, CV.

New

Added new strategies: CurtainWallComponents, OneToMany.

New

Added strategy filters.

New

Added possibility to use Excel file as a data source in a formula.

New

Added export and import of configuration.

New

Added other features.

Improved

Various design changes and improvements.

New

Added possibility to change the height of "Recent" and "Favourites" rows (without saving).

Improved

Changed the principle of sending plugin usage statistics.

Revit: Working libraries for Revit 30.2.12.0 (30.10.2024)

Fix

Fixed some bugs in elements filter.

Revit: Sheet export 4.10.14.0 (30.10.2024)

Improved

Elements filter: added "Electrical equipment" category to the list of element-host categories.

Revit: Wall layouts 2.6.4.0 (02.10.2024)

Improved

The maximum offset value has been increased to 2000.

Improved

Added sorting of view templates in alphabetical order.

AutoCAD: Block replace 2.0.1.0 (02.10.2024)

Improved

Processing pre-selected objects as replaceable.

Revit: Elements join 1.14.4.0 (02.10.2024)

Improved

The category “Windows” has been added to the list of categories to cut out.

Revit: Worksets 3.0.0.0 (01.10.2024)

New

Added the ability to create worksets by the name of linked documents.

New

Added ability to duplicate groups.

New

Added ability to duplicate configurations.

New

Expanded Organization settings.

New

Added ability to collapse/expand window contents.

Improved

Workset processing: added sorting of worksets in alphabetical order.

Improved

Workset processing: do not close the window after commands are executed.

Improved

Workset processing: fixed a bug where multiple copies of the plugin window could be opened.

Revit: Utilities for working with rebar 2.3.2.0 (01.10.2024)

New

Maintaining the position of displaced rods after a set has been exploded or split in Revit 2022 and higher.

New

Added ability to disable the results window when changing the presentation.

New

Added ability to skip sets of two rods when changing the presentation.

Revit: Split rebar 2.3.3.0 (01.10.2024)

New

Added ability to copy values of shared parameters from rebar to the Structural Rebar Coupler.

New

Added saving of visibility state on all views.

Improved

The rebar selection window has been replaced with a pop-up dialog box.

Fix

Fixed a bug where in some cases rebar was displaced if the “Spread of Rebar joints” option was enabled.

Revit: Rebar solid and visible 3.4.0.0 (30.09.2024)

New

Added processing of Structural Rebar Couplers.

Revit: MEP split 1.0.0.0 (30.09.2024) Read more

Release

Release.

Configurator 25.2.4.0 (27.09.2024)

Fixed an error occurring when selecting elements from a linked file.

Revit: Spot dimensions 1.5.0.0 (17.09.2024)

New

Added possibility to specify the position of Spot Diemsions for floors.

New

Added possibility to specify the position of Spot Diemsions for MEP elements.

New

Processing of faces instead of edges for solid elements.

New

Creating a Spot Dimension from the extreme point of the element geometry.

Revit: Walls reinforcement 6.0.10.0 (17.09.2024)

Improved

Layout of U-shaped bars of horizontal reinforcement taking into account the cover at the ends of horizontal reinforcement.

Revit: Search and replace 2.4.3.0 (12.09.2024)

New

Added “Check all” and “Uncheck all” options.

New

Added search in Schedules name and headers.

Fix

Fixed a search error with the "Whole Word" option enabled.

Revit: Sheet numerator 3.0.1.0 (11.09.2024)

Improved

Selection of the current sheet in the tree when opening the plugin.

AutoCAD: Totals 3.0.8.0 (11.09.2024)

Fix

Fixed an error occurring if a drawing has blocks with a name error.

Revit: Batch Rename 1.4.0.0 (11.09.2024)

New

Added the ability to check (or uncheck) selected items in lists.

Revit: Working libraries for Revit 30.1.5.0 (10.09.2024)

Improved

Prohibit changing the backup folder in the Autosave service settings if the path is set by the organization settings.

Improved

More correct processing of environment variables set in the Autosave service settings.

AutoCAD: Block replace 2.0.0.0 (10.09.2024)

New

Added plugin settings window instead of command requests.

New

Added ability to replace objects (circle, ellipse, point) with a block.

New

Added ability to copy values of identical attributes from the block being replaced to the block it replaces.

Revit: Wall layouts 2.6.2.0 (10.09.2024)

Fix

Fix some bugs.

Revit: Sheet numerator 3.0.0.0 (10.09.2024) Read more

New

Added support for sheet collections in Revit 2025.

New

Added the ability to rename a sheet.

New

Added the ability to delete a sheet.

New

Added the ability to not change the number in simple numbering, allowing only the Prefix and/or Suffix to be set to an existing sheet number.

New

Added ability to insert non-printable characters in Prefix/Suffix during simple numbering.

New

Added the ability to decrease or increase the number of sheets in a group by a specified value.

Improved

Changed the licensing system (30 days trial period).

Revit: Copy sheets to documents 1.10.2.0 (09.09.2024)

New

Added three new built-in commands.

New

Added clipboard support in elements filter.

New

Added category sets in elements filter.

New

Added support for Organization Settings with autosave service.

New

Added synchronization with Revit options in the Tabs visibility service.

Revit: Walls reinforcement 6.0.8.0 (02.09.2024)

Fix

Fixed a bug where the rebar type set in the settings was not taken into account when bending vertical bars into a slab above it.

Revit: Coloring elements 3.0.4.0 (02.09.2024)

Fix

Fixed resetting of some parameters when duplicating configurations.

Fix

Fixed plugin freezing in some cases when selecting a line type.

Revit: Numbering 6.1.8.0 (02.09.2024)

Improved

Added processing of Multi-Rebar Annotations.

Fix

Fix some bugs.

AutoCAD: Formats 2.15.8.0 (28.08.2024)

Fix

Fixed an error occurring when inserting a stamp if the current layer is locked.

Revit: Walls reinforcement 6.0.6.0 (27.08.2024)

Fix

Fixed a bug where vertical reinforcement length limitations under the first opening and over the last opening were not taken into account.

Added ability to specify line type.

New

Added ability to select elements by filter.

New

Added support for Organization Settings.

Improved

Display of types in alphabetical order.

New

Added display of parent tab name in command line mode.

Improved

Integration of rebar shapes into reinforcement settings.

New

Changed licensing principle.

New

Added settings storage.

New

Redesigned the list of transverse reinforcement details.

New

Added possibility to set a different diameter in the top row.

New

Added ability to create details in beam intersections.

New

Many other fixes and improvements.

Revit: Columns reinforcement 4.0.0.0 (02.08.2024) Read more

New

New algorithms for creating rebars.

New

Integration of rebar shapes into reinforcement settings.

New

Changed licensing principle.

New

Added settings storage.

New

Added possibility to create longitudinal reinforcement with individual bars.

New

Added possibility to set protective layer based on reinforcement settings.

New

Redesigned the list of transverse reinforcement details.

New

Added possibility to create an odd number of working reinforcement bars in circular columns.

New

Added possibility to specify the direction of bending of longitudinally bent bars.

New

Many other fixes and improvements.

Revit: Slabs reinforcement 3.0.0.0 (02.08.2024) Read more

New

New algorithms for creating rebars.

New

Integration of rebar shapes into reinforcement settings.

New

Changed licensing principle.

New

Added settings storage.

New

Rewritten the algorithm for generating background reinforcement.

New

Added option not to cut U-shaped bars with the slab body.

New

Many other fixes and improvements.

Revit: Walls reinforcement 6.0.0.0 (02.08.2024) Read more

New

New algorithms for creating rebars.

New

Integration of rebar shapes into reinforcement settings.

New

Changed licensing principle.

New

Added settings storage.

New

Added automatic selection of underlying slabs.

New

Added processing of openings created in wall sketch.

New

Added possibility to place stirrups and U-bars in opening framing with the step of background reinforcement.

New

New

Removed intermediate archiving of downloaded installation files.

New

Removed auxiliary downloading of updates from the web service.

Improved

Fixed various bugs and made improvements to the update algorithm.

Revit: View filters 2.4.16.0 (25.07.2024)

Improved

Display filters in the order specified in the view settings (Revit 2021 and above).

AutoCAD: Smart 1.28.24.0 (25.07.2024)

Improved

Level mark: added ability not to create a bottom shelf.

Revit: Dim offset 6.3.0.0 (25.07.2024)

Fixed color of text in tooltips.

Fix

Improved

Added additional entries to the log of the autosave service.

Fix

Fixed time format in the log of the autosave service.

Revit: Copy along Curve 1.0.0.0 (17.06.2024) Read more

Release

Release.

Revit: Search and replace 2.2.2.0 (17.06.2024)

New

Added ability to process Text Annotations using regular expressions.

AutoCAD: Draworder by layer 1.3.0.0 (16.06.2024)

New

Added ability to sort the list in ascending or descending order.

New

Added export and import of sets.

New

Added the ability to select all target documents.

Improved

Suppression of the window with a message about repeating types when the "Suppress warnings" option is enabled.

Revit: Wall layouts 2.5.2.0 (09.06.2024)

Fix

Correct location of Elevations/Sections when selecting rooms from a linked file inserted with an offset.

Auto Updates Module 38.3.2.0 (05.06.2024)

Fix

Fixed a bug where the ModPlus folder size was calculated incorrectly.

Revit: Parametrization 2.31.6.0 (05.06.2024)

Improved

Add strategy description to exported excel file.

Improved

Include strategy description from imported excel file when importing strategies or importing rules with replacement.

AutoCAD: Smart 1.28.22.0 (04.06.2024) Read more

New

Added new smart object "Revision mark".

New

Added new smart object "Node designation".

Improved

Using auxiliary graphics when moving points of linear objects.

Improved

Secant nodal leader: added possibility to set text indent.

Improved

Correct processing of multi-line text borders.

Fix

Fixed window design in dark design themes.

Fix

Fixed a bug where it was possible to run search commands multiple times.

Fix

Fixed a bug in changing the direction of linear objects that are scaled to a different scale.

Revit: Wall layouts 2.5.1.0 (30.05.2024)

New

Added possibility to connect elements not only in vertical MEP curves.

Fix

Fixed an error that occurred in some cases when rotating fittings with a longitudinal connection.

Fix

Corrected a bug that prevented connected elements from rotating to a rotating fitting in some cases..

Revit: View sync 1.4.8.0 (24.05.2024)

Fix

Fixed a bug where the window width was incorrectly changed.

Revit: View sync 1.4.7.0 (24.05.2024)

Fix

Fixed a bug where open views were not added to the list of views.

Revit: View sync 1.4.6.0 (24.05.2024)

New

Added ability to minimize window contents.

New

Built-in commands: added selection of the host for rebars in the system.

Fix

Elements filter: fixed the design of the parameter selection list in the dark theme.

New

Added ability to compare more than two models.

New

Added ability to select multiple categories for filtering.

New

Added ability to select Type instances in a model and copy their IDs to the clipboard.

New

Added ability to save selected columns.

New

Added ability to change the Type name.

Improved

Added processing of "Workset" parameter.

Fix

Fixed a bug where underscores were not displayed in column names.

Renga: Batch Sheets Export 2.3.2.0 (14.05.2024)

New

Added output of sheets that do not have a section assigned to them.

Improved

Added section sorting.

New

Added ability to export sheets by sections to pdf and oxps.

New

Added ability to export sheets to a single pdf file.

New

Added sets that allow to save position and state of sheets.

New

Added ability to drag and drop sheets in the list.

New

Added ability to open a folder after exporting.

New

Added algorithm for determining the dimension direction relative to the element.

New

Added "Offset selected" command.

Improved

Added processing of pre-selected dimensions when manually offsetting or restoring dimension text.

Improved

Changed text offset direction for some cases.

Revit: Numbering 6.1.5.0 (03.05.2024)

Fix

Fix some bugs.

Revit: Numbering 6.1.4.0 (03.05.2024)

Improved

Added processing of groups when numbering by curve.

Fix

Fixed a bug where multiple copies of the plugin could be run.

Revit: Parameters 1.5.5.0 (02.05.2024)

New

Create parameters in project: added possibility to select all categories in the list.

Improved

Create parameters in project: the button for editing the list of categories has been moved to the list of parameters.

Added connector check in the "Connect connectors" command.

Revit: Notes 1.6.8.0 (28.04.2024)

Fix

Fixed a bug where multiple copies of the plugin could be run.

Revit: MEP Copy 1.0.1.0 (27.04.2024)

Fix

Fixed an error occurring when copying some families.

Revit: Base level 1.5.2.0 (26.04.2024)

Improved

Added the ability to select the top level for the Telephone Devices category.

Revit: Base level 1.5.1.0 (26.04.2024)

Fix

Correct processing of families without host.

Revit: Base level 1.5.0.0 (23.04.2024)

New

Added the ability to change the top constraint.

Revit: Apartment Typology 2.7.4.0 (23.04.2024)

Improved

Added the ability to add incorrect rooms located on a different level to an apartment.

Revit: MEP rotate 2.3.0.0 (18.04.2024)

Removed the mechanism for selecting elements for bending via the element selection event.

Fix

Fixed a bug where ducts were rotated in some cases.

Revit: Tools 2.27.2.0 (08.04.2024)

Fix

Added missing icon for dark design theme.

Revit: Tools 2.27.1.0 (08.04.2024)

Improved

Moving the cursor to the "Switch to 2D" button in the "Grid mode" command.

Revit: Tools 2.27.0.0 (08.04.2024)

New

Added large icons for all commands except "Hide" and "Show" commands.

New

Added "Unhide elements" command.

New

Added processing of fittings for pipes, ducts and cable trays in the "Sum of lengths" command.

Revit: Merge dimensions 1.5.9.0 (07.04.2024)

Improved

Avoiding zero dimensions when selecting dimensions.

Revit: Elements join 1.13.7.0 (05.04.2024)

New

Added sorting of configurations.

Fix

Fixed a bug where in some cases a message would appear that nothing had been processed.

Fix

Fixed a bug where multiple copies of the plugin window could be launched.

Revit: Working libraries for Revit 24.1.1.0 (05.04.2024)

New

Added a built-in command that allows you to update the Link.

Fix

Fixed a bug where the displayed value of category list and parameters for elements filter did not change after duplication.

Revit: Room volume 1.4.6.0 (05.04.2024)

Fix

Fixed a bug where volume views for rooms from a linked file were incorrectly displayed.

Revit: Room volume 1.4.5.0 (04.04.2024)

New

Processing of rooms and spaces taking into account the phase of the current view.

Improved

Added a border for the element that allows you to set a color.

Fix

Fixed a bug where previously created volume views were not deleted if they were not present in the current list.

Revit: Dimensions by line 3.2.1.0 (04.04.2024)

New

Moving the cursor to the "Continue" button when opening the plugin window.

Two commands merged into one.

New

Added line preview on the plan.

New

Added work in the family editor.

New

Added new categories.

New

Added organization settings.

New

Added ability to undo changes made to the configuration.

Revit: Warning manager 1.2.3.0 (01.04.2024)

New

Added Select, Delete, Colorize option for Warnings and Warning groups.

New

Added the ability to update the Warning list.

Improved

The "Isolate" option has been moved to the bottom of the window in a separate button.

New

Fixed some bugs.

Revit: View sync 1.3.4.0 (29.03.2024)

Fix

Fixed a bug where it was possible to run multiple copies of the plugin.

Revit: MEP rotate 2.1.0.0 (29.03.2024)

New

A function for determining the direction of rotation in scenarios with two possible directions has been added to the "MEP Rotation in direction" command.

Revit: Export to Excel 2.1.0.0 (29.03.2024)

Added setting configurations.

New

Added Schedule sets for reselection.

New

Added ability to export Title and Footer.

New

Added ability to save formatting.

New

Plugin window is made non-blocking Revit.

Fix

Fixed errors with data type conversion.

New

Added ability to synchronize view crop and 3D view section box.

Fix some bugs.

Revit: Show views on 3D 1.1.11.0 (13.03.2024)

Fix

Fixed a bug where underscores were not displayed in view names.

Revit: Apartment Typology 2.7.0.0 (12.03.2024)

New

Disabling auto calculation service during synchronization.

Revit: MEP clash solver 2.3.5.0 (12.03.2024)

Fix

Fix some bugs.

Revit: MEP alignment 1.1.2.0 (12.03.2024)

New

The option "Group transactions" has been added to the "Multibuild" command.

Improved

Optimized the function of setting the vertical distance between MEP curves in the "Set distance" command.

New

The "Favorite Commands" service has been reworked.

New

New items were added to the active tab context menu.

New

Added the ability to separately enable moving backup files and moving backup folders in the autosaver.

New

In the category selection dialog, added the ability to check categories whose elements are present in the current view .

Revit: Graphics Override manager 1.1.4.0 (04.03.2024)

Improved

Decreased the minimum allowable window width.

Revit: Numbering 6.0.1.0 (01.03.2024)

Improved

Alphabetic numbering.

New

New sorting algorithm on views.

New

Grouping by parameter.

New

Added option to specify side offset.

New

Added possibility to use source element parameters in the layout name.

Improved

Exclusion of unlocated and redundant rooms from processing.

Improved

Exclusion of Zones from processing.

Improved

Improved algorithm for obtaining the room contour.

Fix

Fixed a bug where all rooms were selected instead of rooms in the current view.

Revit: Apartment Typology 2.5.16.0 (05.02.2024)

Fix

Fix some bugs.

Revit: Tools 2.24.5.0 (02.02.2024) Read more

New

Added "Merge splines" command.

New

Added "Electrical Devices" item to the "Hide/Show category" command.

Improved

Changed the icon of the "Sum of lengths" command.

Improved

Accounted for the "Select pinned" option in the "Select annotations" command.

Auto Updates Module 36.4.0.0 (01.02.2024)

Improved

News window redesign.

Revit: Working libraries for Revit 22.1.1.0 (31.01.2024)

Fix

Elements filter by parameters: fixed an error when spaces in checked values were not saved.

Revit: Parametrization 2.30.2.0 (31.01.2024)

Improved

Boolean parameters in conditions can be checked with 0 and 1, Yes and No, True and False.

New

Added ability to use Unicode characters in the prefix or suffix of a sheet number.

New

Added ability to search and replace in legend name.

New

Added ability to search and replace in filters of duplicated schedules.

New

Added the ability to abort the duplication procedure.

New

Added ability to select specific views placed on a sheet for processing.

Improved

Automatic selection of a sheet when changing the name of a sheet in the tree.

Fix

Fixed a bug where separated schedules were inserted incorrectly.

Revit: MEP rotate 2.0.0.0 (26.01.2024) Read more

New

Added "Edge-mounted Tray " command.

New

Added "MEP Rotation in direction" command.

AutoCAD: Smart 1.26.16.0 (24.01.2024) Read more

New

Added new smart object "Concrete joint".

New

Added new smart object "Thick arrow".

New

Drawing only the last segment when creating linear objects.

Fix

Fixed a bug where some smart objects remained in the drawing when the command to create them was canceled.

Added option to settings to enable case-sensitive search.

New

When adding parameters from the SPF, parameters already existing in the current document are marked (only for projects).

Fix

Fixed a bug where there were unnecessary data types in the parameter data type selection dialog in the "Common" category.

Fix

Fixed an error in creating parameters with the "Other" group in Revit 2022.

Revit: Parametrization 2.29.12.0 (16.01.2024)

New

Added arithmetic function POW (ascending to a degree).

New

Added ability to specify values in the "Workset" parameter.

New

Added the ability to specify the type parameter forcibly.

Improved

Improved algorithm of processing IF and FIRSTTRUE functions taking into account the presence of non-calculated contents.

Fix

Fixed a bug in the NestedFamilies strategy where nested families were not processed if no parent family filter was specified.

Fix

Ignored an error occurring in some versions of Revit when running the InRoom strategy in a document.

Fix

Fixed a bug where fields in the favorites list were not being added.

Fix

Fixed a bug where parameters and functions could be inserted into a field when the formula editor was active.

Working libraries for Revit 22.0.0.0 (16.01.2024) Read more

New

Elements filter: added possibility to use conditional parameters ID, TypeID, Group, Assembly.

New

Built-in commands: adding commands to a separate panel.

New

Built-in commands: added "Select Rebars" command.

Built-in commands: fixed the appearance of the "Select elements" command for beam systems in Revit 2019.

AutoCAD: Block replace 1.3.0.0 (09.01.2024)

Fix

Correct processing of dynamic blocks when replacing similar blocks.

Renga: Filter 1.1.1.0 (05.01.2024)

Fix

Fixed incorrect counting of the number of selected objects.

Renga: Search by condition 1.4.0.0 (04.01.2024)

New

Added search among selected objects.

Improved

Added search of numeric values as string values.

Improved

Added saving of search string.

Renga: Filter 1.1.0.0 (04.01.2024)

Fixed a bug where in some cases the integer and fractional part separator specified in the settings was not taken into account..

Working libraries for Revit 20.1.3.0 (19.12.2023)

Improved

Elements filter: case-sensitive checking of string parameter values.

Working libraries for Revit 20.1.2.0 (18.12.2023)

Improved

Fixed the algorithm for selecting nested components of the built-in "Select Components" command.

Working libraries for Revit 20.1.1.0 (18.12.2023)

Fix

Fix some bugs.

Working libraries for Revit 20.1.0.0 (17.12.2023) Read more

New

Added new built-in commands .

Fixed an error occurring when trying to edit the parameter comparison table.

Fix

Fixed an error occurring in some cases when trying to retrieve a parameter data type.

Revit: Sheet copy 2.24.0.0 (16.11.2023)

New

Saving Schedule Graphics splits (Revit 2023 and higher).

Revit: Type manager 1.0.0.0 (16.11.2023) Read more

Release

Release.

Revit: Change font 1.0.4.0 (14.11.2023)

Improved

Taking local fonts into account when filling the font list.

Improved

Added the ability to print in the font selection list.

Revit: Notes 1.6.7.0 (12.11.2023)

New

Added ability to specify horizontal alignment for created text.

New

Added ability to specify list type for created text.

Improved

Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins.

AutoCAD: Notes 3.2.5.0 (12.11.2023)

Improved

Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins.

AutoCAD: Auto layers 3.2.3.0 (10.11.2023)

New

Added Revision Cloud processing.

Improved

Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins.

Added search for redundant and not enclosed rooms on the "Initial check" tab.

New

Added ability to set table name by sheet name when importing sources from Excel.

Improved

Improved algorithm for determining whether apartments can be combined into multilevel apartments.

Improved

Use of three auxiliary lines instead of one when searching for the intersection of an opening and a room.

Fix

Fixed a bug that could erase sources.

Revit: Section annotation 1.9.14.0 (03.11.2023)

Fix

Fix some bugs.

Revit: Base level 1.3.7.0 (03.11.2023)

Improved

Added processing of cable tray fittings.

Fix

Fixed errors when linear elements were processed incorrectly.

Working libraries for Revit 19.0.0.0 (03.11.2023) Read more

New

Added built-in commands.

New

Active tab context menu: added "Close the other tabs of the current document" option.

Added selection of elements when selecting the "Selected elements" option, if the elements were not selected before running the plugin.

Improved

Added output of processed elements identifiers in the result window.

Revit: Parametrization 2.25.0.0 (27.10.2023)

Improved

Edits were made to the algorithm for calculating mathematical expressions to take into account the use of the comma as a decimal separator of numerical values.

Revit: Parametrization 2.24.11.0 (25.10.2023)

New

Added "Decimal separator of numeric values" option to the general settings.

New

Added "Use the geometry of nested families if the family has no geometry" option to the general settings.

New

Added the option to set a custom description for strategies.

New

Added "Select all" and "Unselect all" buttons for the list of strategies.

Improved

Added processing of the reference parameter "Subcategory" of reinforcing bars.

New

Added new tab coloring schemes for the dark theme in Revit 2024 and higher.

Fix

Fixed default tab colors for dark theme in Revit 2024 and higher.

Fix

Fixed design errors in the settings window on the "Coloring tabs" tab for dark theme design.

Revit: Show views on 3D 1.1.8.0 (23.10.2023)

Fix

Correct DirectShape creation when the project base point is offset.

Fix

Correct DirectShape creation with respect to the range of plans visibility.

Fix

Fixed "Element elementId not found in this Document" error.

Working libraries for Revit 17.0.1.0 (23.10.2023)

Fix

Active tab context menu: fixed an error that opened a folder with a document instead of copying the path to the clipboard.

Working libraries for Revit 17.0.0.0 (21.10.2023) Read more

New

Added built-in "Active tab context menu" service.

Revit: Walls reinforcement 5.24.12.0 (20.10.2023)

Improved

Increased the maximum value of anchoring of joints to the Floor faces from 300 to 1000 mm.

Revit: Walls reinforcement 5.24.11.0 (20.10.2023)

Improved

Increased the maximum value of anchoring of joints to the Floor faces from 200 to 300 mm .

Fixed a bug that caused incorrect calculation of the number of parts in the "Maximum height" algorithm.

Revit: Context filter 2.0.3.0 (18.10.2023)

Improved

Added tooltip with parameter name in parameter tree.

Revit: Apartment Typology 2.2.3.0 (17.10.2023)

Improved

Service update.

Revit: Tools 2.22.3.0 (17.10.2023)

Improved

Added processing of imported categories to the Hide Links/Show Links command.

Revit: Tools 2.22.2.0 (16.10.2023)

New

The "Raster images" category has been added to the Hide/Show command.

New

The "Annotations" category has been added to the Hide/Show command.

New

Added "Change language automatically" option to settings .

New

Added support for Renga Standard and Renga Professional.

New

Added possibility to set 3D crop box by view visibility range.

Improved

Added processing of Engineering Plans.

Improved

Added tolerance when checking the intersection of 3D view boundaries and view visibility range.

New

Redesigned some windows.

Improved

Removed display of news if any window is open.

Improved

Removed Hardcodet.Wpf.TaskbarNotification.dll library.

Improved

Removed display of "500 Internal Server Error" error .

Improved

The DWG/DXF export settings option "Export views on sheets and links as external references" has been added to the main plugin window.

Fix

Fixed a bug where it was not possible to save a print set.

Removed automatic area recalculation service.

Fix

Fixed a bug where parameters were opened incorrectly in Notepad.

Revit: Sum of parameters 1.0.0.0 (30.08.2023) Read more

Improved

Added sorting of documents by alphabetical order.

Improved

Added sorting of groups in the selection tree by alphabetical order.

New

Improved

Added processing of selection filters on the “View filters” tab.

Revit: Copy elements 2.0.0.0 (05.08.2023) Read more

New

Added ability to duplicate filters and views.

New

Added ability to use sets.

New

Added ability to copy DWG/DXF, DGN export options.

New

Redesigned settings. Added tooltips to settings options.

Revit: Sheet export 4.7.10.0 (05.08.2023)

Fix

Fixed a bug where Revit would fatally close after closing the plugin window.

Revit: Sheet export 4.7.9.0 (04.08.2023)

New

The plugin window is made non-modal (does not block the Revit window).

Improved

Added display of a warning icon in case the export directory does not exist.

Fix

Fixed some bugs.

Revit: Fill patterns 1.5.14.0 (04.08.2023)

Improved

Added stretch hatch preview in the create from drafting view window.

Revit: Wall layouts 2.2.7.0 (02.08.2023)

New

Added possibility to set reverse order of sweep creation.

Improved

Algorithms of Curtain Walls processing improved.

Working libraries for AutoCAD 11.5.0.0 (02.08.2023)

Fix

Fixed an issue that caused AutoCAD to fatally close after closing the ModPlus settings window when using a license server and Classic mode is enabled.

Revit: Context filter 2.0.2.0 (01.08.2023)

Fix

Fixed a bug where unnecessary parameters could be added to the "Same parameters" list in certain conditions.

Revit: Context filter 2.0.1.0 (01.08.2023)

Improved

Added display of the number of values of same parameters.

Revit: Context filter 2.0.0.0 (31.07.2023) Read more

New

Added window mode.

New

Added context for searching elements by view filters on the current view.

New

Added context for searching elements by ModPlus filters on the current view and in the model (only in window mode)..

New

Added ability to search for the same parameters with the same values for multiple categories.

New

Added ability to save presets without parameter values.

Improved

Added check if the group, assembly, or sketch editing mode is active before launching the context filter.

Improved

Expanded the list of view types on which the context filter does not run.

Improved

Removed support for Revit 2017-2018.

Fix

Fixed design in dark design theme.

Revit: Walls reinforcement 5.24.9.0 (29.07.2023)

Fix

Fixed some bugs in UI.

Revit: Sheet export 4.6.7.0 (28.07.2023)

New

Added "Export current" button to allow exporting the current sheet of the current document to PDF.

New

Added check that the file is busy when creating a merged PDF.

New

Fix

Fixed some bugs in the algorithm of room contour detection.

Auto Updates Module 29.0.0.0 (19.07.2023)

New

Added search for installed Revit versions in the HKEY_CURRENT_USER registry hive in case there are no entries in the HKEY_LOCAL_MACHINE hive.

New

Links to related news have been added to the change story.

Improved

Small changes in the design of the change story.

Configurator 19.0.0.0 (19.07.2023)

New

Added search for installed Revit versions in the HKEY_CURRENT_USER registry hive in case there are no entries in the HKEY_LOCAL_MACHINE hive.

New

Links to related news have been added to the change story.

Improved

Small changes in the design of the change story.

Improved

Changed appearance of the list of supported products (removed grouping by version)..

Revit: Sheet export 4.2.4.0 (19.07.2023)

Fix

Do not create an "All Sheets" folder.

Revit: Wall layouts 2.1.6.0 (18.07.2023)

New

Added option to not create a sheet to place a created view.

New

Added the ability to change the algorithm for determining the print format for specific sheets.

New

Added ability to change the "Colors" option for selected sheets in the list.

New

Added settings for processing sheets that contain temporary mode views.

New

Added printing options.

New

Added an option to remember the selection in the dialog box with a prompt to open the export folder.

Improved

A third state was added for sheet group checkboxes.

Improved

Removed "Center" option.

Improved

Removed "Content trim" setting.

Improved

If the group name contains only invalid characters and the option to create a folder by group name is enabled, the folder name will be "Incorrect group name".

Improved

If the sheet has several Title Blocks and only one of them is printed, there will be no index added to the file name.

New

The "Links" category has been added to the Hide/Show command.

Improved

Additional verification of saved data in the view restore command.

New

Added dimensioning for walls.

New

Added dimensioning for floors.

Added new functions: STRINDEX, VALUESTR, EINDEX.

New

Added dark theme support in formula editor.

New

Added save of selected configuration.

New

Added "Check all" and "Uncheck all" buttons for rule list.

New

Added an icon to display fields in the formula editor that are in the favorites list.

New

Added opportunity to launch Favorites Fields editor from the settings dialog.

New

Added an option to update a favorite field in all rules of all configurations.

New

Formula: added possibility to escape double quotes.

New

Formula: added check for unescaped parentheses that do not relate to functions.

New

Formula: extract all values in double quotes from a formula before checking and processing.

New

Formula: added ability to use "Starts with", "Ends with", "Not starts with", and "Not ends with" conditions.

Improved

Displaying a formula when a rule is selected in a list.

Improved

Swapped user and system strategy names in the list of strategies.

Improved

Added safe plugin launch: if an error occurs while reading the configuration file, the plugin will be closed without saving.

New

Added new auxiliary methods used in plugins.

New

Added ability to add/delete commands by clicking on the "heart" icon in the "Favorite Commands" window.

New

Elements filter: added button in the list of categories to display checked categories.

New

Elements filter: added filtering condition "Absence of parameter".

Revit: Floor by Room 1.9.9.0 (26.05.2023)

Improved

Added ignoring the warning about intersecting Floors.

Revit: Parametrization 2.5.14.0 (26.05.2023)

Fix

Fixed an error that occurs when trying to get the value of a integer parameter of an element of a Structural Connection, when the parameter has never been set to a value.

Revit: Slabs reinforcement 2.19.5.0 (26.05.2023)

Improved

Improved algorithm for determining the contour of the slab.

Revit: CAD manager 2.0.0.0 (25.05.2023)

New

Rewritten plugin architecture. Faster removal of a large number of Imports.

New

Added search by Import ID or view ID.

New

Added button to open the folder with the source file for the Import that is inserted as a link.

New

Added display of the number of visible and total number of Imports in the list.

Improved

Small changes in the design of the Import list.

Fix

Fixed an error that would reset filters after Imports were deleted.

Revit: Elements join 1.12.2.0 (24.05.2023)

Improved

The "Structural foundation" category has been added to the list of allowable "What to cut" categories on the "Cut" tab.

Revit: Dim offset 5.2.1.0 (23.05.2023)

Improved

Increased horizontal text offset value for the middle segments of the dimensional chain.

Revit: Beams reinforcement 1.18.10.0 (23.05.2023)

Improved

Added ability to specify a fractional value for the transverse reinforcement indent from the end of the beam.

Fix

Fixed an error that, in some cases, incorrectly defined an indent from the end of the beam.

Revit: MEP clash solver 2.2.13.0 (22.05.2023)

Fix

Fixed a bug that created a vertical bend instead of a horizontal one in some cases.

Revit: Export to Excel 1.3.3.0 (19.05.2023)

New

Selection of schedules for export is made through checkboxes.

New

Added possibility to specify the name of the exported file.

Fixed bug in UI.

Revit: Columns reinforcement 3.22.6.0 (09.05.2023)

New

Using the orientation of the hooks inherent in the type of rebar when creating stirrups with hooks.

New

Added an option to collapse/expand the window content.

Revit: Beams reinforcement 1.18.8.0 (09.05.2023)

New

Using the orientation of the hooks inherent in the type of rebar when creating stirrups with hooks.

New

Added an option to collapse/expand the window content.

Fix

Fixed a bug where stirrups could not be created depending on the direction of the beam.

Revit: Walls reinforcement 5.24.6.0 (09.05.2023)

New

Using the orientation of the hooks inherent in the type of rebar when creating stirrups with hooks.

New

Added an option to collapse/expand the window content.

Fix

Fixed a bug that didn't determine overhead floors for walls that are less than one meter high.

Fix

Fixed an error that incorrectly determined the angle of diagonal rebars.

Revit: Floor by Room 1.9.8.0 (07.05.2023) Read more

New

Door direction accounting.

New

Cutting solid door geometry.

Improved

Trimming along room separators.

Revit: Dim offset 5.1.0.0 (06.05.2023)

New

When calculating free space in an adjacent segment, a two character margin is added to the length of the segment string value.

New

Added the ability to lock viewports on imported sheets.

New

Deleting layouts in unsaved drawings before importing sheets.

Improved

Corrects the position of content on imported layouts if the Title Block graphics are offset from the origin of the Title Block block.

Revit: Elements join 1.11.8.0 (12.04.2023)

New

New

Added support for Revit 2024.

Revit: Tools 2.19.4.0 (08.04.2023)

Improved

Building a Ribbon tab considering the design theme in Revit 2024.

Revit: Copy elements 1.16.3.0 (07.04.2023)

New

Correct replacement of types of element instances when the "Allow duplicates" option is enabled.

Added ability to delete all strategies in configuration.

New

Added ability to take the value of a reference element parameter.

New

Added ability to copy/paste rules via clipboard.

Improved

Changed the algorithm for checking arguments by "Equal", "Not equal" conditions - if arguments are not checked as strings, they are checked as numbers, only if one of the arguments is a number.

Improved

The integer format of rounding in the ROUND function.

Improved

Improved pattern of the curly brackets processing.

Fixed some errors when using the "Spread of Rebar joints" option.

Revit: Sheet export 3.3.6.0 (24.03.2023)

Added ability to create an export subfolder by current date (date and time, date, time).

New

Removed the preset window. Collection settings moved to the plugin window.

New

Added reading sheets by button with the ability to enable automatic reading sheets at startup.

New

Added an option to check all selected sheets.

New

Added ability to save selected or checked sheets as a print set.

New

Added saving color scheme by sheets.

New

Added ability to create different configurations of settings.

New

Added export to DWF/DWFx.

New

Added PDF trimming to fit the content (enabled in settings).

New

Added ability to set merged file name mask (PDF, DWF, DWFx).

New

Added an option to use project parameters (project information) in the filename mask and in the merged file name mask.

New

Added possibility to use system variables and date items in the filename mask and in the merged filename mask.

New

Added generation of bookmarks by sheets in a merged PDF.

Improved

The license is checked when running the command, before the plugin window is displayed.

Improved

Removed support for PDF-Xchange Lite printer.

Improved

Added export folder preview (example).

Improved

Changed appearance of format switches.

Improved

Output a warning message if the file name mask does not contain the sheet parameters.

Improved

The field with the export folder name is made editable.

New

Rewritten algorithm for determining slab contours.

New

Added an option to collapse/expand the window content.

Revit: Slabs reinforcement 2.16.17.0 (27.02.2023)

Improved

Edits were made to the algorithm for determining the boundary of the slab.

Revit: Parametrization 2.0.4.0 (27.02.2023)

Added automatic closing of modeless windows opened via a special auxiliary method when closing all documents in Revit.

Added search and replace in generic annotations.

New

Added search and replacement in viewport view name.

New

Added search and replace in sheet number.

New

Added an ability to copy element identifier to clipboard.

New

Added ability to call the element display function.

Improved

Save search settings.

Improved

Moved focus to the plugin window after closing the results window.

Revit: Split by height 1.1.0.0 (18.02.2023)

New

Added the ability to set the spread for rebar joints.

Fix

Fixed a bug that caused some characters to be deleted from a masked pdf file name.

Configurator 14.4.0.0 (31.01.2023)

New

Creating subfolders in an export folder.

New

Merging pdf files.

New

Print from multiple open files.

New

Print from linked files.

New

Printing in pdfs along the outline of the Title Block.

New

Print to multiple pdf files from a single sheet (along the outline of the Title Blocks).

New

Monochrome pdf printing with color exclusion.

New

Selecting colors for each sheet.

Improved

Do not close Views that were open before starting the export.

Revit: Fix duplicates 1.4.3.0 (15.01.2023)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Revit: Floor by Room 1.6.6.0 (15.01.2023)

New

Added possibility to copy parameter values from rooms to created floors.

Improved

Removed "Top of all windows" property from the plugin window.

Improved

Added localized display for "Blocks" and "Drawings" groups in the tree.

Revit: Slabs reinforcement 2.16.14.0 (10.01.2023)

Fix

Ignoring some errors in the parameter copying command.

Revit: Copy values 1.15.4.0 (07.01.2023)

Fix

Fixed the error of displaying the delete parameter button in composite copying rules after loading a saved configuration.

Configurator 14.3.0.0 (06.01.2023)

Improved

Authorization in the personal account after loading plugins.

Improved

Added a link to the company on LinkedIn.

Auto Updates Module 22.7.0.0 (06.01.2023)

New

Added a button to go to the plugin page in the new plugins installation window.

Improved

Removed restart with administrator rights.

Improved

Added removal of the EPPlus.dll library to the cleaning application.

Revit: Fill patterns 1.5.12.0 (06.01.2023)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Revit: CAD manager 1.4.2.0 (05.01.2023)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Revit: Batch Rename 1.3.2.0 (05.01.2023)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

AutoCAD: Tables 1.9.4.0 (03.01.2023)

Fix

Version of dwg file with tables was lowered.

Revit: Sheet numerator 2.7.7.0 (01.01.2023)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

2022 Year

Revit: Copy sheets to documents 1.6.7.0 (30.12.2022)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Revit: Section annotation 1.9.9.0 (29.12.2022)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Fix

Fixed an error saving user configurations.

Fix

Fixed a bug that prevented rebars from being processed in some sections.

Revit: Parametrization 1.8.22.0 (27.12.2022)

Improved

Removed spaces trim of arguments when processing IF, FIRSTTRUE, LSTR, RSTR, SSTR arguments.

Revit: Parametrization 1.8.21.0 (26.12.2022)

Improved

Using the average geometric centroid of composite solids in cases when it was not possible to obtain the centroid of a combined solid.

AutoCAD: Smart 1.21.7.0 (25.12.2022)

Improved

Set the current text style of the document, if the text style is not set from the style of the smart object.

Fix

Fix some bugs.

Revit: Coloring elements 2.10.10.0 (25.12.2022)

New

Added an option to set the coloring area - lines or surfaces.

New

Added ability to drag and drop conditions in the list.

New

Added ability to duplicate configuration.

New

Added an option to disable the setting of a Shaded Visual Style for the View when creating view filters.

New

Added the ability to set the name of the view filter in the standard conditions.

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Improved

Added remembering of the selected configuration.

Improved

Fix

Fix some bugs.

AutoCAD: Smart 1.21.5.0 (22.12.2022) Read more

New

Added new smart object "Chain leader".

New

Added double-click editing window for the "Weld joint" smart object.

Improved

Updating smart object graphics in a model when using the REGEN command.

Fix

Fixed an error which caused the grips of the "Level mark" smart object to be displayed incorrectly.

Added command access settings on the ribbon.

Revit: Numbering 5.2.6.0 (19.12.2022)

New

Separator (dot or comma) specified in the initial value is taken into account when setting string parameters.

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Revit: Worksets 2.5.4.0 (19.12.2022)

Fix

Fix the "Update worksets" command launching error.

Revit: External dimensions on plan 1.7.8.0 (19.12.2022)

Fix

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Fix

Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file.

Fix

Fixed an error that processed columns that were not checked in the group.

Revit: Beams reinforcement 1.16.7.0 (16.12.2022)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Fix

Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file.

Fix

Fixed an error that processed beams that were not checked in the group.

Revit: Slabs reinforcement 2.16.13.0 (16.12.2022)

Improved

Changed icons.

Fix

Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file.

Revit: Walls reinforcement 5.19.55.0 (16.12.2022)

Improved

Improved algorithm for finding openings.

Fix

Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file.

Auto Updates Module 22.6.6.0 (16.12.2022)

Improved

Do not display the "Open Configurator" menu item if a blocking application is open.

Revit: Parametrization 1.8.18.0 (15.12.2022)

Changes were made to the algorithm for determining the location of families in space.

Revit: Walls reinforcement 5.19.53.0 (11.12.2022)

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Fix

Fix

Fixed a pipe processing bug.

Revit: Apartment Typology 1.10.8.0 (09.12.2022)

Fix

Fixed apartment unlocking bug.

Revit: Slabs reinforcement 2.16.11.0 (09.12.2022)

Improved

Added command access settings on the ribbon.

Fix

Fix some bugs.

Revit: Wall layouts 2.0.0.0 (08.12.2022)

New

Redesigned UI.

New

Reworked the algorithm for creating wall layouts by rooms.

New

Added ability to specify a name for the layout.

New

Added possibility to process multiple selected rooms.

New

Added possibility to select rooms in active view.

New

Added an option to use the filter by parameters for rooms in the active view mode.

New

Added saving of a selected template and sheet.

Revit: Worksets 2.5.3.0 (08.12.2022)

New

Added the ability to specify how to apply a workset - to instances and/or types - for link files.

Revit: Room volume 1.1.3.0 (07.12.2022)

New

Added Space processing.

Improved

Changed icons.

Improved

Removed volume check for Solids for Rooms and Spaces.

Revit: Worksets 2.4.3.0 (01.12.2022)

New

Added the ability to apply worksets to elements on the active view.

New

New

Added roof processing.

Revit: Base level 1.1.0.0 (30.11.2022)

New

Added floor processing.

Revit: Base level 1.0.0.0 (30.11.2022) Read more

Release

Release.

Revit: Apartment Typology 1.10.7.0 (29.11.2022)

Fix

Fix some bugs.

Revit: MEP connect 1.3.5.0 (28.11.2022)

Fix

Fix some bugs.

Revit: Copy values 1.15.3.0 (28.11.2022)

Improved

New features have been added to the element filter, which will be used in plugin development.

Improved

A warning icon has been added to the "Autosave" tab in the settings window if the backup storage folder has been deleted or renamed.

Revit: Parametrization 1.8.13.0 (26.11.2022)

New

New functions added: SMIRRORED, TMIRRORED, LSTR, RSTR, SSTR.

Revit: Dimensions by line 2.6.8.0 (26.11.2022)

New

Added processing of the "Stair Railings" category.

Improved

Added category sorting in settings.

Improved

Changed icons.

Icons changed.

Revit: Apartment Typology 1.10.5.0 (24.11.2022)

Improved

The algorithm for determining the room boundary has been amended to take into account cases where the original boundary contains segments that are less than 1 foot long.

Improved

Changed icons.

Improved

Added command access settings on the ribbon.

Data bases 3.2.0.0 (24.11.2022)

Improved

Changed icons.

Improved

Fix

Fix some bugs.

Revit: Parametrization 1.7.1.0 (08.11.2022)

Improved

Changes have been made to the algorithm for determining relationships between elements, taking into account that instances of families can also be the Hosts.

Revit: Floor by Room 1.5.4.0 (07.11.2022)

New

Added possibility to set an offset from the Floor thickness.

New

Added ability to move configurations in the list.

New

Added processing of Curtain Walls.

Improved

Improved the algorithm for creating floor leads in doorways, taking into account openings placed on the wall end and balcony blocks.

Fix

Fixed "The referenced object is not valid, possibly because it has been deleted from the database, or its creation was undone" in Revit 2019.

Revit: Copy values 1.14.14.0 (05.11.2022)

New

Added support for Organization Settings.

New

Added copying variant "From group to children".

New

Added button to open configuration storage folder.

New

Target parameter prefix and suffix added to all types of copy rules.

New

Rounding the result before writing to the target parameter added to all types of copy rules.

Improved

Ignoring the warning about the repeated value of the "Mark" parameter.

Improved

Prohibited running the plugin in the family editor and on some views.

Fix

Fixed some bugs in the window design.

Revit: Tools 2.18.8.0 (02.11.2022)

New

Added new command "Lines length".

New

Added "Equipment" category to the Hide/Show command.

Revit: Section annotation 1.9.5.0 (02.11.2022)

New

Added support for Organization Settings.

New

Added ability to expand a settings group to the full width of the window.

New

Added ability to pick elements or select by rectangle.

New

Added ability to process previously selected elements.

New

Added ability to edit configuration name and description.

New

Added ability to duplicate configuration.

New

Added ability to export and import configurations.

Improved

Added filters for element selection.

Added an explanation why move numbering is unavailable.

Revit: Tools 2.16.7.0 (28.10.2022)

New

Added "Point Clouds" category to the Hide/Show command.

Added a check for using a parameter in the Project Information.

Revit: Parametrization 1.6.21.0 (19.10.2022)

Improved

Defining conditions that reconcile numerical values, followed by reading the numerical values of the parameters in the IF, AND, OR functions.

Revit: Numbering 5.1.3.0 (14.10.2022)

Improved

Taking into account cases where the target parameter is displayed several times in the schedule, which leads to double numbering.

Revit: Dimensions by line 2.5.5.0 (13.10.2022)

New

Added the ability to disable object snapping when specifying points.

New

Added processing of the "Roofs" category.

Added ability to duplicate fields in formula editor.

Improved

Added removal of spaces at conditional expression arguments.

Revit: Parametrization 1.6.15.0 (10.10.2022)

New

Added possibility to change the "Type" parameter value.

Improved

Added an option to move fields in the formula editor.

Added handling of two quotation marks ("") indicating empty value.

Revit: Parametrization 1.5.8.0 (09.10.2022) Read more

Added ability to set multiple values to search and replace in view name and schedule name.

Revit: Sheet copy 2.22.1.0 (02.10.2022)

New

Added ability to set multiple values for search and replace in sheet number, view name and schedule name.

Revit: Numbering 5.0.0.0 (01.10.2022) Read more

New

Added the ability to process elements that are in the Structural Connections, when numbering in the schedules.

New

Added possibility to set the prefix and suffix by element parameter.

New

Added possibility to specify a numbering step.

New

Added possibility to use fractional values for numbering.

Improved

Using a category and/or parameter filter for numbering on a view.

Improved

Redesigned plugin windows.

Improved

Added ability to stretch the settings window when numbering in the view.

Improved

Saving plugin settings in a separate file.

Improved

Removed Revit 2017 support.

Revit: Parametrization 1.1.2.0 (29.09.2022)

Fix

Replacing the comma with a point when obtaining numeric parameter values.

Renga: Batch Sheets Export 1.2.2.0 (29.09.2022)

New

Added export to PDF and OpenXPS.

New

Added sheet search in the list.

Added a new "Manage" item to the Switchable Menu options for Revit.

Improved

Renamed the "ASM" switchable menu item to "Disciplines". Renamed "General" switchable menu item to "Design".

Working libraries for Revit 12.1.1.0 (18.09.2022)

Improved

Resetting selections in the parameter list in the parameter selection control.

Auto Updates Module 22.5.0.0 (18.09.2022)

New

Added icons of supported products in the new plugins installation window.

New

In the new plugins installation window added possibility to check "Do not remind anymore" for all plugins.

New

Added search in "Components" window.

Improved

Added sorting plugins by name in "Components" window.

Improved

Plugins with the same version but different product version are displayed in one line in "Components" window.

AutoCAD: Templates. Stage P 1.3.0.0 (16.09.2022)

New

Updated document templates to reflect changes made by Russian Government Decree № 963 from 27.05.2022.

Revit: Beams reinforcement 1.16.3.0 (16.09.2022)

Fix

Fixed "Method not found" error.

Revit: Dim offset 4.2.5.0 (14.09.2022)

New

Added a text width factor to take into account when calculating the width of dimensional text and determining whether text offsets are necessary.

Revit: Elements join 1.7.3.0 (14.09.2022)

New

Added "Slab Edges" category to the category list on the "Join" tab.

New

Added " Slab Edges " and "Structural Foundations" categories to the category list in the "Cut" tab.

Revit: Floor by Room 1.2.1.0 (13.09.2022)

New

Added possibility to lead the floor contour into the door openings by the whole width of the wall, or by a specified value.

Improved

Improved algorithms for the analysis and processing of openings.

Revit: Floor by Room 1.1.3.0 (09.09.2022)

Fix

Fixed an error that the list of Floor type was not filled in when restarting.

Revit: Batch Rename 1.3.0.0 (08.09.2022)

New

Added safe command calls that exclude closed Revit commands in case of unexpected errors.

Improved

Changed methods for reading numeric parameters in versions 2017-2020.

Revit: Floor by Room 1.1.2.0 (08.09.2022)

New

Added possibility to process selected and preselected Rooms.

Improved

The plugin work is not interrupted now when an error occurs while processing a Room boundary.

New

Added "Presentation" command.

Improved

Added copying the values of all string parameters from the original set to the newly created ones in the "Explode set" and "Split set" commands.

New

Added copying of graphics/visibility override settings in case the same filter is copied between different views.

Improved

Displaying view names along with their type.

Improved

Added remembering the value of "Views/View Templates" option.

Improved

Added a quick search for the current view in the list of target views.

Improved

Removed item tree virtualization.

Optimized parameter lists when there are a large number of parameters.

Improved

Added missing sorting in some lists.

Revit: Import from Excel 1.5.4.0 (10.08.2022)

Improved

Displaying cell read errors after the whole Excel worksheet has been processed.

Revit: Import from Excel 1.5.3.0 (09.08.2022)

Fix

Fixed an error that occurs in some cases when reading cells with formulas.

Revit: Copy values 1.9.10.0 (09.08.2022)

Fix

Fixed a bug that occurs when processing a compound arithmetic rule if a comma is used as a delimiter of integer and fractional parts when displaying parameter values in Revit.

Revit: Wall layouts 1.5.6.0 (09.08.2022)

New

Added an option to specify an offset at the top and an offset at the bottom.

Improved

Improved algorithm for determining cell width.

Fix

Fixed an error reading the contents of some cells.

Revit: View copy 1.0.4.0 (04.08.2022)

Fix

Fixed an error that incorrectly changed the availability property for some checkboxes in the plugin window.

Revit: Sheet copy 2.21.1.0 (04.08.2022)

Fix

Fixed an error that incorrectly changed the availability property for some checkboxes in the plugin window.

Revit: Elements join 1.7.2.0 (02.08.2022)

New

Added "Walls", " Floors" categories to the list of categories in the "Cut" tab.

Revit: Elements join 1.7.1.0 (01.08.2022)

Added ability to create an offset from the wall.

New

Added ability to process surrounding structures that are in a linked file.

New

Added ability to process rooms from a linked file.

New

Added the ability to add a prefix/suffix to the names of created views.

Fix

Fixed some bugs.

Revit: Side of the world 1.2.0.0 (23.07.2022)

Improved

Treatment of openings in walls that do not directly surround the room.

Revit: Copy values 1.9.9.0 (23.07.2022)

New

Added a prefix to the source parameters in the composite copy rule.

Improved

Increased maximal value of parameters in complex copy rules from 10 to 20.

Improved

Use of parameter names in the preview line of a composite copy rule.

Revit: Tools 2.14.1.0 (22.07.2022)

Improved

Copying pipe insulation with the copy element properties command.

Revit: Import from Excel 1.5.0.0 (21.07.2022)

New

Replacement of the main library for reading Excel files.

New

Using the "Elements filter" tool to filter elements.

New

Added "Only parallel walls " option to the "Join" tab.

New

Added OST_StructConnections category.

Renga: View orientation 1.0.0.0 (14.07.2022) Read more

Release

Release.

Revit: Walls reinforcement 5.19.47.0 (14.07.2022)

Fix

Fixed saving of wall reinforcement settings.

Auto Updates Module 21.8.0.0 (14.07.2022)

Fix

Fixed ModPlus re-registration bug for all Revit versions.

Revit: Sheet copy 2.21.0.0 (12.07.2022)

New

Copying parameter values with preserving the link with global parameters.

Improved

Displaying view templates in alphabetical order.

Improved

Saving prefix values, suffix values, search and replacement values, and the selected view template.

Revit: View copy 1.0.3.0 (12.07.2022)

Fix

Fix some bugs.

Revit: View copy 1.0.2.0 (11.07.2022)

Improved

Displaying view templates in alphabetical order.

Improved

Saving prefix values, suffix values, search and replacement values, and the selected view template.

Revit: Worksets 2.1.1.0 (10.07.2022)

New

Added "Collapse All", " Expand All", "Check All" and "Uncheck All" commands.

AutoCAD: Tables 1.8.2.0 (01.07.2022)

Improved

Improved some table styles.

Revit: Walls reinforcement 5.19.46.0 (01.07.2022) Read more

New

Removed restriction on working on plans only.

New

Added level grouping of walls and intersections.

New

Added an option to create joints from the underlying slab by additional vertical rods of the background reinforcement.

New

Added ability to create bent (bottle-shaped) vertical wall joints.

New

Added ability to create vertical wall joints with additional U-shaped rods.

New

Added ability to alternate sides when creating straight outlets of different lengths.

New

Added ability to create additional L-rods bent into the slab when creating straight joints in the outermost walls.

Improved

Removed restriction on the step of vertical bars of background reinforcement depending on the wall thickness in the group.

Improved

Redesign of the vertical joints settings - displaying only those properties that apply to the selected joints type.

Improved

Added the "do not create joints" option to the "If there is no slab, then" property in the vertical wall joints settings.

Improved

The minimum allowable distance between background reinforcement bars has been reduced to 10 mm. The message about the minimum tolerance of 50 mm for vertical bars and 25 mm for horizontal bars is displayed when the tolerance is violated.

Improved

Added the possibility to create U-shaped rods and stirrups at the same time in the framing of holes.

Improved

Creation of U-shaped rods and stirrups in the framing of holes with the layout in the same direction on opposite sides of the opening.

Fix

Fixed an error of rebar type copying when copying reinforcement settings between groups.

Fix

Fixed an error in assigning values to system reinforcement parameters.

Fix

Fix

Fixed an error setting the prefix from a parameter in Revit versions older than 2023.

Revit: Apartment Typology 1.6.7.0 (21.06.2022)

Improved

Changed strategy for rounding numbers that are halfway between the other two.

Revit: Coloring elements 2.5.4.0 (21.06.2022)

Improved

Added checks of the current view for the possibility to create or change the template.

Improved

Displayed information about parameters that cannot be used to create filters.

Fix

Fixed some bugs.

Revit: Worksets 2.0.1.0 (21.06.2022)

Fix

Fixed some errors when reading an organization configuration file.

Auto Updates Module 21.5.0.0 (21.06.2022)

Fix

Fix some bugs.

Revit: Copy values 1.9.7.0 (20.06.2022)

Fix

Fixed an issue where the header of the "Add parameter" button could not be displayed.

Revit: Worksets 2.0.0.0 (19.06.2022) Read more

New

Added "Workset Processing" command.

Revit: Slabs reinforcement 2.16.5.0 (09.06.2022) Read more

New

Added ability to create tied stirrups in the framing of holes.

Fix

Fixed an error of rebar type copying when copying reinforcement settings between groups.

Fix

Fixed an error of value allocation to system parameters of a reinforcement.

Fix

Creation of area-based reinforcement with arc segments in a contour is fixed.

Working libraries for Revit 11.8.8.0 (08.06.2022)

Fix

Fixed an error that did not apply corrections to rebar bend diameters.

AutoCAD: Smart 1.17.14.0 (07.06.2022)

Added the ability to replace with an empty value.

Fix

Fixed an issue with reading text parameter values in Revit versions older than 2023.

Fix

Fixed an issue with creating filters based on parameters with non-specified values.

Working libraries for Revit 11.8.3.0 (01.06.2022)

Fix

In the auxiliary method of dimensional processing, an error that occurs when processing dimensions created by the end points of pipes or ducts has been fixed.

Renga: Quick properties 1.3.1.0 (30.05.2022)

Duplicate styles with name change when matching.

Auto Updates Module 21.2.6.0 (20.05.2022)

Improved

Minor code improvements.

Revit: Apartment Typology 1.6.6.0 (19.05.2022)

New

Added possibility to set options of parameters pre-clearing.

New

Added possibility to set the filling order for "Room index" parameter.

New

Added possibility to set filling rules for "Apartment tag" parameter.

Revit: Worksets 1.9.4.0 (19.05.2022)

Improved

Change the focus on the work set name input field when adding a work set to a group.

Fixed the error of filtering elements if the filter has no conditions.

Renga: Search by condition 1.3.3.0 (15.05.2022)

Fixed an error when not all reinforcement was processed in the Area Reinforcement with sections of different lengths.

Revit: Copy values 1.9.5.0 (11.05.2022)

Improved

Processing of nested families of all levels.

Revit: Copy values 1.9.4.0 (11.05.2022) Read more

New

Added option to copy from parent family to nested families.

New

Added composite arithmetic copying rule.

New

Added option to remove initial parameter name patterns from composite rules.

New

Added preview of results in composite rules.

New

Added an option to select an element from a linked file as a source element for the variant of copying from one element to several elements.

Improved

Redesigned composite rules with an option of specifying any delimiter.

Improved

Removed the "Over windows" property.

Improved

Using the displayed value of numerical parameters at direct copying.

Fix

Fixed an issue where icons were not displayed on the parameter search option button by name.

Revit: Side of the world 1.1.2.0 (09.05.2022)

Improved

Consideration of the base point rotation.

Fix

Fixed a bug with access to the input field of the room parameter when there are no saved settings.

New

Added " Update worksets" command.

Improved

Added an option to disable the id of elements that are assigned to a workset.

Improved

The types of links were added to the elements to be processed.

Revit: Worksets 1.8.0.0 (05.05.2022)

Fix

Fixed fatal error when trying to edit filters by category or parameters.

Working libraries for Revit 11.2.0.0 (05.05.2022)

New

Added saving of the last opened switched menu.

Added "Select All" and " Unselect All" buttons.

Edits were made to the construction of the conditional line of intersection.

Improved

Added processing of extreme lines in families, if no extreme edges are found.

AutoCAD: Title blocks 2.3.2.0 (28.04.2022)

Fix

Fixed "eKeyNotFound" error that could occur when inserting signatures.

Working libraries for AutoCAD 10.0.1.0 (27.04.2022)

Fix

Fixed the inclusion of the product identification icon.

Working libraries for AutoCAD 10.0.0.0 (27.04.2022)

New

New auxiliary methods used in plugin development have been added.

Revit: Beams reinforcement 1.15.0.0 (25.04.2022) Read more

New

Possibility to export, import and copy settings of reinforcement with data about the number and position of longitudinal reinforcement and with the layout scheme of the transverse reinforcement was added.

New

Possibility to set straight, C-shaped and S-shaped shapes of transverse reinforcement along the outermost bars of the longitudinal reinforcement has been added.

Improved

The ability to specify a fractional value for the thickness of the working reinforcement cover has been added.

Fix

A bug was fixed in the search for related elements from linked files in the case when a link instance has different insertion coordinates than the original one.

Fix

Fixed an issue where rebar bending radii could not be corrected in some cases.

Fix

Fixed an error that occurred when copying rebar type between rebar groups.

Revit: Columns reinforcement 3.19.0.0 (25.04.2022) Read more

New

Added an ability to place couplers when creating straight joints of longitudinal reinforcement in columns with the same cross-section.

New

Added ability to bend straight bars of longitudinal reinforcement "in a bottle" at the bottom if there are straight joints from the underlying column.

New

Possibility to set straight, C-shaped and S-shaped shapes of transverse reinforcement along the outermost bars of the longitudinal reinforcement has been added.

Improved

The ability to specify a fractional value for the thickness of the working reinforcement cover has been added.

Fix

A bug was fixed in the search for related elements from linked files in the case when a link instance has different insertion coordinates than the original one.

Fix

Fixed an issue where rebar bending radii could not be corrected in some cases.

Fix

Fixed an error creating L-shaped joints from circular columns.

Fix

Fixed an error that occurred when copying rebar type between rebar groups.

Fix

Fixed errors that occurred when creating spiral reinforcements for circular columns.

Working libraries for Revit 10.2.0.0 (23.04.2022)

New

Added possibility to specify what types of documents - projects and/or families - should be processed in the autosave service.

Revit: Dim offset 4.1.2.0 (23.04.2022)

Improved

Improved algorithm for determining the length of dimensional text.

Improved

Added accounting for dimensional text override.

Revit: Elements join 1.3.9.0 (22.04.2022)

New

The "Data Devices" category has been added to the list of categories on the "Cut" tab.

Revit: Split rebar 1.2.2.0 (22.04.2022)

New

Added progress dialog with cancellation option.

Improved

Added warning ignoring.

New

Added an option to open the folder with the result.

Revit: Layer breaking 1.1.10.0 (01.04.2022)

Fix

Fixed some bugs that occur when breaking walls by core boundary in Revit versions older than 2022.

Revit: Numbering 4.4.5.0 (01.04.2022)

New

Numbering of selected rows is made through a checkbox.

Fix

Added ignoring of materials, which led to the skipping of items during the numbering in the schedule (in the case, when the material fields are added).

Added ability to disable progress dialog.

New

Added basic cleaning configurations.

New

Added basic cleanup "Remove all Sheets (except open) with Views on them".

New

Added basic cleanup "Ungroup all groups (without deleting)".

Revit: Search and replace 1.2.0.0 (25.03.2022)

New

Added "Viewport title" search scope.

AutoCAD: Smart 1.17.11.0 (25.03.2022)

Improved

Edits have been made to search for level marks by the displayed value.

Working libraries for Revit 9.3.2.0 (25.03.2022)

Fix

Fixed a bug in the tab visibility management service that caused standard project tabs to be displayed when starting Revit by opening a family file.

Auto Updates Module 19.3.0.0 (24.03.2022)

Improved

Service update.

Revit: View copy 1.0.0.0 (22.03.2022) Read more

Release

Release.

Revit: Apartment Typology 1.6.0.0 (20.03.2022) Read more

Added multileader processing by the "Text content" property.

Revit: Split rebar 1.0.0.0 (01.03.2022) Read more

Release

Release.

Revit: Slabs reinforcement 2.14.20.0 (28.02.2022)

New

New algorithm for finding floor contours.

Fix

Added removing of unused groups.

New

Added information about availability of shared parameters in current SPF.

New

Added option to display unused common parameters in the notepad.

Improved

Fewer items in the main cleanup when running in a family.

Revit: Columns reinforcement 3.14.27.0 (16.02.2022)

New

Rectangular stirrups modeling considering bends on the edge of the working rebar.

Improved

In the settings window added the display of working rebar binding to the center.

Revit: Dim offset 4.1.0.0 (16.02.2022)

Improved

Correct offset of the rightmost segment.

Revit: Apartment Typology 1.3.5.0 (14.02.2022) Read more

New

Added possibility to create several named sources.

Improved

Improved rounding algorithms when calculating areas.

Working libraries for Revit 9.2.0.0 (14.02.2022)

Improved

Autosave service: move the "_backup" folders for linked files that are not located in the folder of the current project.

Revit: MEP clash solver 2.0.2.0 (12.02.2022)

Fix

Corrected the bug with bypassing elements on the left and right sides.

Revit: Beams reinforcement 1.11.24.0 (11.02.2022)

Improved

Consideration of end walls and columns that are in contact with the beam and not under it.

Improved

Consideration of the transverse walls and columns that divide the beam and are not under it.

Fix

Fixed a bug that made it impossible to specify a new numbering start value when deleting the old one.

Revit: Numbering 4.2.2.0 (06.02.2022)

New

Added possibility to number selected rows in the schedule.

Improved

Added construction of auxiliary detail lines during order selection (only on plans).

Improved

Changed the order of window elements when numbering in views.

Working libraries for Revit 9.0.0.0 (05.02.2022) Read more

New

Added service for managing the visibility of tabs on the ribbon.

Improved

Tab coloring service: added possibility to set text color.

Improved

Autosave service: added possibility to move backup files without enabling autosave.

Improved

Autosave service: added move of backup folders when working together.

Fix

Fixed an issue where switched menus didn't work when changing the localization language.

Revit: Cropping view 2.0.2.0 (04.02.2022)

Fix

Fixed "Cropping view" command startup error.

Revit: Cropping view 2.0.1.0 (04.02.2022)

New

Added creation of a backup file of user notes.

Improved

Correct window behavior (does not hide behind the AutoCAD window).

Fix

Fixed a bug that prevented the "Add to existing text" item from working when double-clicking.

Revit: Sheet copy 2.20.1.0 (02.02.2022)

Fix

Do not copy the "Type" parameter value for the title block, if a specific title block is specified and "Copy values of title block parameters" is checked.

Revit: Fill patterns 1.5.8.0 (02.02.2022)

Fix

Removing unnecessary commas at the end of a line in the text patternt representation.

Revit: Copy elements 1.12.14.0 (01.02.2022)

Improved

Search optimization.

Fix

Fixed an error creating straight joints from the underlying slab.

Fixed a bug in determining the order of layers for some walls in Revit versions below 2022.

Fix

Transfer settings in the registry to the Software folder.

New

New algorithms for local file processing (less data in the registry).

Revit: Layer breaking 1.1.3.0 (21.01.2022)

Fix

Fixed an error in processing non-attached walls.

Revit: Layer breaking 1.1.2.0 (21.01.2022)

New

Added copying properties of "Top offset " and "Base offset " parameters for walls.

Fix

Fixed an error in copying of inserts parameters.

Fix

Fixed an error that did not delete auxiliary types.

Revit: Layer breaking 1.0.0.0 (20.01.2022) Read more

Release

Release.

Revit: Beams reinforcement 1.10.20.0 (19.01.2022)

Improved

Optimized (accelerated) search for related elements.

New

Added options for deleting previously created reinforcement: delete previously created reinforcement of the same type as the one being created; delete all previously created reinforcement; do not delete previously created reinforcement.

New

Added the ability to create joints not only from the foundation slab, but also from the underlying floor (provided that there is no column below).

New

Consideration of floor and beams from related files when searching for relationships between columns.

Improved

The minimum cross rebars step has been reduced from 100 mm to 25 mm.

Fix

Fixed a rounding error when displaying the diameter of circle columns in the preview.

Fix

Corrected an error that caused the percentage of reinforcement to not be calculated when changing the number of bars.

Fix

Fixed display of spiral shape parameter names in the preferred shapes window.

Revit: Slabs reinforcement 2.13.18.0 (15.01.2022)

New

A section has been added to the settings that allows you to specify the conditions under which holes of certain sizes will not be selected by default.

Fixed a bug where straight rods bent into a bottle could not be created if the preferred shape is not set.

2021 Year

Revit: MEP clash solver 2.0.0.0 (29.12.2021) Read more

New

Redesign, enhancements, and pattern work.

Revit: Apartment Typology 1.2.3.0 (26.12.2021)

New

Added parameter "AP_Total area without factor" which receives the sum of all apartment room areas without taking into account unheated rooms and without taking into account the reduction factor.

New

Added possibility to fill in the room matrix (tab "Sources") with names of rooms of the current project.

Improved

Addition of the room separators transformations located in linked files.

Fix

Ignored "The target instance does not exist in the given phase" error when accessing FromRoom/ToRoom properties of opening families.

New

Added an option to specify the thickening of horizontal reinforcement.

New

An option was added not to specify the indent of the first and last bar of the background horizontal reinforcement.

New

Additional vertical bars in ends and near intersections are now created based on the background reinforcement vertical bar joints settings.

New

Added ability to specify hooks for all rectangular stirrups in the preferred shapes window.

Improved

Correct display of plugin windows (on top of the Revit window, but not on top of other application windows).

Improved

Removed the "Over windows" option from the plugin settings.

Improved

The maximum value of the binding of bending vertical bars to the top and bottom of the slab has been increased from 100 to 200 mm.

Improved

Added trimming of L-shaped joints from walls into the upper slab if a rod protrudes beyond the boundary of the slab body.

Fix

Fixed a localization error in the parameter assignment dialog box.

Fix

New

Removed the window with options for selecting columns (replaced by the dropdown list from the "Select" button).

Improved

Do not process marked positions if old and new values are the same.

Improved

Correct processing of numeric parameters.

Improved

Processing parameters specified by a formula.

Revit: Slabs reinforcement 2.11.14.0 (29.11.2021)

Improved

Added a tolerance when checking the length of created U-shaped rods in the end framing .

Revit: Sheet copy 2.19.2.0 (29.11.2021)

New

Added search and replace in schedule name.

Improved

Added replacement of "{" and "}" with "(" and ")" in view names when duplicating.

Improved

Removed collapsing and expanding the sheet tree when pressing the "-" and "+" buttons on the numpad.

AutoCAD: Smart 1.17.7.0 (29.11.2021)

New

Added "Length" property for all linear objects.

Improved

Changed the property order of the "Letter Line" object.

AutoCAD: Smart 1.16.6.0 (28.11.2021) Read more

New

Added new smart object: Letter Line.

Revit: Elements join 1.2.8.0 (27.11.2021)

New

Added an option to cancel a cut.

Improved

Added the ability to connect elements by height.

Revit: Batch Rename 1.2.4.0 (25.11.2021)

Added ability to turn on/off processing of linked files.

Revit: Elements join 1.1.4.0 (24.11.2021)

New

Added feature to cut elements.

Improved

Added saving of the selected tab.

Improved

Categories are made unselectable by default.

Fix some bugs.

Revit: Slabs reinforcement 2.11.11.0 (19.11.2021)

Fix

Fixed some bugs.

Revit: Rebar solid and visible 3.3.2.0 (17.11.2021)

New

Added processing of fabric reinforcement (Revit 2021 and higher).

Revit: Beams reinforcement 1.9.15.0 (16.11.2021)

New

Removed the window with options for selecting slabs (replaced by the dropdown list from the "Select" button).

Improved

Ignoring an error if it is not possible to determine the necessity of bending longitudinal rebars.

Fix

Fixed localization in the parameters editing dialog.

Revit: Slabs reinforcement 2.11.10.0 (16.11.2021)

Fix

Corrected a typo in the title "Reinforcing ends in transverse direction".

Auto Updates Module 15.0.0.0 (16.11.2021) Read more

New

Added a service for viewing information about components.

Configurator 12.2.0.0 (15.11.2021)

Improved

Service update.

Revit: Slabs reinforcement 2.11.9.0 (14.11.2021) Read more

New

Added possibility to reinforce sloping slabs.

New

Added an option to set the orientation of the bottom mesh - either co-oriented or mirrored.

New

Added possibility to create an additional filler bar along the edge of the slab (only along the outer edges).

New

Removed the window with options for selecting slabs (replaced by the dropdown list from the "Select" button).

New

Added ability to not create U-shaped rods in the ends of the slab, if the length of the part during generation is less than the specified in the settings.

New

Added an option to specify the type of created instances of "Reinforcement by area".

New

Added an option to create a background reinforcement using instances of an "Area reinforcement" for each mesh.

New

Added the ability to translate the values of string parameters of created instances of Area Reinforcement into reinforcement bars.

New

Added an option to configure U-shaped bars in the ends separately for longitudinal and transverse directions.

Improved

Added ability to perform framing of holes up to 300 mm.

Improved

Correct display of plugin windows (on top of the Revit window, but not on top of other application windows).

Improved

Removed "Over Windows" option from the plugin settings.

Improved

Made some improvements to the contour acquisition algorithms to create reinforcement along the area in different directions.

Improved

Parameters for straight bars of hole framing have been separated - for the upper and for the lower mesh.

Revit: Import from Excel 1.4.18.0 (12.11.2021)

Improved

Correct display of plugin windows (on top of the Revit window, but not on top of other application windows).

Fix

Ignoring an error when failing to read the color of existing colors in the project.

Working libraries for Revit 7.8.5.0 (11.11.2021)

Added ability to use beam geometry without considering connections.

New

Added the ability to set hooks to all shapes with hooks in the preferred shapes window for rebars. It is possible to specify hooks without specifying shapes.

New

Added an option to specify a concrete cover for working reinforcement at the top, bottom, sides and ends.

New

Added possibility to set the distance between the centers of the bars of the working rebar.

Improved

Correct display of plugin windows (on top of the Revit window, but not on top of other application windows).

Improved

The value of the minimum distance between bars has been reduced from 50 to 25 mm.

Improved

Added filtering of the families selected for processing by the "Material for Model Behavior " property ("Concrete" and "Precast Concrete" values are allowed).

Improved

Validation of rebar diameter and message about insufficient diameter removed.

Improved

Ignoring incorrect geometry errors when searching for links has been added.

Fix

Fixed errors of updating of graphics in the plugin window when changing the distance between the bars of the working rebars.

Fix

Fixed an issue where wrong length was taken for straight bars in beams with cross-section height greater than width.

Fix

Fixed an error in coordinate calculations when generating a triangular stirrup.

Revit: Columns reinforcement 3.7.9.0 (07.11.2021) Read more

New

Added the ability to use column geometry without considering connections.

New

Added the ability to set hooks to all shapes with hooks in the preferred shapes window for rebars. It is possible to specify hooks without specifying shapes.

New

Added possibility to set the distance between the centers of the bars of the working rebar.

Improved

Correct display of the plugin windows (on top of the Revit window, but not on top of other application windows).

Improved

The value of the minimum distance between bars has been reduced from 50 to 25 mm.

Improved

Added filtering of the families selected for processing by the "Material for Model Behavior " property ("Concrete" and "Precast Concrete" values are allowed).

Improved

Added ignoring of errors related to incorrect geometry when searching for relations.

Fix

Fixed errors of updating of graphics in the plugin window when changing the distance between the bars of the working rebars.

Working libraries for Revit 7.8.3.0 (07.11.2021)

Improved

Service update.

Working libraries for Revit 7.8.2.0 (06.11.2021)

Improved

Service update.

Revit: Numbering 4.0.0.0 (05.11.2021) Read more

New

In schedules with unchecked "Itemized" option added ability to select an algorithm for determining positions.

Improved

Added processing of Grids when determining the position of elements in the view.

Working libraries for Revit 7.8.1.0 (04.11.2021)

Improved

Service update.

Working libraries for Revit 7.8.0.0 (03.11.2021)

Improved

Added auxiliary methods necessary for future plugin with reinforcement updates.

Renga: Last hidden 1.0.0.0 (29.10.2021) Read more

Release

Release.

Renga: Levels 1.0.2.0 (29.10.2021)

Improved

Sorting levels by elevation.

Improved

Correct linking of the plugin window to the Renga window (displaying on top of the Renga window, but not on top of other application windows).

Working libraries for Renga 5.3.0.0 (29.10.2021)

New

Added auxiliary methods to display plugin windows with correct linkage to the Renga window.

Revit: Numbering 3.2.11.0 (29.10.2021)

Improved

Added ability to process levels in Schedules.

Working libraries for Revit 7.7.0.0 (28.10.2021) Read more

New

Added possibility to color tabs by type of view in the tabs coloring service.

New

An option of specifying a larger value (up to 26) of thickness for the left border coloring has been added to the tabs coloring service.

New

Added saving .os$ to the autosave service when saving manually, as well as restoring from an .os$ file if the saving is canceled.

Revit: Copy elements 1.12.9.0 (25.10.2021)

New

Added filter copying.

New

Added a check for the presence of copied family types in the target document.

New

Added ability to select linked files by source document.

Improved

Extended the list of filtering categories.

Improved

Read-only parameters are excluded from the selected items when filling the list of parameters.

Data bases 2.6.4.0 (12.10.2021)

Added the ability to add a layout name to the title block when inserting into a layout.

New

Added ability to set a layer for signatures.

Improved

Set the horizontal cell indent to 0.5 on insertion.

Improved

Added the regeneration of the drawing when closing the "Fields" window.

Fix

Reset date when setting default values for fields.

Revit: Dimensions on plan 2.0.4.0 (18.09.2021)

Fix

Fix some bugs.

Revit: Sheet numerator 2.3.0.0 (13.09.2021) Read more

New

Added possibility to set leading zeros for the sheet number.

Working libraries for Revit 7.6.0.0 (13.09.2021)

Improved

Added new public methods used in plugins.

AutoCAD: Totals 3.0.0.0 (11.09.2021) Read more

New

Added ability to write back sheet number and name, specification name.

New

New

In the "View Filters" section, added collection and displaying of filters not used in views or templates.

Revit: Model cleaning 2.4.0.0 (21.08.2021)

New

Added an option to delete project shared parameters (without checking their usage).

Improved

Removed mandatory re-search after deleting unused shared parameters.

Fix

Fixed an error which caused non-drawn elements in tables to be selected.

Configurator 11.8.5.0 (20.08.2021) Read more

New

Added browser authorization.

Revit: Utilities for working with rebar 1.0.2.0 (19.08.2021)

Improved

Добавлены маленькие иконки команд.

Working libraries for Revit 7.4.4.0 (16.08.2021) Read more

Improved

Removing the backup functionality.

Working libraries for Revit 7.4.3.0 (15.08.2021)

Improved

Autosave file and temporary file are now saved in the specified folder.

New

Added ability to create dimensions for crossed rebar.

Improved

Filtering in the type list for dimensions only suitable for linear dimensions types.

Fix

Ignoring the "Can't set/get leader position..." error in the method of removing spot elevation duplicates.

Auto Updates Module 14.0.1.0 (23.07.2021)

Fix

Fix some bugs.

AutoCAD: Dwg base 1.5.9.0 (22.07.2021)

Improved

Adaptivity of window components was improved.

Added parameter filter in the tree by parameter name.

Improved

If the parameter is not set, the value of the parameter is displayed as "[Not set]".

Improved

If the current view is a schedule, the filter will not open.

Fix

Fixed an issue with adding an offset from the bottom of the slab when modeling L-shaped joints from the foundation slab to the overlap length.

New

Added a separate button on the ribbon that calls the command to restore the text position at the selected dimensions.

New

Added an option to view error details when clicking on the notification.

Revit: Utilities for working with rebar 1.0.1.0 (29.06.2021)

Fix

Fix some bugs.

Revit: Utilities for working with rebar 1.0.0.0 (28.06.2021) Read more

Release

Release.

AutoCAD: Smart 1.15.2.0 (26.06.2021) Read more

New

Added new smart object: View/Section label.

Improved

A leader with text was added to the "Fragment mark" smart object.

Working libraries for Revit 7.3.1.0 (24.06.2021)

Fix

Fix some bugs.

Working libraries for Revit 7.3.0.0 (24.06.2021)

New

Added auxiliary methods necessary for reinforcement plugins.

Revit: Walls reinforcement 5.4.4.0 (21.06.2021)

Fix

Fixed an error when L-shaped intersections were not found.

Revit: Spot dimensions 1.2.0.0 (21.06.2021)

New

Added command to create spot dimensions by elements from linked files.

New

Added processing of beams, openings and curtain walls.

Revit: Beams reinforcement 1.4.0.0 (20.06.2021)

Improved

Improved algorithm for filling lists of preferred forms of reinforcement bars.

Improved

Prohibit startup in families.

Improved

Removed functionality for editing reinforcement of individual beams in a group.

Revit: Columns reinforcement 3.4.0.0 (20.06.2021) Read more

New

Added possibility to specify the shape for longitudinally bent reinforcing bars.

Improved

Improved algorithm for filling lists of preferred forms of reinforcement bars.

Improved

Prohibit startup in families.

Improved

Removed functionality for editing reinforcement of individual columns in a group.

Revit: Slabs reinforcement 2.2.0.0 (20.06.2021)

Improved

Improved algorithm for filling lists of preferred forms of reinforcement bars.

Improved

Prohibit startup in families.

Revit: Walls reinforcement 5.4.3.0 (20.06.2021) Read more

New

Added possibility to specify the shape for longitudinally bent rebars.

Improved

Improved algorithm for filling lists of preferred forms of reinforcement bars.

Improved

Prohibit startup in families.

Improved

Ignoring the intersections of two walls when the angle of intersection is less than 45 (or more than 135) degrees.

Fix

Fixed a bug where vertical bars were created with uneven spacing around small holes, ignored when cutting rebar.

Fix

Corrected an error that caused incorrect binding of straight joints from the foundation slab to the bottom of the slab.

Revit: View filters 2.2.6.0 (18.06.2021)

Improved

Added no launch in families.

Fix

Fixed error «Filter is already applied to the view».

Working libraries for Revit 7.2.0.0 (17.06.2021)

Improved

Added auxiliary methods necessary for reinforcement plugins.

Working libraries for Revit 7.1.1.0 (16.06.2021)

Fix

Fixed an error launching the settings window in Revit version earlier than 2019.2.2.

Working libraries for Revit 7.1.0.0 (14.06.2021) Read more

New

Added advanced settings for the tab coloring service.

AutoCAD: Calculator 1.4.9.0 (13.06.2021)

Changed the grouping of materials from a grouping by property "material category" to a grouping by property "material class.

Configurator 11.8.2.0 (22.05.2021)

Improved

Increased number of retries to check access to the site and web services.

New

Added copying of viewports with header position saved. Only for Revit 2022 and higher!.

New

Added the ability to duplicate generic annotations.

New

Added the ability to offset the view depth of duplicate views.

Improved

Changed the plugin icon.

Improved

Optimized some algorithms.

Revit: Columns reinforcement 3.0.0.0 (29.04.2021) Read more

New

Using model bar diameters when calculating the location of generated reinforcement in Revit 2022.

Improved

Added the ability to specify end cover by a numeric field instead of a drop-down list, with the option to set the value to 0.

Fix

Fixed bug "Cannot convert object of type "System.String" to type "mprColumnsReinforcement.Models.Parameters.RebarParameters".

Revit: Slabs reinforcement 2.0.0.0 (29.04.2021) Read more

New

Using model bar diameters when calculating the location of generated reinforcement in Revit 2022.

New

Added the ability to re-select slabs that were processed using the plugin in the past.

Fix

Fixed the "No elements in sequence" bug that caused some slab reinforcement cases.

Revit: Walls reinforcement 5.0.0.0 (29.04.2021) Read more

New

Using model bar diameters when calculating the location of generated reinforcement in Revit 2022.

New

Deletion of previously created rebar is now limited to framed openings only (only for rebars created after the current update).

Improved

Unused rebar options are now hidden instead of being unavailable.

Improved

Added the ability to specify end cover by a numeric field instead of a drop-down list, with the option to set the value to 0.

Improved

Lower diagonal framing of openings is not created if the opening is formed by the Doors category family, regardless of reinforcement settings.

Improved

Added restriction on creating additional vertical bars near intersections only for walls intersected at right angles.

Fix

Fixed a bug that caused the reinforcement of openings from unchecked groups.

Fix

The "The spacing isn't bigger than 0.0" error that occurs when creating vertical bars of background reinforcement has been fixed.

Improved

Added an additional check for the presence of a stamp file when inserting a format.

Improved

Added the ability to disable the logo from a block or from a file to use fields.

In the quick selection of annotations, the display of an error when interrupting the selection of elements is removed.

AutoCAD: Dwg base 1.5.6.0 (03.04.2021)

Improved

Removed version checking of files added to the database.

AutoCAD: Auto layers 2.0.2.0 (02.04.2021)

Fix

Fix some bugs.

Revit: Columns reinforcement 2.0.3.0 (31.03.2021)

Fix

Fixed the error "This instance does not have a swept profile".

New

Added processing of detail lines.

Fix

Fixed a bug where the dimensions were not set on the extreme faces of families when the option to set the dimensions along the center line was disabled.

Revit: Columns reinforcement 2.0.0.0 (20.03.2021) Read more

New

Added the ability to re-select columns that were processed during the last use of the plugin.

New

For transverse reinforcement, added the ability to set an offset from the bottom face of the column.

New

Added consideration of reinforced concrete beams located between the column and the overlying floor when searching for relationships between columns.

New

Added the ability to create rectangular stirrups for transverse reinforcement at 45 degrees.

New

Added the ability to create joints from foundation slabs.

Improved

Only plain rebars are available in the transverse reinforcement bar type list.

Improved

Increased the vertical size of the dialog for editing the distances between longitudinal reinforcement bars.

Fix

Fixed incorrect localization in the window for selecting preferred reinforcing bar shapes.

Fix

Fixed a bug with setting the wrong value of the diameter when changing the type of reinforcing bar of transverse reinforcement.

Fix

Fixed a bug where extra elements appeared in the default reinforcement settings window after resetting the values.

Fix

Fixed error with saving reinforcement settings to xml file.

Fix

The "Apply" button is now available only if there are filters in the right zone with the "New" or "Remove" status.

Revit: Copy elements 1.9.5.0 (19.02.2021)

New

Added copying of the contents of copied drafting views.

Added new smart object: secant nodal leader.

New

Added the ability to add masking to hide the background for all objects with text.

New

Node Leader: added value editor by double click.

Improved

Nodal leader: for a round marker, the drawing order has been changed to account for passing through a point.

Improved

Nodal leader: Added a new property "Text Always Horizontal".

Improved

The palette of properties of intelligent objects has been renamed to "ESKD Properties".

Improved

Added sorting in alphabetical order in the style settings window.

Fix

Waterproofing: fixed the second line drawing error when zooming.

Fix

Straight axis: fixed a bug where the position of landmark markers did not change.

Revit: Dim offset 3.1.4.0 (15.02.2021)

Improved

A small icon has been added to the button on the ribbon to be able to add a button to the quick launch bar.

Revit: Walls reinforcement 4.32.14.0 (09.02.2021)

Fix

Fixed an error in the analysis of walls when the bottom of the wall is completely cut off by the opening.

Fix

Fixed a bug where the group for creating vertical stirrups in the frame of openings did not become available.

Fix

Fixed a bug where the shape of the reinforcing bar of the second part was applied at the intersections, which is not available.

Fix

Fixed a bug where additional vertical bars at the ends and near openings were created with a protrusion above the wall.

Revit: Walls reinforcement 4.32.10.0 (07.02.2021)

New

Added the ability to create cross clamps using Revit hooks.

New

Added the ability to re-select walls that were processed in the past using the plugin.

New

Added the ability to create each transverse clamp with a separate reinforcing bar.

New

Added the ability not to cut background reinforcement bars with openings to certain sizes.

New

Added merging of vertical bars of the frame of openings when overlapping.

New

Added the ability to set 3 bars in a row when creating straight bars for framing openings.

New

Added the ability to separately set U-shaped rods in the frame of the openings at the top and bottom.

New

Added the ability to create tied stirrups in the frame of the openings along the bottom and vertically.

New

Added the ability to set the layout of tied stirrups in the frame of openings along the length of the opening or along the length of straight bars.

New

Added the ability to create straight outlets of vertical bars of background reinforcement without taking into account the overlying elements.

New

Added the ability to create additional vertical bars near intersections.

Improved

Changes were made to the algorithm for finding openings, allowing you to process openings created by MagiCAD software.

Improved

Added an increase in the bend radius of transverse clamps (studs) in the places where additional reinforcement of ends and intersections is installed. Only for studs with hooks in sketch.

Improved

Added consideration of attached columns when creating horizontal bars of background reinforcement .

Improved

Added consideration of intersecting walls when creating horizontal bars of background reinforcement (cross intersections).

Improved

Added more correct consideration of adjacent openings when creating a frame of openings.

Improved

Added separate settings for all types of reinforcement in the frame of openings in the settings window for preferred reinforcing bar shapes.

Improved

Added the ability to disable the option when the outermost vertical bars of the background reinforcement are displaced when U-shaped bars hit the bend at the end of the wall.

Support for updated databases with an optimized codebase.

Data bases 2.6.0.0 (06.01.2021)

New

Optimizing the codebase.

Revit: Numbering 3.0.0.0 (06.01.2021)

New

Added options for selecting elements in the view: standard selection by frame, ordinal selection and selection by curve.

New

Added filtering of items by category when selecting items in a view.

New

Added collection of parameters from selected elements and displaying them in the list.

New

When working in a view, the plugin window does not block Revit.

Improved

Various fixes and improvements.

Configurator 11.4.0.0 (05.01.2021)

Fix

Added joining of frame rebars for openings when they intersect.

Improved

Improved algorithm for creating a contour for reinforcement.

Improved

Added the ability to enter offset and step of bars in the frame of openings, rather than select from the list.

Improved

Added sorting of holes in the list by frame availability.

Revit: Columns reinforcement 1.3.8.0 (05.12.2020)

New

Added the ability not to change the bend diameters for existing types of reinforcement.

Improved

Column analysis does not interrupt analysis in case of error.

Revit: Walls reinforcement 4.20.41.0 (05.12.2020)

New

Added the ability not to change the bend diameters for existing types of reinforcement.

Fixed some bugs.

Data bases 2.3.0.0 (26.11.2020)

Improved

Updating the codebase.

Revit: Copy values 1.0.0.0 (23.11.2020)

Release

Release.

Auto Updates Module 11.0.0.0 (22.11.2020)

Improved

Removed service for checking new licenses.

Auto Updates Module 10.0.0.0 (22.11.2020)

Improved

Changed address of web services.

Improved

Changed the time of checking news and the availability of new licenses.

Renga: Levels 1.0.0.0 (20.11.2020)

Release

Release.

Revit: Copy elements 1.8.4.0 (14.11.2020)

New

New

Added copying of text fields of original dimensions.

New

Added copying of the text position of the original dimensions.

Revit: Merge dimensions 1.4.3.0 (06.11.2020)

If the duplicated text is in a group, then the group itself will be duplicated.

AutoCAD: Smart 1.8.9.0 (21.10.2020)

Improved

Rebuilding a ribbon tab after editing customization settings.

Improved

Reopening the palette when changing the workspace (if the palette is not connected to the main ModPlus palette).

Working libraries for AutoCAD 5.1.6.0 (21.10.2020)

Improved

Rebuilding a ribbon tab after editing customization settings.

Improved

Reopening the palette when changing workspace.

Revit: Split dimensions 1.0.1.0 (20.10.2020)

Fix

Fixed name and description.

Revit: Split dimensions 1.0.0.0 (19.10.2020)

Release

New

Added selection of the document by which the bend diameter is adjusted for rebar types.

New

Added the ability to create separate upper and lower horizontal bars for the frame of openings.

New

Added the ability to create stirrups along the upper frame bars of openings.

New

Added the ability to create straight joints from foundation slabs.

Improved

Reduced plugin window opening time.

Improved

Changed the algorithm for cutting vertical reinforcement bars.

Improved

Removed reinforcement settings for groups of openings by sizes.

Improved

In the settings of wall reinforcement, additional vertical reinforcement bars at the ends are placed in a separate group.

Improved

Removed the creation of joints from the foundation slab by additional vertical bars at the ends of the walls.

Fix

Fixed a bug with incorrect indentation of U-shaped bars along the upper edge of the wall (the indent was taken as a cover layer from the ends of the horizontal reinforcement instead of the vertical one).

Fix

Fixed a bug with creating extra U-shaped bars along the top face of the wall when creating additional vertical bars at the ends of the wall.

Fix

Fixed a bug where the anchoring / overlap calculation window was hidden behind the main plugin window when the "Over Windows" setting was enabled.

Revit: Slabs reinforcement 1.17.4.0 (12.10.2020) Read more

New

Added selection of the document by which the bend diameter is adjusted for rebar types.

Fix

Fixed a bug where the anchoring / overlap calculation window was hidden behind the main plugin window when the "Over Windows" setting was enabled.

Revit: Columns reinforcement 1.2.4.0 (12.10.2020) Read more

New

Added selection of the document by which the bend diameter is adjusted for rebar types.

Added deletion of segments of zero length.

Auto Updates Module 8.7.2.0 (01.10.2020)

Fix

Fix some bugs.

Configurator 9.8.5.0 (01.10.2020)

Improved

Service update.

Auto Updates Module 8.7.1.0 (01.10.2020)

Fix

Fix some bugs.

Configurator 9.8.4.0 (30.09.2020)

Improved

Added display of the number of plugins currently visible in the list.

Improved

The "Install and Enable All" command is split into two commands.

Fix

Fix

Fixed a bug with inserting blocks with a UCS.

Working libraries for AutoCAD 5.1.1.0 (16.09.2020)

Improved

Added accounting for UCS when selecting a cell while inserting a value into a table (used by various plugins).

AutoCAD: Dwg base 1.5.1.0 (15.09.2020)

New

Added the ability to specify the storage folder for the user base of blocks.

Fix

Fixed error checking the file for storing the block for valid version 2010 instead of 2013.

Revit: CAD manager 1.3.6.0 (15.09.2020)

New

Updated built-in function for calculating anchoring length.

Improved

Fixed sizes of created U-shaped bars in the frame of openings.

New

Added the ability to create copies of legends.

New

Added the ability to offset the view range for duplicated floor plans.

Improved

Redesigned the position and name of some settings in the plugin window. Added explanatory tooltips.

Auto Updates Module 8.5.3.0 (02.09.2020)

Improved

Removed the display of messages about the presence or installation of updates for products that are not on the user's computer.

Revit: Fill patterns 1.5.5.0 (01.09.2020)

New

Added the ability to export/import geometry in a graphical editor.

New

Added the ability to create a new pattern by duplicating the selected.

New

Added the ability to delete multiple patterns checked in a special dialog.

Revit: Numbering 2.7.2.0 (31.08.2020)

Improved

Removed the "Clear" button when working in schedules.

AutoCAD: Smart 1.8.7.0 (30.08.2020)

New

Added a new command "Search by value", which allows you to search for smart entities by the value of numeric or string properties.

Improved

For the smart entity "Level mark" added property "Separator of integer and fractional parts".

Improved

For the smart entity "Level mark" added the "Text alignment" property and the "Note alignment" property.

Fix

Fixed a bug where the text was displaced vertically in the "Level mark" smart entity when it was left-sided.

AutoCAD: Auto layers 1.13.4.0 (27.08.2020)

New

Added commands "MIRROR" and "ADDSELECTED" to the standard list of commands to ignore.

Revit: Walls reinforcement 4.13.27.0 (26.08.2020)

New

Added collection of all errors that occur when creating reinforcement, with their subsequent display in a special window.

New

Added the ability to specify girth bars - horizontal or vertical - for stirrups.

New

Added a new type of vertical rebar joints - as separate L-shaped rebars.

Improved

Added value 2.0 for the coefficient α when calculating the length of anchoring.

The "Install and enable all" and "Disable all" commands now process only plugins visible in the list.

Revit: Dimensions by line 1.11.4.0 (20.08.2020)

New

Added the ability to enable/disable the creation of stirrups at the ends and intersections when creating details at the ends and intersections.

Improved

When creating stirrups at T-shaped intersections, the stirrups in the wall in which no details are created are not deleted (when creating one U-shaped detail at the intersection).

Improved

Added the ability to create only stirrups in walls (without creating vertical and/or horizontal reinforcement).

Improved

Improved the algorithm for creating spacing reinforcement when creating horizontal reinforcement for walls in which the location line is located at the top of the wall.

Fix

Fixed the error of creating intersection reinforcement if the main wall reinforcement is not created.

Fix

Fixed error loading rebar type from saved reinforcement settings.

Fix

Fixed a bug with saving the type of reinforcement for vertical bars of the openings reinforcement.

Fixed handling of elements from the linked files invisible on current plan.

Working libraries for Revit 5.2.4.0 (17.07.2020)

Fix

Fixed an error that occurs when building a tab on the ribbon when some plugins are disabled, but the adaptation menu is built as standard.

Revit: Context filter 1.3.9.0 (11.07.2020)

New

Added ability to close the filter after applying the action.

Improved

Improved algorithm of determining the availability of run of filter based on detach Revit windows.

Improved

From the list settings of the sequence, and shortcuts are removed the numbers.

Fix

Fixed saving sequences and shortcuts.

Configurator 9.7.0.0 (08.07.2020)

Fix

Fixed a bug where plugins of type IExternalApplication for Revit was removed from startup when open the Configurator.

Revit: Context filter 1.2.6.0 (06.07.2020) Read more

New

Added AND/OR condition.

New

Added the ability to exclude checked elements from the current selection.

Improved

The context filter now only runs if the Revit window is active.

Working libraries for Revit 5.2.3.0 (03.07.2020)

Improved

Removed loading of plugins type IExternalApplication due to unrecoverable problems.

Working libraries for Revit 5.2.2.0 (02.07.2020)

New

Added load plugins of type IExternalApplication in case of their absence in the file ModPlus.addin.

Revit: Walls reinforcement 4.6.21.0 (30.06.2020)

Fix

Minor fixes in design.

AutoCAD: Smart 1.7.4.0 (29.06.2020) Read more

New

Added a new smart object – Waterproofing.

Improved

Added a new property object "Straight Axis" - rotation Angle of text.

Revit: Walls reinforcement 4.6.19.0 (28.06.2020) Read more

New

Improved

Fixed full description of the plugin used in the tooltip for the button on the ribbon.

Revit: Context filter 1.1.0.0 (24.06.2020) Read more

New

Added configurable options to run the filter.

Revit: Context filter 1.0.0.0 (23.06.2020) Read more

Release

Release.

Configurator 9.6.3.0 (21.06.2020) Read more

New

Termination of support for Revit 2015, 2016.

New

The main algorithms for working with notes are moved to a separate library for later use in a similar plugin for Revit.

New

Added the ability to stretch the window.

Fixed bug with alignment of Level Marks.

AutoCAD: Smart 1.5.0.0 (13.06.2020) Read more

New

Added new intellectual object: be the benchmark.

Improved

Completely redesigned the properties palette.

Improved

Minor corrections and improvements.

Revit: Slabs reinforcement 1.12.0.0 (09.06.2020)

Improved

New

Added methods for retrieving localized names of the quantities.

Revit: Import from Excel 1.3.9.0 (06.06.2020)

Fix

Bug fix selection width in the localized value text buttons.

Revit: Walls reinforcement 4.5.17.0 (06.06.2020)

Improved

A list of rebars to create stirrups now filled with the rebars of all types of profile diameters less than or equal to the diameter of the main reinforcement.

Fix

Bug fix selection width in the localized value text buttons.

Fix

Fixed bug with wrong create length of stirrups for exterior location of background vertical rebars.

Revit: Slabs reinforcement 1.11.11.0 (06.06.2020)

Improved

Improved algorithm for determining the external and internal contours of the slab.

Improved

Improved hole grouping algorithm.

Improved

Improved contour detection algorithm for creating area reinforcement in slabs of complex configuration.

Fix

Fixed an error that occurs if the "Area Reinforcement" option is selected in the background reinforcement settings for the method of creating reinforcement, and background reinforcement creation is disabled.

Fix

Fixed an error when creating U-shaped bars in the frame of holes when the "Set with background reinforcement step" option is enabled, if only one part can be created on one of the faces of the hole.

Improved

Improved algorithm for building a tree based on a project browser with a high level of nesting.

Fixed load only one pattern, if a project has two patterns of different types but with same name.

Fix

Fixed some localization errors.

Configurator 9.3.2.0 (28.05.2020)

New

Added a link to Telegram channel on the tab "About".

New

Added check menu when closing.

Improved

Optimized work methods for building menu.

Improved

Fixed minor bugs when installing/updating plugins.

Revit: Sheet copy 2.7.7.0 (27.05.2020)

Fix

Fixed Assembly version, resulting in re-updating the plugin.

Auto Updates Module 8.0.0.0 (26.05.2020)

New

Added check hash sums of files that are updated, to avoid the repeated overwriting of the same files from different updates.

Improved

Updated system app icon.

Improved

Updated window display change history.

Configurator 9.1.0.0 (26.05.2020)

Fix

Fixed the lack of digital signature, leading to constant renewal.

Revit: Sheet copy 2.7.6.0 (26.05.2020)

New

Added the ability to control the parameters of the "Crop view", "Crop Region Visible" and "Annotations crop" for views that are copied as a dependent.

Improved

Added prohibition of entering invalid characters in numbers and sheet names, types, specifications.

Working libraries for AutoCAD 5.0.0.0 (23.05.2020) Read more

New

Added Web License Server.

Working libraries for Renga 3.0.0.0 (23.05.2020) Read more

New

Improved

Reduced the minimum value of the height of the window and added the vertical scroll bar for the settings.

Fix

Fixed duplication bug viewports that occur in some documents.

Revit: Copy sheets to documents 1.5.1.0 (05.05.2020)

New

Added the ability to copy raster images and PDF (only for Revit 2020 and above).

New

Added the ability to choose either if the target document already has a Legend with the same name as Legend in the copied sheet.

New

Added the ability to choose either if the target document already have a Drafting View that is not inserted for a single sheet, with the same name as the copied Drafting View.

New

Added a special icon that indicates if there are errors in log.

New

Added ability to enable/disable warnings suppression.

Fix

Fixed the error which occurred copying some elements when suppressing warnings.

AutoCAD: Tables 1.7.7.0 (04.05.2020)

New

Added the ability to mark a table flag "is favorite" and use the corresponding filter.

New

Added the ability to specify the layer for the created table.

Improved

General settings for tables from the plugin and tables from the specified file moved in the lower part of the window.

Fix

Fixed bug when reading a table from a file that is open in AutoCAD.

Fix

Fixed insert tables, if the layer "0" is locked.

Revit: Tools 2.3.2.0 (02.05.2020)

New

Added the ability to hide/show elements of category "Structural Foundation".

Improved

Added the ability to hide/show analytical model categories.

Improved

Commands hide/display elements by the category now work for views with the applied template, if the template settings not include override graphics for category.

Revit: Sheet numerator 2.1.4.0 (01.05.2020)

Fix

Fixed a bug in which the value of numbering recorded in the parameter when disable the advanced settings of the numbering.

Revit: Numbering 2.6.4.0 (01.05.2020)

New

Added the ability to number the numeric parameters in the schedules.

Improved

When numbering in a model of processing eliminated the group as the elements for numbering.

Improved

When writing values to the parameter element in the group, added additional check if the parameter is a type parameter. If it is, then the new value is written to the parameter.

Improved

Optimized some algorithms.

Revit: Walls reinforcement 4.4.15.0 (28.04.2020)

Fix

Fixed markup in the element of settings of the basic reinforcement of the walls.

Revit: Slabs reinforcement 1.8.8.0 (27.04.2020)

Fix

Fixed markup in the element of frame holes settings.

Revit: Slabs reinforcement 1.8.7.0 (26.04.2020) Read more

New

Added the ability to set the values of some text parameters for the created reinforcement.

New

Added the ability to reinforce holes of complex shapes, provided that all edges of the hole are parallel to the directions of reinforcement.

New

Added ability to save current reinforcement settings as default reinforcement settings.

New

Added the ability to create U-shaped rods in the frame of holes with a step of background reinforcing rods.

New

Added the ability to set the step of the rods for straight rods framing holes.

New

Added the ability to set the step multiplicity of U-shaped rods at the ends of plates with respect to the step of the background reinforcement rods.

New

Added the ability to create each U-shaped part at the ends of the plate with a separate rod.

New

Added the ability to apply the installed protective layer directly to the background mesh reinforcement.

Improved

Added the ability to specify the type of reinforcing bar in the drop-down lists by entering a value.

Improved

The icon of the button for copying reinforcement settings has been changed.

Improved

Improved hole search algorithm.

Improved

At the preview, a description rectangle display has been added for holes whose edges are not parallel to the reinforcement directions and for holes that have a complex shape.

Fix

Added the ability to specify the value of the design resistance greater than 415 MPa in the window for calculating anchoring.

Fix

The length of the U-shaped rods at the ends is now set according to the outer dimensions of the rod, in accordance with GOST 21.501-2018, clause 6.4.7.

Revit: Walls reinforcement 4.4.14.0 (26.04.2020) Read more

New

Added the ability to set the values of some text parameters for the created reinforcement.

New

Added ability to save current reinforcement settings as default reinforcement settings.

New

Added the ability to set the step of the rods for straight rods framing openings.

New

Added a button that allows you to group walls, intersections and openings according to the current grouping settings.

Improved

Added the ability to specify the type of reinforcing bar in the drop-down lists by entering a value.

Improved

The icon of the button for copying reinforcement settings has been changed.

Fix

Added the ability to specify the value of the design resistance greater than 415 MPa in the window for calculating anchoring.

Fix

The length of the U-shaped rods at the ends is now set according to the external dimensions of the rod, in accordance with GOST 21.501-2018, clause 6.4.7.

Fix

Fixed error setting the length of the U-shaped rods in the frame of the openings.

Configurator 8.12.0.0 (25.04.2020)

New

Download the story of the changes happening now when you go to the tab "About the programm" and only for specified year.

New

Added the possibility to display the change story only for the selected component.

New

Added the ability to go to the description page of the component directly from the change story.

Fixed display of terms "Not contains" in the display field filters .

Revit: Worksets 1.2.2.0 (12.04.2020)

New

To the filter elements by parameters added the condition "Not contains".

Revit: Dim offset 3.0.0.0 (11.04.2020)

New

Release

Release.

Revit: Walls reinforcement 4.0.8.0 (04.04.2020)

Fix

Minor bugs fixed.

Revit: Sheet copy 2.4.3.0 (03.04.2020)

New

Added display of sheets in a tree, repeating the display of the sheets in the Revit project browser.

Improved

If the sheets were selected in the Revit project browser, when you start the plugin, these sheets will be checked.

Improved

When you use the command undo (Ctrl Z) cancels all the result of the plugin, and not one sheet.

Improved

The new sheet names are not displayed by default in the text box and appear when you click on a text box or as the result of the function Search and Replace.

Fix

Minor bugs fixed.

Revit: Copy elements 1.2.6.0 (01.04.2020)

New

Added the possibility to display the guid of the shared parameters.

Improved

The tree elements are divided into two groups – types and other elements.

Fix

Fixed localization, leading to incorrect grouping of categories.

Auto Updates Module 7.7.2.0 (30.03.2020)

Fix

Fixed some bugs.

Configurator 8.6.2.0 (30.03.2020)

Fix

Fixed some bugs.

AutoCAD: Formats 2.12.0.0 (29.03.2020)

Added new field – the date used in title blocks, containing posts.

AutoCAD: Title blocks 1.8.0.0 (29.03.2020)

Added new field – the date used in title blocks, containing posts.

Added the ability to insert line breaks in certain fields.

Added the possibility to set an empty value for fields.

AutoCAD: Specifications 1.7.4.0 (29.03.2020)

In the choice of products from the database drop-down list the document names prefixed with the short name of the product and added sorting documents in alphabetical order.

AutoCAD: Product insert 2.4.8.0 (29.03.2020)

In the drop-down list of the document names prefixed with the short name of the product and added sorting documents in alphabetical order.

AutoCAD: Calculator 1.3.7.0 (28.03.2020)

Added the ability to use a comma as the delimiter between the integer and fractional parts of numbers in the entered formula.

Fixed some localization errors.

AutoCAD: Layout manager 1.11.0.0 (27.03.2020)

Added support for AutoCAD 2021.

AutoCAD: Select similar 1.4.0.0 (27.03.2020)

Added support for AutoCAD 2021.

AutoCAD: Sum of lengths 2.1.0.0 (27.03.2020)

Added support for AutoCAD 2021.

AutoCAD: Copy with numbering 2.4.0.0 (27.03.2020)

Added support for AutoCAD 2021.

Working libraries for AutoCAD 4.3.0.0 (27.03.2020)

Added support for AutoCAD 2021.

Configurator 8.6.0.0 (27.03.2020)

Added support for AutoCAD 2021.

Auto Updates Module 7.7.0.0 (27.03.2020)

Added support for AutoCAD 2021.

Auto Updates Module 7.6.3.0 (26.03.2020)

Changed directory for download the installation files.

Changes in the logging system errors.

AutoCAD: Templates. Stage P 1.2.5.0 (24.03.2020)

In all templates, the size of the filed with name of the organization has been changed from 1.7 cm to 2.4 cm in height, which allows to enter three lines in the field.

In all templates of capital construction objects, incorrect designations of sections in the design documentation are corrected - SD changed to SM, EF changed to EE.

Revit: Fill patterns 1.1.3.0 (19.03.2020)

Fixed duplication of some patterns in the list.

Fixed some errors when exporting hatching to pat file.

Fixed bug causing Revit to close when change import scale on hatch import from pat file.

Auto Updates Module 7.6.1.0 (17.03.2020)

Made corrections in the upgrade localization files tool.

Revit: Fill patterns 1.1.0.0 (12.03.2020)

Fixed import patterns from pat file in operating systems, in which the comma is set as separator of the integer and fractional parts of numbers.

AutoCAD: Smart 1.4.13.0 (12.03.2020)

Fixed error running the command BEDIT at a pre-selected block.

Revit: Copy elements 1.1.3.0 (06.03.2020)

Added tree search.

Grouping of views templates by type.

Fixed error displaying "_".

AutoCAD: Smart 1.4.12.0 (04.03.2020)

Ignoring error NotAllowedForThisProxy that occurs when drag grips of some dynamic blocks.

Revit: CAD manager 1.2.6.0 (04.03.2020)

Fixed bug with incorrect display names of some dwg imports.

Revit: Walls reinforcement 4.0.7.0 (01.03.2020)

The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed.

Revit: Dimensions by line 1.10.1.0 (01.03.2020)

The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed.

Revit: Dimensions on plan 1.0.4.0 (01.03.2020)

The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed.

Revit: External dimensions on plan 1.5.1.0 (01.03.2020)

The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed.

Revit: Worksets 1.1.2.0 (28.02.2020)

Added additional check for configurations before creating worksets.

Added preliminary check of the selected xml file when import.

Revit: Batch Rename 1.1.3.0 (27.02.2020)

Added the ability to change parameters property "Parameter of type/instance".

Fixed the wrong entering numerical parameters when change parameter values.

Added sorting when the values are displayed in all lists.

AutoCAD: Specifications 1.7.3.0 (26.02.2020)

Fixed a bug with inserting tables with merged cells.

Fixed bug adding items with missing properties "Position", "Count" and "Note".

AutoCAD: Specifications 1.7.1.0 (17.02.2020)

Minor fixes.

AutoCAD: Specifications 1.7.0.0 (17.02.2020)

Added the ability to insert new positions into the specification without closing the window for selecting items from the database or the manual input window.

The error of changing the data of the edited position when setting the “Save entered dimension values” checkbox is fixed.

Revit: Sheet copy 2.1.0.0 (17.02.2020)

Added duplication of drafting views with the option "Copy detail" regardless of the option selected in the plugin window.

Revit: Fill patterns 1.0.0.0 (16.02.2020)

Release

Release.

Auto Updates Module 7.6.0.0 (15.02.2020)

Changed icons in the taskbar.

Revit: Copy elements 1.0.0.0 (12.02.2020)

Release

Release.

AutoCAD: Dwg base 1.4.0.0 (06.02.2020)

Removed the restriction of using files 2013 version when adding blocks and drawings in the user database.

Configurator 8.5.0.0 (06.02.2020)

Fixed some errors when loading the plugin list.

Auto Updates Module 7.5.0.0 (06.02.2020)

Increased the time of verification of purchased licenses.

Fixed error caused by disabling notifications in Windows 10.

AutoCAD: Specifications 1.6.11.0 (03.02.2020)

Fixed some bugs.

Revit: Worksets 1.1.0.0 (01.02.2020)

Safe execution has been added - if an error occurs when setting the "Workset" parameter for an element, the plugin will not stop working, and elements with an error will be displayed in the result window.

Revit: Model cleaning 2.0.0.0 (31.01.2020)

The work of the plugin is divided into tabs.

Added a tab for work with the view templates.

Auto Updates Module 7.4.5.0 (30.01.2020)

Fixed error updating the Dwg base to the folder with the installed version of ModPlus instead of the user data location folder.

Revit: Walls reinforcement 4.0.5.0 (29.01.2020)

Fixed some bugs.

Revit: Dimensions by line 1.10.0.0 (25.01.2020)

Added handling of IFC reinforcement.

Revit: Cropping view 1.0.2.0 (23.01.2020)

Fixed "Curve length is too small for Revit's tolerance".

Revit: Copy sheets to documents 1.2.0.0 (23.01.2020)

Added window displaying errors that occurred when trying to copy sheets.

If sheets were selected in the project browser before starting the plugin, they will be checked in the plugin window.

When open the plugin, groups of sheets that do not have previously checked sheets appear collapsed.

Fixed display of documents with names containing underscores.

Revit: Fix duplicates 1.2.1.0 (23.01.2020)

Added explanatory message in select pair of families.

Auto Updates Module 7.4.4.0 (19.01.2020)

Service update.

Revit: Tools 2.1.1.0 (19.01.2020)

Fixed minor bugs.

Working libraries for Revit 4.2.3.0 (19.01.2020)

Service update.

Revit: Model cleaning 1.1.0.0 (15.01.2020)

Added the ability to remove the coordination models.

Revit: Tools 2.1.0.0 (14.01.2020)

Fixed error running the command "Grids Mode".

Revit: External dimensions on plan 1.5.0.0 (14.01.2020)

Fixed wrong indentation from the outer walls to the first dimension chain.

Revit: Fix duplicates 1.2.0.0 (11.01.2020)

Added copy parameter values of type ElementId when copy parameter values from instance of the replaced family.

Added ability to set for instances of duplicate families type from the source family.

Revit: Model cleaning 1.0.2.0 (11.01.2020)

Added deletion of uploaded links for the option "Delete all linked files".

Revit: Dimensions on plan 1.0.3.0 (10.01.2020)

Fixed problem with not closing the progress window if no suitable walls for processing.

Auto Updates Module 7.4.3.0 (09.01.2020)

Fixed an error in incorrectly defining the current user name when running the application as an administrator who is not the current user.

Configurator 8.4.2.0 (09.01.2020)

Fixed an error in incorrectly defining the current user name when running the application as an administrator who is not the current user.

Working libraries for Revit 4.2.2.0 (08.01.2020)

Service update.

Revit: Tools 2.0.4.0 (08.01.2020)

Removed the inscription in the ribbon for the buttons "Grids mode" and "Rebars outside host".

Revit: Sheet copy 2.0.3.0 (08.01.2020)

Added search and replace in the names of duplicate views.

Auto Updates Module 7.4.2.0 (07.01.2020)

Fixed some bugs in notification of new licenses in the personal account.

Revit: Model cleaning 1.0.1.0 (07.01.2020)

Added saving of checked status of the wipe options.

Revit: Dim offset 2.3.0.0 (07.01.2020)

The maximum value of the coefficient of displacement increased from 1.0 to 2.0.

2019 Year

Auto Updates Module 7.4.1.0 (29.12.2019)

Fixed a bug where the standard menu of adaptation was updated without adding plugins with small icons.

Configurator 8.4.1.0 (29.12.2019)

Fixed links when you go to the plugin page.

Revit: Sheet copy 2.0.2.0 (27.12.2019)

Improved sorting of sheets by number.

Added the ability to stretch the window.

Revit: Sheet numerator 2.1.3.0 (26.12.2019) Read more

Update related to replacement of support library.

Revit: Copy sheets to documents 1.1.5.0 (26.12.2019) Read more

Update related to replacement of support library.

Revit: Worksets 1.0.2.0 (25.12.2019) Read more

Update related to replacement of support library.

Revit: Batch Rename 1.0.1.0 (25.12.2019) Read more

Update related to replacement of support library.

Configurator 8.4.0.0 (25.12.2019) Read more

Replacement of support library.

Auto Updates Module 7.4.0.0 (25.12.2019) Read more

Replacement of support library.

AutoCAD: Smart 1.4.11.0 (25.12.2019)

Service update.

Revit: Sheet numerator 2.1.2.0 (24.12.2019)

Fixed error "Index was outside the bounds of the array" when reading the sheets of the project.

Revit: Copy sheets to documents 1.1.4.0 (24.12.2019)

Removed "Top most" property and added focus to the plugin window at the end of the copy sheets.

Fixed error "Index was outside the bounds of the array" when reading the sheets of the project.

Revit: Batch Rename 1.0.0.0 (24.12.2019)

Release

Release.

Configurator 8.3.1.0 (19.12.2019)

Fixed bug in search for installed versions of AutoCAD if in the registry data after incorrect removal of older versions of AutoCAD.

Auto Updates Module 7.3.0.0 (19.12.2019)

Fixed re-show the notification when you buy licenses.

AutoCAD: Fast text copy 2.0.0.0 (16.12.2019)

Added the ability to get the value from the multileader, table cell and dimension.

Added the ability to insert new value in the multileader and table cell.

Revit: Worksets 1.0.1.0 (16.12.2019)

Minor fixes.

Revit: Worksets 1.0.0.0 (15.12.2019)

Release

Increased the time between retries update in case of busy files.

Fixed some bugs.

Working libraries for Revit 4.1.9.0 (18.11.2019)

Improved fault tolerance during loading of the application in case of an error when receiving the registration data of the user.

Working libraries for AutoCAD 4.2.9.0 (18.11.2019)

Improved fault tolerance during loading of the application in case of an error when receiving the registration data of the user.

AutoCAD: Dwg base 1.3.0.0 (18.11.2019)

Added alphabetical sorting.

AutoCAD: Dwg base 1.2.0.0 (16.11.2019)

Fixed "Method not found" when validating access to the internet.

Method for sending user files to add to the public database is replaced with the ftp to http.

Revit: Walls reinforcement 4.0.3.0 (16.11.2019)

Fixed error "The given value for value is not finite", arising from the creation of joints with the big bend from the base plate.

Configurator 8.1.5.0 (16.11.2019)

Fixed bug when trying to save an empty menu adaptation.

Auto Updates Module 7.2.18.0 (13.11.2019)

Fixed error cyclic update support libraries.

AutoCAD: Formats 2.11.0.0 (13.11.2019)

Fixed eSelfReference exception that occurs when insert a logo in the title block from the file.

AutoCAD: Title blocks 1.7.0.0 (12.11.2019)

Fixed eSelfReference exception that occurs when insert a logo in the title block from the file.

Auto Updates Module 7.2.17.0 (12.11.2019)

Fixed some bugs.

Revit: Sheet copy 2.0.0.0 (10.11.2019)

Added the ability to specify a new name for the duplicate.

Added search and replace in the new names of duplicate sheets.

AutoCAD: Formats 2.10.0.0 (09.11.2019)

Added formats by ISO 2016.

Added ability to set stamp by ISO 7200:2400.

Added the ability to specify the multiple dimensions of formats compliance table GOST.

Auto Updates Module 7.2.16.0 (06.11.2019)

Check period default changed from 30 minutes to 4 hours.

Revit: Copy sheets to documents 1.0.2.0 (05.11.2019)

Added property "Top Most" for window.

Added completion message to the copy sheets.

Auto Updates Module 7.2.15.0 (04.11.2019)

Fixed some bugs.

Revit: Copy sheets to documents 1.0.0.0 (03.11.2019) Read more

Release

Release.

Working libraries for Revit 4.1.8.0 (03.11.2019)

Fixed the ribbon.

Working libraries for AutoCAD 4.2.8.0 (02.11.2019)

Fixed help links for mini-plugins in the settings window.

Working libraries for Revit 4.1.7.0 (02.11.2019)

Modified address access the help by pressing F1.

Working libraries for AutoCAD 4.2.7.0 (02.11.2019)

Fixed some bugs.

Working libraries for AutoCAD 4.2.6.0 (02.11.2019)

Modified address access the help by pressing F1.

Configurator 8.1.4.1 (02.11.2019)

Amendments to the license agreement.

Auto Updates Module 7.2.14.0 (02.11.2019)

Added more information when sending errors.

Added support for SSL/TLS protocols when they access the web services.

Added option not to show notifications for unimportant updates.

Fixed bugs with the "Do not remind" flag when new functions are available.

Optimized update checking methods.

Fixed various small bugs.

Revit: Cropping view 1.0.0.0 (08.10.2019) Read more

Release

Release.

AutoCAD: Notes 2.4.2.0 (03.10.2019)

Removed server work (backup).

Working libraries for Revit 4.1.5.0 (03.10.2019)

Fixed access to your personal account.

Working libraries for AutoCAD 4.2.4.0 (03.10.2019)

Fixed access to your personal account.

Auto Updates Module 6.0.7.0 (01.10.2019)

Fixed some bugs.

Configurator 8.1.3.0 (01.10.2019) Read more

Removed work with configuration file from the Settings tab.

In Personal account added a new feature – backup settings.

AutoCAD: Product insert 2.4.6.0 (28.09.2019)

Added the ability to specify the block scale products.

AutoCAD: Draworder by layer 1.1.8.0 (28.09.2019)

Corrected icon functions.

Fixed some bugs.

AutoCAD: Layout manager 1.10.6.0 (28.09.2019)

Added check for invalid characters in the name when you create and rename a layout.

AutoCAD: Formats 2.7.1.0 (28.09.2019)

Added check for blank value is entered the layout name.

Added the ability to apply the current layer to create tables and block.

AutoCAD: Title blocks 1.6.5.0 (28.09.2019)

Fixed a bug adding a large indentation in the cell.

Added usage of the current layer to the pasted stamp.

Revit: Sheet numerator 2.1.0.0 (28.09.2019)

Added saving of input values of the component parts of the number of the page for advanced configuration numbering.

AutoCAD: Standards 2.5.9.0 (28.09.2019)

Storing user-defined standards moved from configuration file to a separate file.

AutoCAD: Specifications 1.6.9.0 (28.09.2019)

Fixed some bugs.

AutoCAD: Auto layers 1.13.2.0 (22.09.2019)

Added the ability to set the layer for xlines, rays, circles, ellipses, splines, arcs,.

Corrected icon functions.

Changed function description.

AutoCAD: Auto layers 1.7.0.0 (21.09.2019)

Added the ability to set a layer for lines and polylines.

Revit: Dimensions by line 1.9.7.0 (19.09.2019)

Added handling of curtain walls: the outline of the curtain wall, panels, the mullions, the grid lines.

AutoCAD: Smart 1.4.10.0 (18.09.2019)

Added update of existing intellectual entities when the document is opened.

AutoCAD: Reinforcement 1.1.8.0 (18.09.2019)

Fixed a typo in the report calculate the length of anchoring.

Revit: Walls reinforcement 3.6.11.0 (18.09.2019)

Added the ability to specify the number (from 1 to 3) and the step of additional vertical rebars at the ends of the walls.

Fixed the error of the indentation of vertical rebars from the ends of the walls in the case of creating U-shaped rebars at the ends.

Added the ability to specify the option of choosing walls and foundation plates - frame selection or selection by pick elements.

Fixed the error of incorrect display of the numerical parameters of the walls when grouping.

Added ability to re-analyze selected walls.

Added processing of pre-selected walls when starting the function.

Added the ability to disable the property "Trim joints by wall body" for joints from foundation plates.

AutoCAD: Clear formatting 1.0.1.0 (14.09.2019)

Fixed a bug that occurred when trying to clear columns of text with a zero width.

Auto Updates Module 6.0.6.0 (10.09.2019)

Changes in methods of updating localization files.

Revit: Walls reinforcement 3.1.9.0 (09.09.2019)

Fixed length setting anchoring to a U-shaped rods horizontally in the reinforcement of openings.

Fixed some bugs.

Data bases 2.2.0.9 (09.09.2019)

Fixed a typo in the GOST R 57837-2017.

Revit: External dimensions on plan 1.4.0.0 (07.09.2019)

Fixed handling of openings in the wall created by the Opening element.

The creation of dimensions are combined into one transaction, allowing you to undo the creation of all the dimension chains at once.

Revit: Numbering 2.5.0.0 (07.09.2019)

Added an indication of whether the selected parameter instance or type parameter.

Fixed some bugs.

Revit: Rebar solid and visible 2.0.4.0 (05.09.2019)

Added handling of Rebar Containers (Revit 2016 and later).

Configurator 8.0.3.0 (05.09.2019)

Fixed some bugs.

Replaced third-party library.

Auto Updates Module 6.0.5.0 (04.09.2019)

Fixed some bugs.

Revit: Numbering 2.3.0.0 (04.09.2019)

Added the ability to fill in the parameters of type for schedules with the unchecked "Itemized every instance".

Revit: Import from Excel 1.3.8.0 (04.09.2019)

Added capturing and displaying top-level errors.

Revit: Walls reinforcement 3.1.7.0 (31.08.2019)

Changes in the algorithms for finding intersections with a given wall with a cancelled accession.

AutoCAD: Sum of lengths 2.0.0.0 (31.08.2019) Read more

Completely rewritten function code.

Added the ability to get the sum of the lengths of selected entities without closing the window function.

Insert the result as text, in a table cell and export to Notepad take into account the separator of the integer and fractional digits specified in the settings.

Added display of the length of each entity.

Revit: Fix duplicates 1.0.8.0 (29.08.2019)

Changes in the algorithm of copying of parameters of the instance model families.

The possibility of concurrent selection of equal types of different family duplicates that belong to the main family.

Revit: Fix duplicates 1.0.6.0 (27.08.2019)

Added the ability to copy the parameter values of instances of families.

Improved responsiveness of the interface when displaying progress.

Revit: Fix duplicates 1.0.4.0 (21.08.2019)

Fixed output of empty list of errors that occurred when the function work.

Fixed error "The given key was not present in the dictionary" when replace instances of families.

Added additional check for a match type parameters in search of similar families (duplicates).

AutoCAD: Draworder by layer 1.1.6.0 (19.08.2019)

Added regeneration after changing the drawing order.

AutoCAD: Smart 1.4.9.0 (19.08.2019)

Check erased layers before using.

Revit: Tools 2.0.3.0 (19.08.2019)

Fixed the error “Unexpected tab”.

Revit: Dim offset 2.2.5.0 (19.08.2019)

Fixed the error “Unexpected tab”.

Working libraries for Revit 4.1.4.0 (19.08.2019)

Changes in the construction methods tab on the ribbon.

Revit: Fix duplicates 1.0.1.0 (18.08.2019)

Excluded from the computation of the family, which is a Generic model.

Revit: Walls reinforcement 3.1.6.0 (18.08.2019)

Added option when specifying a base plate to support the floor choose.

Fixed error filling in the maximum step of the vertical rebars.

Fixed a bug which releases the vertical rebars were created in the openings.

Fixed some bugs.

Working libraries for Revit 4.1.3.0 (12.08.2019)

Fixed a build error blank panels on the ribbon.

Added links to help for Personal account and Settings.

Working libraries for AutoCAD 4.2.3.0 (12.08.2019)

Added a button to launch a Personal account from "Functions" palette.

Fixed help link for the button "Personal account" on the ribbon.

Configurator 8.0.2.0 (11.08.2019)

Fixed some bugs when working with adaptation menu.

Working libraries for Revit 4.1.1.0 (11.08.2019)

Small fixes in the code.

Working libraries for AutoCAD 4.2.1.0 (11.08.2019)

Small fixes in the code.

Revit: Dimensions by line 1.9.3.0 (05.08.2019)

Fixed a bug that occurs when trying to work the function in Assembly views.

Working libraries for AutoCAD 4.2.0.0 (04.08.2019) Read more

Added the ability to change the localization language of the application.

Added a new mini-function "Set Nested Objects layer".

Working libraries for Revit 4.1.0.0 (04.08.2019)

Added the ability to change the localization language of the application.

AutoCAD: Smart 1.4.8.0 (04.08.2019)

Added setting of layer “0” for all entities inside the block of intellectual entity.

Fixed the error of saving selected properties (drop-down list) when creating custom styles.

Revit: Import from Excel 1.3.7.0 (03.08.2019)

Added processing of text rotated 90 degrees (only Revit 2019 and higher).

Revit: Sheet copy 1.8.2.0 (26.07.2019)

Added sorting of the sheets in the list in alphabetical order.

Revit: Numbering 2.2.5.0 (26.07.2019)

Replaced the method of elements selection on non-schedule views - selection picking elements instead of the select by frame.

Some changes have been made to the processing parameters of elements located in groups.

Revit: Sheet copy 1.8.1.0 (24.07.2019)

Fixed error "The given element id set is empty".

Revit: CAD manager 1.2.5.0 (23.07.2019)

Small changes in the design.

Revit: Numbering 2.2.3.0 (22.07.2019)

Fixed a display problem in the drop-down list of parameters whose names contain underscores.

Added saving of the selected parameter in the schedule.

Added the ability to number elements in groups.

Revit: Dim offset 2.2.4.0 (21.07.2019)

Added a warning about the offset of the dimension text when editing.

Added the ability to perform text offset to selected dimensions.

Added the ability to restore the position of the dimension text for the selected dimensions.

Excluded Spot Dimensions and the dimensions with the property "Equality Display" equal "Equality Formula».

AutoCAD: Totals 2.2.1.0 (19.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

AutoCAD: Specifications 1.6.8.0 (19.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

AutoCAD: Standards 2.4.5.0 (19.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

AutoCAD: Notes 2.3.2.0 (19.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

Fixed errors when sending and downloading files with notes.

AutoCAD: Tables 1.5.4.0 (18.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

AutoCAD: Formats 2.5.1.0 (18.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

AutoCAD: Title blocks 1.6.2.0 (18.07.2019)

Fixed problem adding not valid (empty name) text style to the list of text styles.

Revit: Walls reinforcement 3.0.3.0 (18.07.2019)

Fixed some bugs.

AutoCAD: Title blocks 1.6.1.0 (18.07.2019)

Fixed the cause of the error eNotImplementedYet in AutoCAD 2013-2017.

AutoCAD: Title blocks 1.6.0.0 (17.07.2019)

Added title blocks according to ISO 7200:2004.

Added a field to fill title blocks on ISO 7200:2004.

Revit: Numbering 2.2.0.0 (16.07.2019)

Added the ability to order marking is schedules with unchecked "Itemize every instance".

Revit: Sheet copy 1.8.0.0 (13.07.2019)

Added the ability to duplicate text notes that appears on the sheets.

AutoCAD: Draworder by layer 1.1.5.0 (11.07.2019)

Fixed the cause of a fatal error when you try to change the drawing order in the case that there are no entities on selected layers.

AutoCAD: Draworder by layer 1.1.4.0 (09.07.2019)

Added the ability to save and load the adjusted position of the layers in the current drawing.

AutoCAD: Smart 1.4.5.0 (09.07.2019)

Completely removed support for old data storage options of intelligent entities.

Added accounting of the properties palette operation for entities located on the locked layer.

Added the ability to create intelligent entities in the case that the current layer is locked.

Auto Updates Module 6.0.1.0 (09.07.2019)

Added a popup message in case of missing updates when you manually check for updates.

Revit: Import from Excel 1.3.6.0 (01.07.2019)

Fixed error when trying to create text cells that contain only whitespace.

Working libraries for AutoCAD 4.0.0.0 (30.06.2019) Read more

Removed registration key from the settings window.

Added start Personal account.

Auto Updates Module 6.0.0.0 (30.06.2019) Read more

Added sync service personal data.

Configurator 8.0.0.0 (30.06.2019) Read more

Removed the Registration tab.

Removed buttons to operate the activation keys.

Added button to open a Personal account.

Revit: Walls reinforcement 3.0.2.0 (18.06.2019)

Fixed problem creating only the joints from foundation plates.

Fixed creation of joints from the foundation plates in the presence of the intersections of the walls.

Revit: Dimensions by line 1.9.2.0 (09.06.2019)

Reduced tolerance when checking the parallelism geometry.

In the configuration window-added column "Note".

Added category "Structure Foundation".

Added category "Ceilings".

Optimization of some algorithms.

Revit: Dim offset 2.0.2.0 (03.06.2019)

Fixed some minor bugs.

Revit: Walls reinforcement 3.0.0.0 (02.06.2019)

Added the ability to create U-shaped rods at the upper end of the wall.

Added the ability to create the indirect reinforcement rods in the framing of openings.

Added the ability to configure the releases of the vertical rods of the main reinforcement.

Auto Updates Module 5.1.1.0 (22.05.2019)

Made changes that should fix the cause of the error, where the support libraries are downloaded with zero size.

Revit: Sheet numerator 2.0.0.0 (13.05.2019) Read more

Added advanced settings for the numbering of sheets with the ability to record part numbers in the parameter.

Auto Updates Module 5.1.0.0 (09.05.2019)

Added versioning (not displayed) and update support libraries.

Small changes in the design of popup window with notifications.

Configurator 7.1.0.0 (09.05.2019)

Added absorption errors that may occur when updating tray icon.

Removed support library ModPlusIconPacks.dll.

Optimized method of saving the configuration file.

Auto Updates Module 5.0.3.0 (07.05.2019)

Fixed some minor bugs.

Configurator 7.0.3.0 (07.05.2019)

Fixed some minor bugs.

AutoCAD: Smart 1.4.2.0 (04.05.2019)

Fixed display name of the selected style in the properties palette.

Added consideration styles that are not in current database of user styles.

AutoCAD: Notes 2.3.0.0 (04.05.2019)

Upload and download files with user notes replaced with the FTP server on the web server.

Auto Updates Module 5.0.0.0 (04.05.2019)

The changes are subject to the transfer of information on current versions of the components, functions, and news to web services.

Configurator 7.0.0.0 (04.05.2019)

The changes are subject to the transfer of information on current versions of components and functions in web services.

Added the ability to view multiple video features, if available.

Fixed some minor bugs.

AutoCAD: Reinforcement 1.1.7.0 (04.05.2019)

Amended, taking into account the updating of the STB 1704-2012.

Data bases 2.2.0.8 (04.05.2019)

In the document of STB 1704-2012 removed class S400 rebar.

AutoCAD: Dwg base 1.1.8.0 (04.05.2019)

The transfer database directory to the folder to store user settings.

Data bases 2.2.0.7 (27.04.2019)

Updating document STB 1704-2012.

Configurator 6.6.0.0 (15.04.2019) Read more

Added methods for working with a web server.

Uploading and downloading of keys and configuration file are replaced with FTP servers to the web server.

In all the Windows added the option to display progress during asynchronous operations.

Download of the configuration file when you first start happening now until startup logo will appear.

AutoCAD: Product insert 2.3.6.0 (03.04.2019)

Changed status display of the document from icons to text.

Revit: Sheet numerator 1.0.1.0 (02.04.2019)

Fixed minor bugs.

AutoCAD: Sheet numbering 1.3.7.0 (01.04.2019)

Minor bugs fixed.

Configurator 6.2.1.0 (01.04.2019)

Added new theme – Dark AutoCAD 2020.

AutoCAD: Title blocks 1.5.2.0 (01.04.2019)

Fixed background color for images in dark themes.

AutoCAD: Title blocks 1.5.1.0 (01.04.2019)

Fixed a typo in the values of the positions of Ukraine.

Auto Updates Module 4.0.3.0 (30.03.2019)

Added support for AutoCAD 2020.

Working libraries for AutoCAD 3.0.4.0 (30.03.2019)

Added support for AutoCAD 2020.

Configurator 6.2.0.0 (30.03.2019)

Added support for AutoCAD 2020.

Added language translation depending on current language.

Removed link to Google+.

AutoCAD: Sheet numbering 1.3.6.0 (19.03.2019)

Fixed eNullObjectId exception, which could occur in earlier supported versions of AutoCAD.

AutoCAD: Smart 1.4.0.0 (16.03.2019)

Added new command allowing to search the intellectual entities of the specified types.

Working libraries for AutoCAD 3.0.3.0 (16.03.2019)

Added help when you press F1 for buttons on the ribbon.

Revit: Rebar solid and visible 2.0.3.1 (11.03.2019)

Fixed some minor bugs.

Revit: External dimensions on plan 1.2.3.0 (08.03.2019)

Fixed some bugs.

Auto Updates Module 4.0.2.0 (08.03.2019)

Added check time of the last edit of the file in case of updates of already existing files.

AutoCAD: Standards 2.4.4.0 (03.03.2019)

Added the ability to export standards in a separate xml file and then import.

Fixed saving of the set of layers.

Revit: Import from Excel 1.3.5.0 (03.03.2019)

Fixed bug with reading Excel file with number of sheets is less than three in the limited version of the function.

Revit: CAD manager 1.2.3.0 (03.03.2019)

Changed the search priority: first, insert of import (ImportInstance), then the description of import (CADLinkType), if no inserts.

Revit: 3D section box 1.2.1.0 (03.03.2019)

Reduced minimum distance of crop box.

Configurator 6.1.0.0 (02.03.2019)

Added support for Revit 2020.

Binding to Google account is divided in two attempts. The first attempt does not require administrator rights.

Added error report to error window.

Working libraries for Revit 3.2.2.0 (02.03.2019)

Added support for Revit 2020.

Revit: Walls reinforcement 2.0.1.0 (28.02.2019)

Added the ability to insert additional vertical rebars in the ends of the walls.

Revit: Rebar solid and visible 2.0.3.0 (23.02.2019)

Added the ability to handle not only the rebar in the selected elements, but selected rebar.

Working libraries for AutoCAD 3.0.1.0 (21.02.2019)

Fixed saving of email address in the settings window.

Working libraries for Revit 3.0.2.0 (21.02.2019)

Fixed call of the contextual help for the split buttons on the ribbon.

Revit: Walls reinforcement 2.0.0.0 (21.02.2019)

Added the ability to create reinforcement joints (6 types) from base plates located directly under the walls to be processed.

The list of diameters of reinforcing bars is changed according to GOST 34028-2016.

Fixed a bug due to which it was not possible to update the default reinforcement settings.

Changed the way of specifying the binding of rods of vertical reinforcement of walls from the drop-down list to the input field of multiples of 1 mm.

Added display of information about the cover of the main reinforcement of walls, taking into account the entered data.

Added the ability to not close the function window after creating reinforcement.

Fixed a bug due to which previously created stirrups were not removed when re-reinforcing.

When creating stirrups, the intersections are not taken into account, unless the "Reinforcement of intersections" checkbox is not checked.

Added the ability to reset the default reinforcement settings to the values included in the function.

Added option for processing the additional step of vertical reinforcement of walls - to shift to both edges of the wall.

Added display of status of the normative document.

Data bases 2.2.0.6 (07.02.2019)

Added GOST 34028-2016.

GOST 5781-82 and GOST 10884-94 marked as inactive.

AutoCAD: Normative base 1.1.5.0 (06.02.2019)

Added display of status of the selected normative document.

Revit: Rebar solid and visible 2.0.1.0 (06.02.2019)

Minor bugs fixed.

Revit: Rebar solid and visible 2.0.0.0 (06.02.2019)

Added ability to process multiple elements or all elements on the view.

Added the ability to disable the visible properties for the rebars.

Added settings window options of select elements for functions.

Revit: Numbering 2.1.2.0 (04.02.2019)

Fixed some bugs.

Revit: Numbering 2.1.1.0 (04.02.2019)

Fixed bug of functions in schedules, in which there is a hidden field "Comment" used by function.

Configurator 5.3.5.0 (27.01.2019)

Added a window displaying the license agreement when you first start in case of manual installation.

Fixed a problem changing the colors of the buttons if you frequently move the mouse.

Added methods that will be required for new functions.

Configurator 5.3.2.0 (19.01.2019)

In the library design fixed bug not allowing to access some of the functions.

Configurator 5.3.1.0 (19.01.2019)

Fixed a bug in the library window design, leading to fatal errors when called the Windows operating in parallel flow (for example, the Function "Import from Excel").

Working libraries for Revit 2.4.0.0 (18.01.2019) Read more

In the plugin settings window added the elements to work with LAN license Server: set the address to ping, to stop/resume a connection, disable the connection at next run.

Working libraries for AutoCAD 2.5.0.0 (18.01.2019) Read more

In the plugin settings window added the elements to work with LAN license Server: set the address to ping, to stop/resume a connection, disable the connection at next run.

AutoCAD: Layout manager 1.9.6.0 (14.01.2019)

Fixed a fatal error in some drawings, when select a layout in the Manager.

Revit: Tools 1.2.0.0 (13.01.2019)

Added new command "Rebars outside host".

Revit: Numbering 2.1.0.0 (12.01.2019)

Added handling pre-selection.

Auto Updates Module 3.1.8.0 (12.01.2019)

Fixed some bugs in the library for plugin design.

Fixed some bugs that can occur when updating localization files.

Auto Updates Module 3.1.7.0 (08.01.2019)

Fixed some bugs.

AutoCAD: Tables 1.5.3.0 (07.01.2019)

Pan the preview images is changed with the mouse wheel to left mouse button.

When the table is selected in the list the scale of the preview image is reset.

Changed the display of preview images.

Added a new tables (form 1 – form 10) according to GOST 21.613-2014.

Auto Updates Module 3.1.6.0 (04.01.2019)

Optimization of verification of changes and news at the time.

Fixed re-rebuild of menu of adaptation after installing the new functions.

Added display of change history in a separate window instead of go to the site.

Changes in the design of the buttons in the module windows.

Fixed freezing of context menu while checking the updates, called through the context menu.

More compact display information about installed or updated functions under different versions of the same supported product.

Reduced time between loading module and the first check for updates to 1 minute.

Added message about the end of the subscription period if less than 7 days. Check subscription period is done once after 2 minutes after the start of the module.

AutoCAD: Sheet numbering 1.3.4.0 (02.01.2019)

Added the ability to sort formats by the coordinates obtained from model space.

Working libraries for Renga 1.0.4.0 (02.01.2019)

Added methods for working with LAN license server.

Working libraries for Revit 2.3.1.0 (02.01.2019)

Added methods for working with LAN license server.

Working libraries for AutoCAD 2.4.3.0 (02.01.2019)

Added methods for working with LAN license server.

Configurator 5.3.0.0 (02.01.2019)

Added settings for LAN license server.

Small changes in design.

2018 Year

AutoCAD: Smart 1.3.8.0 (28.12.2018)

Changes in method of data storage in intellectual entities to improve the stability.

Auto Updates Module 3.0.8.0 (27.12.2018)

Increased the time to check the news.

Configurator 5.2.1.0 (26.12.2018)

Improved service of collecting and sending error – added more error information.

Auto Updates Module 3.0.7.0 (26.12.2018)

Fixed some ways to access the website modplus.org that was handled incorrectly on some computers.

Replaced icons and color in context menu.

Revit: Tools 1.1.1.0 (23.12.2018)

Added check for view template when working the command "Hide/Show".

Revit: Numbering 2.0.0.0 (23.12.2018)

Added ability to specify initial value.

Added the ability to specify the parameter to be written to a numbered mark.

Added the possibility to specify the numbering order.

Added a restriction - function does not work in the specifications, in the properties of the sort which removed the tick "Itemized every instance".

Working libraries for Renga 1.0.3.1 (18.12.2018)

Minor changes in the methods of constructing menus that are required for new functions.

Working libraries for Renga 1.0.3.0 (18.12.2018)

The transition to product support Renga version 13 and above.

Added processing MEP objects, plates and signs (axes, levels, sections) for the function "Filter".

Revit: Dim offset 1.2.6.0 (11.12.2018)

Disabling automatic dimensions offset when synchronizing with the Central model.

Revit: Sheet copy 1.7.6.0 (09.12.2018)

Corrected work show "Select all/deselect" given search filter.

Added displaying the number of selected sheets.

Small changes in the design window.

Data bases 2.2.0.5 (08.12.2018)

Documents: СТО АСЧМ 20-93, ГОСТ 8239-89, ГОСТ 26020-83 marked as "Inactive".

Added a new document ГОСТ Р 57837-2017 "Двутавры стальные горячекатаные с параллельными гранями полок. Технические условия".

AutoCAD: Smart 1.3.7.0 (08.12.2018)

Changed the linetype scale of the default entity "Straight axis" from 1 to 10.

Changed the method of storing data in the entities, preventing damage of entities after run the command AUDIT (only for newly created entities or before the first editing entities).

AutoCAD: Standards 2.3.3.0 (04.12.2018)

Improved stability and fault tolerance when creating styles.

Fixed minor bugs in window and code.

AutoCAD: Dwg base 1.1.7.0 (03.12.2018)

The window of the plugin added a link to video instructions for working with the plugin.

In the table properties of the block (drawing) added tooltips displaying the properties for comfortable reading long descriptions.

Added field to specify feedback options when sending files to the server.

Configurator 5.2.0.0 (02.12.2018)

Removed test run the application with administrator rights.

Removed the edit acad.exe.config and revit.exe.config when connecting ModPlus for AutoCAD and Revit.

Auto Updates Module 3.0.5.0 (02.12.2018)

Removal of no longer used libraries ControlzEx.dll and MahApps.Metro.dll.

AutoCAD: Dwg base 1.1.4.0 (02.12.2018)

ModPlusStyle styling.

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

The restriction on the version of the stored blocks, and drawings changed from 2010 to 2013.

Fixed bug when convert the length and height of the product stored in the xml file using the function "Specifications".

AutoCAD: Notes 2.2.6.0 (30.11.2018)

Added checking the current running commands in AutoCAD before inserting a new multiline text or adding notes to an existing multiline text.

Working libraries for AutoCAD 2.4.2.0 (29.11.2018)

Added method to test the availability of the AutoCAD editor for later use in functions with non-modal Windows.

AutoCAD: Smart 1.3.5.0 (28.11.2018)

Fixed bug in setting the current annotative scale for the created entity when disabled property "Set the scale from style".

Added handling properties "Layer" in "Create analog" command (configurable in the Editor styles in the settings tab).

AutoCAD: Smart 1.3.3.0 (27.11.2018)

Section: fixed offset of text when scaling Section by the standard command "Scale".

Section: Added the possibility of mutual offset of the text (can be enabled in settings window).

Section: Added a new property "Sheet number position".

AutoCAD: Smart 1.3.0.0 (27.11.2018) Read more

Completely rewritten the function for later more quickly and efficiently adding intelligent primitives.

Added helper team "to Create analog".

Added a new intelligent entity "Section".

AutoCAD: Templates. Stage P 1.2.3.0 (25.11.2018)

ModPlusStyle styling.

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Added update view name when re-open function after rename a view in the project manager.

Fixed error when deleting a table if open only one drafting view.

AutoCAD: Tables 1.4.7.0 (21.11.2018)

Fixed a fatal error when selecting the binding in AutoCAD 2013-2015.

Fixed a bug with setting the height of rows and the height of text when scale is not 1:1.

AutoCAD: Normative base 1.1.3.0 (21.11.2018)

ModPlusStyle styling.

AutoCAD: Calculator 1.3.5.0 (19.11.2018)

ModPlusStyle style.

Removed window transparency.

AutoCAD: Title blocks 1.5.0.0 (18.11.2018)

ModPlusStyle styling.

AutoCAD: Smart 1.2.0.0 (11.11.2018)

Added a new object - Ground line.

Fixed some bugs.

AutoCAD: Sum of lengths 1.2.0.0 (09.11.2018)

ModPlusStyle styling.

AutoCAD: Smart 1.1.9.0 (07.11.2018)

ModPlusStyle styling.

AutoCAD: Products to table 1.2.2.0 (07.11.2018)

ModPlusStyle styling.

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

ModPlusStyle styling.

AutoCAD: Dim break 1.2.0.0 (03.11.2018)

Service update.

AutoCAD: Select similar 1.3.0.0 (03.11.2018)

ModPlusStyle styling.

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Configurator 5.1.7.0 (03.11.2018)

Changes in the design of the element "GroupBox" (in whole plugin).

Revit: Dimensions by line 1.7.0.0 (30.10.2018)

ModPlusStyle styling.

AutoCAD: Tables 1.4.5.0 (30.10.2018)

ModPlusStyle styling.

Revit: Import from Excel 1.3.1.0 (29.10.2018)

Fixed an error when searching for a suitable type of the TextNote.

Auto Updates Module 3.0.4.0 (29.10.2018)

In the application for the removal of debris (mpCleaner) added remove no longer used helper libraries.

Configurator 5.1.6.0 (29.10.2018)

Fixed a small error in the design of certain elements of Windows.

Added new themes: Black Blue, Black Green, Cornflower Blue, Gray AutoCAD Inverse, Powder Amaranth, White DeepOrange, White Lime.

Removed the use of some support libraries.

Improved change history.

Revit: Walls reinforcement 1.1.12.0 (25.11.2018)

ModPlusStyle styling.

Changes to the window layout.

Sorting has been added for some table columns.

Background wall reinforcement is removed only when creating the same new reinforcement (vertical, horizontal, U-shaped, stirrups).

Improved search for walls involved in the intersection, but not selected by the user.

Added the ability to not create background vertical or horizontal reinforcement.

Fixed the creation of reinforcement in intersections whose reinforcement is disabled in the group reinforcement settings.

Improved horizontal reinforcement trimming algorithm.

Removed the ability to make the window translucent.

Fixed bug when selecting U-shaped rods horizontally.

Fixed the creation of U-shaped rods in the ends of walls with a gap in height.

Revit: Import from Excel 1.3.0.0 (24.10.2018)

Improved merged cell handling.

AutoCAD: Copy with numbering 2.3.2.0 (21.10.2018)

ModPlusStyle styling.

Revit: Import from Excel 1.2.0.0 (21.10.2018)

Functions rebuilt to work with the format of Open Office Xml (xlsx).

Removed the settings window. Settings moved to main function window.

Added error handling when converting/building an excel sheet without interrupting the process of the function.

Small bugs fixed.

ModPlusStyle styling.

Revit: Dim offset 1.2.5.0 (21.10.2018)

Removed auto offset before first power up.

ModPlusStyle styling.

Configurator 5.1.3.0 (21.10.2018)

Fixed a critical error occurring during the upgrade without the subsequent launch of the Configurator.

Configurator 5.1.2.0 (21.10.2018)

Added several new themes.

The list of themes is ordered from light to dark.

Some bugs fixed.

AutoCAD: Aligning Dimensions 1.2.0.0 (19.10.2018)

ModPlusStyle styling.

Changing the location of function files.

Fixed the problem of dynamic preview when the function is working.

Parallel dimensions processing added to the option "Align dimension lines".

Replacing basic function icons with adding icons for a dark AutoCAD ribbon theme.

AutoCAD: Notes 2.2.4.0 (19.10.2018)

ModPlusStyle styling.

Changing the location of function files.

Revit: 3D section box 1.2.0.0 (19.10.2018)

ModPlusStyle styling.

Renga: Filter 1.0.2.0 (19.10.2018)

ModPlusStyle styling.

Working libraries for Renga 1.0.2.0 (19.10.2018)

Added support for new ModPlusStyle design library.

Working libraries for AutoCAD 2.3.0.0 (19.10.2018)

Added support for new ModPlusStyle design library.

Added check of adaptation menu with standard download in case of absence (internet connection is required).

Configurator 5.1.0.0 (19.10.2018)

Added new design library ModPlusStyle.

Fixed installation of all functions for Revit.

The "Settings" tab is divided into two tabs - "Settings" and "Registration".

Added timeout when working with FTP to prevent the Configurator from hanging in case there is no access to FTP.

Revit: Walls reinforcement 1.0.2.0 (01.10.2018)

Added two wall selection filters (one for choice) - "Crossed by a cut plane" and "Belonging to the current level".

Configurator 5.0.7.0 (29.09.2018)

Added support for Renga MEP.

Improved error collection when loading functions.

Added error handling when linking to Google.

Auto Updates Module 3.0.3.0 (29.09.2018)

Added support for Renga MEP.

Configurator 5.0.4.0 (27.09.2018)

Added a collection of errors when loading functions and then displaying them in a text document.

Revit: Dimensions by line 1.6.10.0 (24.09.2018)

Bug fixes.

Revit: Walls reinforcement 1.0.1.0 (22.09.2018)

Fixed a bug of reinforcement of walls connected with arc walls.

Configurator 5.0.3.0 (22.09.2018)

Fixed error checking the full versions of the function for AutoCAD when using a subscription.

Checking write access in the location directory of the plug-in with the prohibition of launching the application.

Auto Updates Module 3.0.2.0 (22.09.2018)

Checking write access in the location directory of the plug-in with the prohibition of launching the application.

AutoCAD: Block replace 1.2.2.0 (14.09.2018)

Service update.

Revit: Sheet copy 1.7.1.0 (12.09.2018)

Some bugs fixed.

AutoCAD: Text by center 1.2.0.0 (05.09.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Configurator 5.0.1.0 (04.09.2018)

The blurring of the function icons in the function list and in the adaptation menu has been removed.

AutoCAD: Fast text copy 1.2.0.0 (04.09.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Revit: Dimensions by line 1.6.9.0 (04.09.2018)

Fixed a bug "curve length is too small for Revit's tolerance", which occurs when working with elements of certain categories.

AutoCAD: Multi copy 1.2.0.0 (02.09.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

AutoCAD: Copy with numbering 2.3.1.0 (02.09.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Auto Updates Module 3.0.1.0 (02.09.2018)

Minor fixes in the mechanism for updating functions, taking into account the transfer to a new directory of functions for AutoCAD.

AutoCAD: Totals 2.1.4.0 (02.09.2018)

Fixed bug when installing the function for AutoCAD version 2013.

Renga: Filter 1.0.1.0 (02.09.2018)

Added function work on levels.

Working libraries for Renga 1.0.1.0 (02.09.2018)

Changes to the mechanism for loading functions.

Configurator 5.0.0.0 (01.09.2018)

Added support for Renga products.

Added the ability to disable all features for the specified product.

Fixed some minor bugs.

Auto Updates Module 3.0.0.0 (01.09.2018)

Added support for Renga products.

AutoCAD: Tables 1.4.3.0 (30.08.2018)

Corrected column heading in the table according to form 1 GOST 21.508-93.

Fixed bug when inserting the table in form 13 GOST 21.1101-2013.

AutoCAD: Smart 1.1.7.0 (27.08.2018)

Fixed a fatal error when building a Ribbon in AutoCAD 2013, 2014.

Working libraries for AutoCAD 2.3.2.0 (25.08.2018)

Fixed a fatal error when building a Ribbon in AutoCAD 2013, 2014.

Revit: Dimensions by line 1.6.8.0 (19.08.2018)

Added work with Parts.

Added work with linked Revit projects (only on the view plan).

Auto Updates Module 2.1.4.0 (15.08.2018)

Changes have been made to the search algorithm for the location directory of Revit's addin files.

Some bugs fixed.

Configurator 4.3.3.0 (15.08.2018)

Changes have been made to the search algorithm for the location directory of Revit's addin files.

Fixed bug with saving the adaptation menu when changing the size of the icons.

Some bugs fixed.

AutoCAD: Multi scale 1.1.1.0 (12.08.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Revit: Sheet copy 1.7.0.0 (07.08.2018)

Improved quick search by sheet list.

Fixed error copying values of only non-empty sheet parameters.

Added the ability to create copies of schedules instead of re-inserting them.

Changes have been made to the location of the settings in the function window.

AutoCAD: Normative base 1.1.1.0 (28.07.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

AutoCAD: Product insert 2.3.1.0 (28.07.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

AutoCAD: Draworder by layer 1.1.1.0 (28.07.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

AutoCAD: Auto layers 1.4.1.0 (27.07.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

AutoCAD: Specifications 1.6.4.0 (27.07.2018)

Fixed steel record when filling out the specification in the AutoCAD table.

AutoCAD: Title blocks 1.4.1.0 (21.07.2018)

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

Revit: Sheet copy 1.3.0.0 (11.07.2018)

Added the ability to copy the values of duplicated sheet parameters.

AutoCAD: Meshes 1.2.0.0 (09.07.2018)

Replacement of GOST 23279-85 at GOST 23279-2012.

Added saving of the entered values.

Replacement of main function icons adding icons for dark themes the AutoCAD ribbon.

AutoCAD: Smart 1.1.6.0 (05.07.2018)

Fixed a problem that caused a fatal AutoCAD error when working with some dynamic blocks.

Configurator 4.3.1.0 (01.07.2018)

Fixed some bugs when loading functions.

AutoCAD: Totals 2.1.3.0 (28.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

Fixed error of minimizing the function window when starting it from the floating menu.

Revit: Import from Excel 1.0.1.0 (20.06.2018)

Fixed the cause of fatal completion of the work of Revit in case of error reading excel file.

AutoCAD: Polylines 1.2.1.0 (18.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Reinforcement 1.1.1.0 (16.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Standards 2.2.6.0 (16.06.2018)

Fixed bug of saving sets of layers.

Revit: External dimensions on plan 1.1.1.0 (16.06.2018)

Changes are made in view of transfer of a folder of storage of the user settings.

Revit: Dimensions by line 1.5.7.0 (16.06.2018)

Changes are made in view of transfer of a folder of storage of the user settings.

Checking the name of the configuration when it was created.

AutoCAD: Smart 1.1.5.0 (16.06.2018)

Fixed a bug duplicate tabs on the Ribbon.

Changes are made in view of transfer of a folder of storage of the user settings.

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Specifications 1.6.3.0 (16.06.2018)

Changes are made in view of transfer of a folder of storage of the user settings.

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Notes 2.2.3.0 (16.06.2018)

Changes are made in view of transfer of a folder of storage of the user settings.

AutoCAD: Standards 2.2.5.0 (16.06.2018)

Fixed bug with adding multileader styles without arrows.

Changes are made in view of transfer of a folder of storage of the user settings.

Working libraries for AutoCAD 2.3.1.0 (16.06.2018)

Fixed a bug duplicate tabs on the Ribbon.

Configurator 4.3.0.0 (16.06.2018)

Fixed bug with saving Functions settings.

The transfer of the UserData folder storing the Function settings to the current program user settings storage directory (C:/Users/{user name}/AppData/Roaming/ModPlus/UserData).

Auto Updates Module 2.1.3.0 (16.06.2018)

Fixed bug with saving Functions settings.

The transfer of the UserData folder storing the Function settings to the current program user settings storage directory (C:/Users/{user name}/AppData/Roaming/ModPlus/UserData).

AutoCAD: Notes 2.2.2.0 (14.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Block replace 1.2.1.0 (14.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Dim break 1.1.1.0 (13.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Rotation angle of attributes 1.1.1.0 (12.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Tables 1.4.1.0 (12.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

AutoCAD: Calculator 1.3.2.0 (11.06.2018)

Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme.

Replace some icons in the function window.

Working libraries for AutoCAD 2.3.0.0 (09.06.2018)

Added the ability to change the icons of functions in the ribbon when switching the color theme in AutoCAD. Only if there are icons in the function itself.

Replaced icons, included in the working libraries, on the icon in the style of flat design.

AutoCAD: Standards 2.2.3.0 (08.06.2018)

Fixed bug when adding dimension style.

Replaced icon.

Configurator 4.2.5.0 (08.06.2018)

Added an additional method for finding the plugin registration folder for Revit.

Configurator 4.2.4.0 (08.06.2018)

Fixed some bugs when running the auxiliary library with the configuration file.

Configurator 4.2.3.0 (05.06.2018)

Added a new theme - AlabasterLight. Added new accent colors - Azure, SlateGray.

Revit: Dim offset 1.2.3.0 (03.06.2018)

Some bugs fixed.

Revit: Dimensions by line 1.5.5.0 (02.06.2018)

In the configuration settings window added the ability to check/uncheck the entire column.

Added work with categories: Air terminals, Windows, Doors.

New algorithms have been added, allowing for some categories (columns, air terminals, windows, doors) to put the size on the auxiliary working plane.

For the category "Equipment (Mechanisms)" added processing of extreme edges.

Fixed a bug that caused skipping of some faces of elements.

AutoCAD: Notes 2.2.1.0 (27.05.2018)

Minor corrections in design.

AutoCAD: Standards 2.2.1.0 (26.05.2018)

Fixed error loading the list of standards in the "Settings" tab.

AutoCAD: Product insert 2.3.0.0 (23.05.2018)

For linear products (which require specification of length), insertion options "By two point" (side view and top view) and "In form of polyline" (cross-section) are added.

Auto Updates Module 2.1.2.0 (10.05.2018)

Added immediate start of the second check of updates in case of reboot of the module after the update.

Added unblocking from plug-in files (they can be marked as blocked when downloading from the internet).

Working libraries for AutoCAD 2.2.0.0 (09.05.2018)

Changes are made taking into account the storage of settings in the registry.

Configurator 4.2.0.0 (09.05.2018) Read more

The storage of the main plugin settings, information about the installed functions and menu settings has been transferred from the configuration file to the registry.

Auto Updates Module 2.1.0.0 (09.05.2018) Read more

The storage of the main plugin settings, information about the installed functions and menu settings has been transferred from the configuration file to the registry.

Configurator 4.1.8.4 (05.05.2018)

Modified the methods of searching for Autodesk products on the user's computer, which will allow to connect the ModPlus plug-in to Advanced Steel.

Auto Updates Module 2.0.1.7 (05.05.2018)

Modified the methods of searching for Autodesk products on the user's computer, which will allow to connect the ModPlus plug-in to Advanced Steel.

Revit: Dimensions on plan 1.0.1.0 (03.05.2018)

Fixed a bug leading to a broken Function on some plans.

Configurator 4.1.8.2 (29.04.2018)

Fixed bug when reading the history of changes from the site with English enabled.

AutoCAD: Specifications 1.6.1.2 (25.04.2018)

Added saving of the entered steel values.

The problem of updating and downloading the 2013 version has been fixed.

Configurator 4.1.8.0 (25.04.2018)

Added the ability to manually configure the proxy.

Fixed bugs when updating plug-in components.

Fixed minor bugs.

Auto Updates Module 2.0.1.6 (25.04.2018)

Added the ability to manually configure the proxy.

Fixed bugs when updating plug-in components.

Fixed minor bugs.

Revit: Dimensions by line 1.1.1.0 (24.04.2018)

Added processing of equipment (mechanics) by the extreme edges.

AutoCAD: Smart 1.1.2.1 (23.04.2018)

The problem of displaying icons in the 2013 version has been fixed.

AutoCAD: Smart 1.1.2.0 (22.04.2018)

The error of incorrect setting of the first value of the axis at different angles was fixed.

The window for editing axis values has been added to change the position of the markers.

AutoCAD: Specifications 1.6.1.0 (20.04.2018)

Fixed bug when rounding the mass in the function window and filling in the tables.

Auto Updates Module 2.0.1.5 (20.04.2018)

Fixed bug when trying to update the configuration file during the installation of new functions.

Configurator 4.1.7.0 (16.04.2018)

Added work with three types of subscription: for all functions, for functions under AutoCAD, for functions under Revit.

Removed support for AutoCAD 2010-2012.

Terminated use of the third-party library Ionic.zip.dll.

Improved stability when initializing localization languages.

Auto Updates Module 2.0.1.2 (07.04.2018)

Removed support for AutoCAD 2010-2012.

Terminated use of the third-party library Ionic.zip.dll.

Improved stability when initializing localization languages.

Dwg base 1.1.1.0 (07.04.2018)

Terminated use of the third-party library Ionic.zip.dll.

Configurator 4.0.2.3 (03.04.2018)

Fixed the problem of encoding some characters when filling out the registration key on the function page by clicking the "buy" button in the list of functions.

Revit: Dim offset 1.2.1.0 (29.03.2018)

Improved algorithms for determining the new position for offset dimension values.

Revit: CAD manager 1.2.0.1 (28.03.2018)

Added import processing for CADLinkType type.

Working libraries for AutoCAD 2.0.0.4 (28.03.2018)

Fixed bug when loading palette.

Configurator 4.0.2.2 (28.03.2018)

Added support for AutoCAD 2019.

Working libraries for AutoCAD 2.0.0.2 (28.03.2018)

Added support for AutoCAD 2019.

Auto Updates Module 2.0.1.1 (28.03.2018)

Added support for AutoCAD 2019.

Configurator 4.0.2.1 (26.03.2018)

Auto-update module added downloading files with the system proxy server if available.

Auto Updates Module 2.0.1.0 (26.03.2018)

Auto-update module added downloading files with the system proxy server if available.

AutoCAD: Totals 2.1.0.0 (24.03.2018)

Fixed the problem of getting data from tables in the case when the user coordinate system is installed in the drawing.

Configurator 4.0.1.1 (22.03.2018)

Fixed the problem of the fatal error of the Configurator in the event that it was not possible to get a list of hard disks.

Small changes in design.

AutoCAD: Layout manager 1.9.1.0 (19.03.2018)

Fixed the problem of displaying items in the context menu.

Revit: Dim offset 1.2.0.0 (18.03.2018)

Fixed error when trying to move a dimension value for a dimension whose value offset is not possible.

Revit: Dimensions by line 1.1.0.0 (18.03.2018)

Completely rewritten function code. Now the function works not only on plans, but also on sections and facades.

Revit: Sheet copy 1.2.0.0 (18.03.2018)

Added the ability to duplicate legends and schedules without copying views.

Added alignment of the title block if it was inserted in the source sheet not at the origin.

Fixed some bugs when copying viewports.

AutoCAD: Smart 1.1.0.0 (18.03.2018)

Added a new intelligent primitive - a straight axis.

The style editor is also added and the settings of the plugin.

Many minor bug fixes.

Dwg base 1.1.0.0 (18.03.2018)

Tools for working with the user database added the ability to rename the source file.

AutoCAD: Specifications 1.6.0.0 (18.03.2018)

Fixed a bug with filling in the tables if there are subsections in the specification.

Fixed the problem of enabling / disabling context menus - now you do not need to restart AutoCAD.

AutoCAD: Draworder by layer 1.1.0.0 (18.03.2018)

Removed buttons "up" and "down", which are unnecessary due to the use of Drag-and-drop.

Fixed the problem of displaying layers that have a lower underscore in the name.

AutoCAD: Calculator 1.3.0.0 (18.03.2018)

Added journal of operations.

AutoCAD: Auto layers 1.4.0.0 (18.03.2018)

Added EATTEDIT and BEDIT commands to the exclusion list.

Configurator 4.0.0.0 (18.03.2018)

Configurator completely rewritten. Some bugs fixed.

Simplified display of the history of changes.

Completely changed the work with the adaptation menu. Added the ability to work with Drag-and-drop.

Added the ability to add small buttons to the menu for Revit (groups of 2 or 3 functions).

When you click the "Buy" button in the list of functions, the page of this function opens on the site with the completed versions of the product and registration key.

2017 Year

Auto Updates Module 1.9.4.0 (09.12.2017)

Checking the availability of new versions for functions is now performed only for those products to which the Mod Plus Plus plug-in is connected.

Added automatic registration feature for Revit "Application" type.

Revit: Dim offset 1.1.4.0 (07.12.2017)

Some bugs fixed.

Removed additional verification of text position added in version 1.1.3.0, because the solution was wrong.

AutoCAD: Calculator 1.2.5.0 (02.12.2017)

Side menu for selecting the operating mode is removed under the button (drop-down).

Added option "Insert result into existing single-line text with replacement".

Added window transparency (included in the side menu) when the window loses focus.

Added ability to round values from drawing.

Changes in window design.

Revit: 3D section box 1.0.1.0 (02.12.2017)

When processing selected or selected items, the processing of 3D view borders is excluded.

Revit: Dim offset 1.1.3.0 (02.12.2017)

Added additional verification of the position of the text, allowing more flexibility to work with the existing size with the enabled tracking mode for existing sizes.

Revit: Dim offset 1.1.2.0 (02.12.2017)

Some bugs fixed.

Revit: Dim offset 1.1.1.0 (29.11.2017)

Fixed bug when creating dimensions like "Diameter" and "Radius".

Added an offset of the dimensional value to the side, not down, if there is enough space on the adjacent size in the chain.

Added the ability (enabled/disabled in the settings window) to shift the dimensional value when editing an existing size.

AutoCAD: Templates. Stage P 1.1.6.5 (27.11.2017)

Amendments were made according to the Resolution of the Government of the Russian Federation of September 8, 2017 N 1081.

AutoCAD: Draworder by layer 1.0.1.1 (21.11.2017)

Fixed a bug that caused a fatal shutdown when applying changes to the drawing order.

AutoCAD: Draworder by layer 1.0.1.0 (20.11.2017)

Added closed windows Options by pressing Esc.

The Functions window is made non-modal (does not block Auto CAD).

Added the ability to stretch the window.

Added ability to change the order of layers in the list by dragging with the left mouse button.

Working libraries (20.11.2017)

Added new helper library.

Changed the principle of loading auxiliary libraries.

Auto Updates Module 1.9.2.0 (20.11.2017)

Changed the work of the auxiliary program "ModPlus Cleaner".

Configurator 3.1.5.2 (20.11.2017)

Removed "Enable All" button with replacing "Install All" button with "Install and Enable All".

The work of the button “Install and enable all” is changed - no indication of the product version is required (it can be installed for all versions of the product at once).

Configurator 3.1.5.1 (20.11.2017)

Fixed the problem of enabling the "Dim offset" function for some users.

Configurator 3.1.5.0 (13.11.2017)

Added methods required for registering certain Functions for Revit.

Configurator 3.1.4.1 (31.10.2017)

Added a ban on navigation in the change history.

Configurator 3.1.4.0 (30.10.2017)

Fixed video display issue on some computers.

Changed the source of the change history to the change history from the site.

AutoCAD: Tables 1.3.5.3 (30.10.2017)

A typo in the table according to form 3 of GOST 21.508-93 has been fixed.

AutoCAD: Formats 2.2.7.4 (30.10.2017)

Amendments have been made in connection with the updating of side markings in accordance with GOST 21.1101-2013 Appendix Zh.

AutoCAD: Title blocks 1.3.1.5 (30.10.2017)

Corrected lateral inscriptions according to GOST 21.1101-2013 Appendix F (in relation to GOST 21.1101-2009).

Fixed small errors in the design of the window.

AutoCAD: Layout manager 1.8.0.4 (26.10.2017)

Added the ability to specify the number of copies when copying sheet(s).

AutoCAD: Text by center 1.0.4.0 (17.10.2017)

Added memorization function of the last mode of operation - the creation of new text or move an existing.

In the mode of moving existing text, the function is obscured until the user cancels it.

In the mode of moving existing text, pre-selection processing is added - first select single-line text, then start the function.

AutoCAD: Templates. Stage P 1.1.6.4 (17.10.2017)

Fixed the contents of the KR template of documentation for capital construction objects.

AutoCAD: Smart 1.0.0.5 (15.10.2017)

Fixed an issue that caused Auto CAD to freeze when working with a drawing with external references inserted when object snapping is enabled.

AutoCAD: Specifications 1.5.0.5 (14.10.2017)

Fixed a fatal error when searching for products from a drawing.

Working libraries for AutoCAD 1.8.3.6 (12.10.2017)

Fixed a fatal error when trying to open an advertising window in paid features.

Revit: Sheet copy 1.1.0.1 (12.10.2017)

Added the ability to specify the number of copies for each sheet.

Added search and replace in sheet number.

Fixed some errors in viewport duplication.

AutoCAD: Smart 1.0.0.4 (12.10.2017)

Some bugs fixed.

AutoCAD: Sheet numbering 1.2.7.5 (10.10.2017)

Fixed a bug in the order of numbering from the specified cell down.

Auto Updates Module 1.9.1.0 (10.10.2017)

Added progress window, displayed only when installing updates.

Fixed error in building the adaptation menu when installing new functions when Auto CAD and Revit are available in the system.

Auto Updates Module 1.9.0.0 (10.10.2017)

Completely removed the window with the display of progress.

Removed the automatic minimization of the installation window.

Removed the "Missed events" menu item, as well as creating and processing the file of the missed events.

Added a notification window about the news on the site and in the community in the VK.

AutoCAD: Smart 1.0.0.3 (08.10.2017)

Fixed a bug that leads to the disconnection of standard handles on AutoCAD tables.

AutoCAD: Draworder by layer 1.0.0.4 (08.10.2017)

Fixed a bug that sometimes appears after creating a new layer when the "Auto" mode is on.

AutoCAD: Smart 1.0.0.2 (08.10.2017)

Added updated data in the properties palette when changing the current selection of primitives.

AutoCAD: Product insert 2.1.0.4 (07.10.2017)

Added ability to save entered dimension values.

Added rounding to integer numbers of measured sizes.

AutoCAD: Smart 1.0.0.1 (06.10.2017)

Fixed the "eNotApplicable" error when editing tables.

AutoCAD: Draworder by layer 1.0.0.3 (05.10.2017)

Исправлена фатальная ошибка при открытии окна Функции.

AutoCAD: Templates. Stage P 1.1.6.3 (05.10.2017)

Fixed a fatal error when opening the Function window.

AutoCAD: Sheet numbering 1.2.7.4 (05.10.2017)

Fixed a fatal error when opening the Function window.

AutoCAD: Formats 2.2.7.3 (05.10.2017)

Fixed a fatal error when opening the Function window.

Working libraries for AutoCAD 1.8.3.5 (04.10.2017)

Added methods required for new Functions.

Configurator 3.1.3.3 (26.09.2017)

Removed unused items on the Settings tab.

Added check of start with administrator rights and a button for restarting the Configurator with administrator rights..

Minor changes to tape construction methods..

Working libraries for AutoCAD 1.8.0.1 (06.06.2017)

Some bugs fixed, arising from the construction of the ribbon, palette and / or floating menu.

Auto Updates Module 1.7.5.0 (05.06.2017)

The item "Open Configurator" is added to the context menu of the module..

Added the ability to select the action by double-clicking on the tray icon in the settings: open the settings window or open the Configurator.

Configurator 3.0.5.0 (04.06.2017)

Added ability to install dwg base pointer file.

Added support for new interface for interacting with the ModPlus plugin..

Some minor changes have been made to the work of the "Adaptation" section in view of the new interaction interface..

Working libraries for Revit 1.2.0.0 (04.06.2017)

Added support for new interface functions interaction with the plugin Mod Plus. Now more complete hints with pictures are available in the ribbon (provided they are added to the function).

Added the ability to create functions that have subfunctions. Those. in one function there can be several commands.

Changed methods when building a tape.

Working libraries for AutoCAD 1.8.0.0 (04.06.2017)

Added support for new interface functions interaction with the plugin Mod Plus. Now in the ribbon and the menu are available more complete tips with pictures (provided they are added to the function).

Added the ability to create functions that have subfunctions. Those. in one function there can be several commands.

Changed methods when building a ribbon and menu.

Auto Updates Module 1.7.4.0 (04.06.2017)

Added support for checking and updating the dwg database.

Data bases 2.2.0.1 (29.05.2017)

Fixed error for square profile 100x100x3 according to GOST 30245-2003.

AutoCAD: Sheet numbering 1.2.7.2 (24.05.2017)

Changes made to prevent e On Locked Layer error when making changes to tables.

AutoCAD: Layout manager 1.8.0.2 (15.05.2017)

Fixed the error that occurred when invoking the context menu when the AutoCAD window was inactive.

AutoCAD: Formats 2.2.7.1 (24.04.2017)

Added processing of stamps for Ukraine (DSTU B A.2.4-4: 2009) and Belarus (STB 2255-2012).

Amendments to store base stamps in one file.

AutoCAD: Specifications 1.5.0.2 (24.04.2017)

Changes are made to keep the base tables in one file..

AutoCAD: Totals 2.0.3.2 (24.04.2017)

Changes are made to keep the base tables in one file..

AutoCAD: Title blocks 1.3.1.1 (24.04.2017)

Storage of base stamps transferred to one file..

Small changes in the design of the window function.

AutoCAD: Tables 1.3.5.1 (24.04.2017)

Storage of base tables moved to one file..

Added table according to GOST 21.111-84 Form 1 "Statement of the volume of construction and installation works".

Updated current versions of regulatory documents clarified..

Added "side stamps" in accordance with GOST 21.608-2014 Forms 4 and 5.

Small changes in the design of the window function.

Revit: Sheet copy 1.0.1.1 (24.04.2017)

Fixed error when copying sheets that do not have a title block..

Working libraries for Revit 1.1.1.2 (23.04.2017)

Added support for additional themes.

Working libraries for AutoCAD 1.7.7.2 (23.04.2017)

Added support for additional themes.

Configurator 3.0.3.2 (23.04.2017)

Added support for additional themes.

Added new design theme - DarkBlue.

All functions (22.04.2017)

Update due to the replacement of the third-party library responsible for window decoration.

Working libraries for Revit 1.1.1.1 (22.04.2017)

Update due to the replacement of the third-party library responsible for window decoration.

Working libraries for AutoCAD 1.7.7.1 (22.04.2017)

Update due to the replacement of the third-party library responsible for window decoration.

Configurator 3.0.3.1 (22.04.2017)

Added support for Revit 2018.

Replacing the third-party library responsible for window decoration.

Auto Updates Module 1.7.3.0 (22.04.2017)

Added support for Revit 2018.

Added sorting by database sections in the disable / enable documents window.

Added display of the status of the regulatory document.

To indicate the dimensions of the product (length, width, height, diameter) added the ability to measure the distance between two points in the drawing.

Added option "Replace block".

Added option "Add to entities", which allows to write data of a product/material to the extended data of any primitive.

In the context menu for primitives with extended data, the MR item has been added: Product data allowing viewing information of the selected product/material.

Added notes for additional product/material properties in some documents..

Some bugs fixed.

Data bases 2.2.0.0 (18.04.2017)

Updated steel grades for documents: GOST 27772-2015 (to replace GOST 27772-88), GOST 380-2005 (instead of GOST 380-94), GOST 1050-2013 (instead of GOST 1050-88), GOST 19281-2014 (instead of GOST 19281-89).

Added new normative documents: GOST 8736-2014, GOST 31938-2012, GOST 8267-93, GOST 5742, GOST 31360-2007, GOST 379-95, GOST 530-2012, GOST 28013-98.

In all documents of the database added the value "Status".

Added and changed some methods required for the section "Products".

AutoCAD: Select similar 1.0.3.2 (13.04.2017)

Added option for single line of text analogues on the length of the string.

Fixed bug removing the backlight when the cancellation of the team's work.

Added option (in settings) "to Add the samples in the resulting set (the choice on the model selected)".

Working libraries for Revit 1.1.1.0 (05.04.2017)

Added some helper methods that are required for functions to work.

Working libraries for Revit 1.1.0.0 (02.04.2017)

Removed floating menu.

Changed build method tab on the ribbon, given the Revit UI Api.

Configurator 3.0.3.0 (02.03.2017)

From a customization settings for Revit removed the options to enable/disable tape and floating menu. The default will always be under construction tab on the ribbon, and the floating menu excluded.

AutoCAD: Totals 2.0.3.0 (30.03.2017)

Added handling of stamps and tables of specifications for standards of Ukraine (DSTU B A. 2.4-4:2009) and Belarus (STB 2255-2012).

AutoCAD: Sheet numbering 1.2.7.0 (29.03.2017)

Added handling of the dies according to the standards of Ukraine (DSTU B A. 2.4-4:2009) and Belarus (STB 2255-2012).

Changes with changes of stamps in form F5, F9, Ф9а according to GOST R 21.1101-2013.

Fixed errors when processing some stamps.

AutoCAD: Title blocks 1.3.0.0 (28.03.2017)

Amended in accordance with GOST R 21.1101-2013 to replace GOST R 21.1101-2009 – changed the stamps on the form F5, F9, Ф9а.

Corrected the installation of a large font and no indentation in some stamps.

Added stamps on the documents: DSTU B A. 2.4-4:2009 for Ukraine and STB 2255-2012 for Belarus.

Multiple small changes in the design of the Windows functions.

Working libraries for AutoCAD 1.7.7.0 (25.03.2017)

Fixed some bugs in the library for AutoCAD 2018.

Auto Updates Module 1.7.2.0 (25.03.2017)

Added support for AutoCAD 2018.

Configurator 3.0.2.0 (25.03.2017)

Added support for AutoCAD 2018.

Configurator 3.0.1.0 (21.03.2017)

To developers: fixed error displaying functions developed for AutoCAD in the absence of Revit.

Working libraries for AutoCAD 1.7.6.0 (20.03.2017)

Fixed a bug causing the lack of a button to start function "Fields" in the ribbon.

Added a button to run the function Fields in the palette flyout menu (must be installed feature "Stamps").

Auto Updates Module 1.7.1.0 (19.03.2017)

Changes in the collection of statistics, taking into account changes of data acquisition on AutoDesk products.

Auto Updates Module 1.7.0.0 (18.03.2017)

Added support for Revit 2017.

Fixed bug with setting/removing the checkmark from the "Send statistics" and "Send errors".

Various small fixes and additions.

Configurator 3.0.0.0 (18.03.2017)

Added support for Revit 2017.

Changed the search engine AutoDesk products.

The splash screen is replaced by a dynamic display of the loading stages of Configurator.

Various small fixes and additions.

Working libraries for AutoCAD 1.7.5.0 (16.03.2017)

For developers: fixed a fatal error that occurs in the absence of a developed library icons.

Working libraries for AutoCAD 1.7.4.0 (10.02.2017)

Fixed error when creating a floating menu after upgrade to 1.7.3.0.

Working libraries for AutoCAD 1.7.3.0 (10.03.2017)

Some bugs fixed that could occur when building a menu of adaptation.

The changes required for future expansion of the functionality of the plugin.

AutoCAD: Notes 2.1.1.0 (04.03.2017)

On the settings tab added methods for working with server – upload and download user files of notes. Only available in the full version of the function.

Working libraries for AutoCAD 1.7.2.0 (04.03.2017)

In the settings window added the ability to specify the mail to the server.

Fixed the size of floating Windows when folding and unfolding.

Configurator 2.7.5.0 (04.03.2017)

Fixed links when you go to the website to buy functions.

Some bugs fixed.

Auto Updates Module 1.6.6.0 (04.03.2017)

Removed the focus on the information window of the module.

Added check for names of statistics files when sending to the server in case of coincidence of user logins.

AutoCAD: Formats 2.2.6.0 (02.03.2017)

Added a repetition of the angle of rotation model formats the replacement of mats.

AutoCAD: Standards 2.1.4.0 (02.03.2017)

Fixed eNullObjectId ("object Reference not set to an instance of an object"), appearing for some users when adding standards.

Auto Updates Module 1.6.4.0 (26.02.2017)

Fixed a bug resulting in sending the log file and statistics every time you check for updates (sending only happens once a day).

Auto Updates Module 1.6.3.0 (23.02.2017)

Added logging module and sending the log files to the server.

In the module settings dialog added option to enable/disable the sending of errors and statistics.

Small changes in the code.

Configurator 2.7.0.0 (20.02.2017)

Module auto-update added the ability to update the module without running Configurator.

Configurator 2.6.2.0 (20.02.2017)

In the module auto-update fixed bug where didn't display the message box.

Removed from the statistics IP information and left only the data about the location (country, city) defined by IP.

Configurator 2.6.1.0 (20.02.2017)

The module auto-update set to run as administrator.

Some bugs fixed.

Configurator 2.6.0.0 (19.02.2017)

In the collection of statistics added location detection by ip.

Changed graphic design the context menu of the module auto-update.

Fixed error when manually installing/updating via the auto-update module.

Various minor fixes.

Configurator 2.5.6.0 (19.02.2017)

Fixed bug in auto-update module that occur when sending errors in case the folder /ModPlus/Errors.

Fixed bug in Configurator, resulting in the removal of the login in "Login"field.

Fixed an error creating the entry in the registry, after deleting the settings.

Module auto-update added save errors to a file.

Configurator 2.5.3.0 (18.02.2017)

Fixed error when deleting all settings.

Added the option to remove the app (on the Settings tab).

Removed ability to switch to another settings file.

Added the ability to save (and download) the configuration file on the server modplus.org.

Added the ability to save (and download) the keys for paid functions on the server modplus.org.

Added ability to send error files to the server modplus.org (to be included in Configurator on the Settings tab).

Window display errors that occurred during the ModPlus plugin, removed the button "Save to file". Errors will always persist (folder /ModPlus/Errors).

Added the ability to collect and send usage statistics of the plugin (should be included in Configurator on the Settings tab).

Small cosmetic changes.

AutoCAD: Tables 1.3.0.0 (16.02.2017)

Added ability to select the source database tables depending on the country.

Added tables to documents: DSTU B A. 2.4-4:2009 for Ukraine and STB 2255-2012 for Belarus.

Reworked the internal working methods of the function with the database table.

Dwg files of the tables, divided according to countries.

Removed the button "minimize the window".

Fixed some bugs.

Configurator 2.0.1.0 (13.02.2017)

Fixed error occurring when you first start the Configurator.

AutoCAD: Standards 2.1.3.0 (13.02.2017)

Fixed bug fill the current styles when you go to the "Settings"tab.

Fixed installation methods current layers after adding them.

Added methods to add text styles, stored in dimension styles and multileaders styles, which eliminates error in the absence of the desired text style from the list.

Working libraries for AutoCAD 1.7.0.0 (05.02.2017)

Amended by adding binding to your Google account.

Configurator 2.0.0.0 (05.02.2017)

Added reference to a Google account.

AutoCAD: Sheet numbering 1.2.4.0 (01.02.2017)

Added the ability to specify the worksheets which you want to make changes.

Some bugs fixed.

Working libraries for AutoCAD 1.6.0.0 (18.01.2017)

Added a new mini-feature of the Border of the viewport in model space.

AutoCAD: Totals 2.0.1.0 (18.01.2017)

Fixed bug when working with AutoCAD version 2013.

AutoCAD: Totals 2.0.0.0 (18.01.2017)

Added receive data sheets, including the processing of viewpoints on these pages.

Upon receipt of the statement of added processing drawings stamps on forms 4, 5, 6, 9, 9a (GOST 21.1101-2013).

The window functions added to the status bar.

Some bugs fixed in the code.

AutoCAD: Sheet numbering 1.1.3.0 (18.01.2017)

Changes in the processing of data according to forms 4, 5 (GOST 21.1101-2013).

Added processing of forms 9, 9a (GOST 21.1101-2013).

Fixed bug when clicking "Apply" in the absence of data for the application.

AutoCAD: Formats 2.2.5.0 (18.01.2017)

Corrections according to the changes of the stamp on the form 5 (GOST 21.1101-2013).

Fixed the cell to insert the sheet name in stamp form 4 (GOST 21.1101-2013).

AutoCAD: Title blocks 1.2.6.0 (18.01.2017)

Edited stamps on forms 5, 9, 9a according to GOST 21.1101-2013.

AutoCAD: Sheet numbering 1.1.0.0 (14.01.2017)

Attribute, are added to the block mats of the specified text height 3.

Changed progress bar color to the color of the current theme.

Working libraries for AutoCAD 1.5.4.0 (06.01.2017)

Changed methods to insert text and callouts used function Calculator – added handling of custom coordinate systems.

2016 Year

Working libraries for AutoCAD 1.5.3.0 (21.11.2016)

Some bugs fixed.

AutoCAD: Layout manager 1.8.0.0 (20.11.2016)

Some bugs fixed when switching between sheets.

Added remembering of the position for the Windows.

Added automatic translation into the text field Windows New sheet name and Rename a sheet when opening.

For window Move/copy added the ability to resize the window.

Added handling of Enter and Esc buttons in all the Windows functions.

Configurator 1.8.0.0 (14.11.2016)

Fixed error when manually installing updates from the specified folders/files in the module auto-update.

AutoCAD: Layout manager 1.7.3.0 (09.11.2016)

Added connection Manager sheets to palette, ModPlus.

Configurator 1.7.5.0 (09.11.2016)

Added ability to set the palette on the tab "Adaptation".

Removed the test login when loading the key file.

Working libraries for AutoCAD 1.5.2.0 (07.11.2016)

Added palette ModPlus with the ability to activate the tabs Function, Drawings.

Some bugs fixed when working with the list of open drawings.

Some bugs fixed the ribbon.

Added check the running of auto-update module.

AutoCAD: Layout manager 1.7.2.0 (06.11.2016)

Fixed a bug with copy empty tiles with the "move/copy".

Fixed display sheets when closing all documents.

AutoCAD: Layout manager 1.7.0.0 (04.11.2016)

Multiple selection (hold down Ctrl key or Shift key).

Added ability to enable/disable the query name when you create the worksheet.

Added button to create new sheet template.

Added context menu: Move/copy, Select all sheets, settings Manager leaves, Print, Export sheet tab of the model.

Changed the main mechanisms of function.

Fixed problem with minimizing the window settings when you minimize the palette.

Various bug fixes.

AutoCAD: Copy with numbering 2.2.4.0 (03.11.2016)

Small changes in the code.

AutoCAD: Specifications 1.0.1.0 (01.11.2016)

Added the option of rounding the masses when you insert products into a table AutoCad.

AutoCAD: Copy with numbering 2.2.3.0 (31.10.2016)

Added the ability to suppress the tailing zeros.

Fixed price function.

AutoCAD: Polylines 1.1.2.0 (03.09.2016)

Changed the mechanism of the construction of the middle line.

Working libraries for AutoCAD 1.4.0.0 (28.08.2016)

Added a new mini-feature is frequently used blocks. To configure and enable to use the Settings window (mpSettings).

AutoCAD: Tables 1.2.4.0 (17.08.2016)

Fixed small error in the code.

Working libraries for AutoCAD 1.3.2.0 (10.07.2016)

Added a backup configuration file.

Configurator 1.7.3.0 (05.07.2016)

Added the installation of databases.

AutoCAD: Standards 2.1.0.0 (30.06.2016)

Improved blocks "shooter" for dimension styles and multileaders styles (only for new).

Added the ability to copy standards from the specified file (can be set automatic copying when you create a new file).

AutoCAD: Polylines 1.1.1.0 (22.06.2016)

Fixed problem entering the distance from the second to the third point in the function the Rectangle by three points.

AutoCAD: Products to table 1.0.2.0 (12.06.2016)

Changes in connection with the updating of databases.

Data bases 2.1.0.0 (12.06.2016)

Changes required for new features.

AutoCAD: Multi copy 1.0.5.0 (07.06.2016)

Fixed a memory leak issue, causing a fatal error when the function blocks.

AutoCAD: Copy with numbering 2.1.1.0 (04.06.2016)

Added possibility to add leading zeros (bringing the number to the category).

Set prefix, suffix and leading zeros are put into a separate settings window, which appears automatically.

AutoCAD: Formats 2.2.4.0 (14.05.2016)

Added landing mats on layer "0" when insert or replace.

Configurator 1.7.2.0 (01.05.2016)

Improved work with missing messages in the module auto-update.

AutoCAD: Tables 1.2.3.0 (28.04.2016)

Fixed a bug that caused cleaning the cell text Height and the Height of the lines in the program window the first time you use the function.

AutoCAD: Copy with numbering 2.0.0.0 (25.04.2016)

Added the ability to copy blocks with numbered attributes.

AutoCAD: Polylines 1.1.0.0 (19.04.2016)

Added new feature Build the middle line.

AutoCAD: Copy with numbering 1.0.3.0 (18.04.2016)

Fixed offset of text when copying.

AutoCAD: Clear scales 1.2.0.0 (10.04.2016)

Fixed bug when working with multileaders.

AutoCAD: Totals 1.0.1.0 (06.04.2016)

Small changes in the code.

AutoCAD: Title blocks 1.2.3.0 (06.04.2016)

Removed option "Dynamic rendering of a table when inserting".

Fixed problem with fatal error when inserting tables in some files (mostly AutoCad 2016).

AutoCAD: Tables 1.2.2.0 (05.04.2016)

Removed option "Dynamic rendering of a table when inserting".

Fixed the bug of no menu when there is a message for the user of missed events.

Removed the option to automatically install new features.

Added selection dialog for new features to install.

Some bugs fixed.

Working libraries for AutoCAD 1.3.1.0 (26.03.2016)

Returned to the old module registration.

Fixed a build error empty (no functions) in the floating menu and the ribbon.

AutoCAD: Text by center 1.0.2.0 (24.03.2016)

Small changes in the code.

Working libraries for AutoCAD 1.3.0.0 (24.03.2016)

Attached communication module plug-in with AutoCad 2017.

An updated version of the module design.

Configurator 1.7.0.0 (24.03.2016)

Added support for AutoCad 2017.

Configurator 1.6.1.5 (13.03.2016)

Changed the default storage folder for the configuration file in /ModPlus/UserData.

Added removing of spaces while maintaining activation keys in the configuration file.

Added update icon in the tray after restart, automatic update module.

AutoCAD: Product insert 2.0.3.0 (05.03.2016)

Removed the button "minimize the window".

Added remembering last feature of these data: the steel, the density, the additional properties item in the table.

AutoCAD: Formats 2.2.3.0 (26.02.2016)

Added the ability to set the scale Formats (user request).

AutoCAD: Title blocks 1.2.2.0 (25.02.2016)

Fixed bug with scaling of text scaling of the stamp (box scale is not 1:1).

AutoCAD: Title blocks 1.2.1.0 (22.02.2016)

Fixed binding of stamp to the insertion point in the "drawing cursor".

AutoCAD: Tables 1.2.1.0 (22.02.2016)

Fixed binding the table to the insertion point in the "drawing cursor".

AutoCAD: Product insert 2.0.1.0 (21.02.2016)

Added the ability to edit the list of documents used by the function.

AutoCAD: Standards 2.0.4.0 (19.02.2016)

Fixed the error "Refresh not allowed..." when you change layer properties in the layer editor.

Fixed saving and loading of line styles to layers.

Fixed save and fill the set values for list "make current" in the settings.

AutoCAD: Title blocks 1.2.0.0 (14.02.2016)

Added the ability to paste stamps without drawing the cursor in the process of specifying the insertion point.

AutoCAD: Tables 1.2.0.0 (14.02.2016)

Added the ability to insert tables without drawing the cursor in the process of specifying the insertion point.

AutoCAD: Auto layers 1.3.3.0 (09.02.2016)

Removed the message “no document”, added early to test.

Fixed error reading list of commands to exception.

AutoCAD: Auto layers 1.3.1.0 (06.02.2016)

Fixed some minor bugs.

AutoCAD: Multi copy 1.0.4.0 (30.01.2016)

If the number of copies exceeds 100 pieces, while specifying the second point of the dynamic objects are drawn off.

AutoCAD: Reinforcement 1.0.4.0 (30.01.2016)

Added remembering of the function selected values of the normative document, diameter and grade of rebar.

AutoCAD: Auto layers 1.3.0.0 (30.01.2016)

Changed the mechanism to function in the best stability (experimental).

Added the ability to set layers for the selected objects from the window function .

AutoCAD: Auto layers 1.2.2.0 (26.01.2016)

Added the ability to save/load settings layers.

Some minor changes in the code.

2015 Year

AutoCAD: Formats 2.2.2.0 (27.12.2015)

Added the same version 1.1.3.4 function Stamps.

AutoCAD: Title blocks 1.1.3.4 (27.12.2015)

Added the ability to get a value for a field from the object in the current drawing (text, multileader, table).

Added the ability to load the field values from the specified dwg file.

Improved display of tooltips for the fields in accordance with GOST R 21.1101-2013 (tooltip when you hover the cursor on the input field).

Added the ability to specify the height of text in cells of a stamp.

Added the ability to specify additional text height for some cells of a stamp ("document Symbol", "stage", etc.).

The function changes the spacing horizontally and vertically in the cells of a stamp after it is inserted into 0.5. For cells "number.Uch." and "n-dock" the horizontal spacing is changed to 0.0.

Added the ability to use the dwg file as a logo for the stamp.

Some minor changes in code and design.

AutoCAD: Auto layers 1.1.1.0 (22.12.2015)

Fixed some minor bugs.

AutoCAD: Formats 2.1.9.0 (22.12.2015)

Added the display window size of the selected format.

Added saving the selected orientation of the side multiplicity.

Working libraries for AutoCAD 1.2.1.0 (06.12.2015)

In the settings window added the section "Context menu".

Added a mini-feature "Set sub entities ByBlock".

Configurator 1.6.1.2 (03.12.2015)

Some bugs fixed in the update.

Configurator 1.6.1.0 (02.12.2015)

From the Configurator removed old versions check for updates.

Module auto-update added checking for latest updates 2 minutes after the start of the module.

Small changes in the code.

Working libraries for AutoCAD 1.2.0.0 (30.11.2015)

Of the modules of the plugin to work in AutoCad removed everything associated with checking for updates (methods, settings).

Configurator 1.6.0.0 (29.11.2015)

Added module of automatic update of plug-in components.

AutoCAD: Block replace 1.1.0.0 (19.11.2015)

Added the ability to repeat for the replacement of blocks on some properties of the model blocks (layer, scale, transformation).

Added settings window functions.

To request the removal of units from the database-added options (to ask, to automatically delete, not remove).

AutoCAD: Tables 1.1.0.0 (11.11.2015)

When inserting tables sometimes there is a fatal error in AutoCad. In this regard, the code for inserting tables in the drawing has been redone.

Added a new table (11 pieces) according to GOST 21.701-2013 "ASAP. Rules of execution of working documentation for roads".

Added the ability to zoom and pan the image preview of tables.

Replaced all image preview tables.

Added display of the document title in the window functions.

AutoCAD: Standards 2.0.3.3 (08.11.2015)

Sorting layers in the layer editor in ascending order (by name).

Added button to refresh the list of layers.

AutoCAD: Calculator 1.2.0.0 (07.11.2015)

Added the section "Interpolation".

Added the section "Degree bias".

Various small changes.

AutoCAD: Templates. Stage P 1.1.6.0 (07.11.2015)

Fixed error when building the AR template.

AutoCAD: Standards 2.0.2.3 (31.10.2015)

Of treatment while maintaining and creating the removed layers IsReconciled (agreed).

Configurator 1.5.5.0 (31.10.2015)

Changes in connection with the updating working files.

Working libraries for AutoCAD 1.1.8.1 (31.10.2015)

In the settings window added button "Check for updates".

Added floating window "Drawings". Included in the preferences window.

Added ability to minimize the floating Windows (can roll in the title or collapse icon).

Small changes in the file settings.

Data bases 2.0.0.2 (29.10.2015)

Attached document: TU 14-3R-56-2001 "welded steel Pipes with diameter of 1420, 1620, 1720, 2020 and 2220 mm General purpose".

AutoCAD: Standards 2.0.1.3 (26.10.2015)

Fixed minor bugs.

AutoCAD: Standards 2.0.1.0 (25.10.2015)

Fixed bug when you save sets of layers .

AutoCAD: Standards 2.0.0.0 (25.10.2015)

The ability to add and store their own standards.

Automatically adding these standards to create or open a drawing.

Configurator 1.5.4.0 (25.10.2015)

Fixed links when you click "go to store".

AutoCAD: Title blocks 1.0.7.0 (18.10.2015)

From the list of blocks for the logo removed anonymous blocks.

In the option "Fields" is added before viewing cells (GOST R 21.1101, Appendix W, form 3).

When you insert the stamp sometimes there is a fatal error in AutoCad. In this regard, the code for the insert stamp in the drawing has been redone.

Various small changes.

AutoCAD: Formats 2.1.7.0 (12.09.2015)

Added the ability to insert the sheet name and number in the stamp when creating a new sheet (if the stamp supports insertion).

Removed ability to resize the window.

Fixed error when reading the settings when you first start.

From the list of blocks for the logo removed anonymous blocks.

Various small changes.

AutoCAD: Templates. Stage P 1.1.5.0 (07.09.2015)

Fixed template creation for AutoCAD versions 2011-2016.

AutoCAD: Templates. Stage P 1.1.4.0 (05.09.2015)

Made various changes to the templates.

Added sequentially numbered pages.

Fixed bug when retrieving data from a field drawing.

AutoCAD: Clear scales 1.1.0.0 (05.09.2015)

Fixed a bug when installing the scale, not contained in the object.

AutoCAD: Formats 2.0.0.0 (03.09.2015)

Removed annotation list newly created blocks formats.

Added graphical representation of mats.

Added the ability to add side labels.

Added the ability to add stamp using fields (according to the principle of function Stamps).

Added the ability to specify the worksheet name when you create a new sheet with format key.

Removed automatic creation of text style MpTxtStyle.

Added ability to set text style (like the mats and stamps).

Various small changes.

AutoCAD: Products to table 1.0.1.0 (16.08.2015)

Some bugs fixed.

AutoCAD: Auto layers 1.1.0.0 (08.08.2015)

Added the ability to edit the list of commands to exclude from the processing function.

Configurator 1.5.2.0 (20.07.2015)

Some important breaking changes in the code.

From the sorting options removed "Connected" and "Not connected" (a Temporary solution to the development of more convenient options of sorting).

Configurator 1.5.1.3 (18.07.2015)

Button "Enable all" works now for all versions of AutoCAD.

Fixed some bugs.

AutoCAD: Notes 2.0.0.0 (14.07.2015)

Completely redesigned interface of the Windows functions.

Simultaneous work with custom annotations and standard annotations ModPlus.

Configure the action by double-clicking on the note.

The ability to edit a custom note.

Many small fixes and improvements.

Configurator 1.5.0.0 (12.07.2015)

More quick start Configurator.

Revised methods for the list building functions.

Added welcome window.

Added search function.

Various small changes.

Data bases 2.0.0.1 (08.07.2015)

Fixed parameter mass per meter for pipes according to GOST 8645-68. Attention! Pipes according to GOST 8645-68, inserted in the form of products ModPlus to the current updates will continue to be wrong a lot!.

AutoCAD: Product position 2.0.0.0 (03.07.2015)

Update to the new principle of storing data in the database.

Various bug fixes.

Data bases 2.0.0.0 (03.07.2015)

A full update of the principles of database.

Working libraries for AutoCAD 1.1.4.0 (01.07.2015)

Added new methods to the extended data (required for new features section of the Product).

Working libraries for AutoCAD 1.1.3.3 (26.06.2015)

Some bugs fixed.

AutoCAD: Templates. Stage P 1.0.1.0 (25.06.2015)

Ignoring the error if it cannot delete the temporary files.

AutoCAD: Reinforcement 1.0.2.0 (24.06.2015)

Faster export to calculate the length of anchoring in Word.

AutoCAD: Product insert 1.0.1.0 (23.06.2015)

For primitives in the generated set unit properties "Block" that will allow you to change the block color, style and weight of lines.

AutoCAD: Tables 1.0.4.0 (22.06.2015)

Added the ability to delete a file path to insert table from a file.

Fixed bug when insert some tables.

Various small changes.

Data bases 1.0.1.0 (21.06.2015)

Changes required for new features.

AutoCAD: Multi copy 1.0.3.1 (15.06.2015)

Fixed problem copying dynamic blocks.

Working libraries for AutoCAD 1.1.3.1 (13.06.2015)

A window with the message about new features replaced by the more informative.

Fixed small error in the code.

Configurator 1.4.9.4 (12.06.2015)

Added ability to work with activation keys (export, import, check all, delete).

Added social links (youtube, google ).

In the description of the functions added to video (as soon on the youtube channel).

Added the ability to create/delete the shortcut on the desktop.

Added the ability to collapse the left panel on the Configuration tab.

Minor fixes in the Updater.

Various small changes.

AutoCAD: Fast text copy 1.0.1.0 (31.05.2015)

Copying text regardless of the text-the source is in single line or multiline.

All functions with windows (30.05.2015)

Changes in connection with the updating library window decoration.

A slight change of style of Windows.

Working libraries for AutoCAD 1.1.2.0 (30.05.2015)

Changes in connection with the updating library window decoration.

A slight change of style of Windows.

Configurator 1.3.3.8 (30.05.2015)

Replaced library the window decoration.

Setting window border plugin.

A message to the user about the availability of new features.

The list building functions are only available for versions of AutoCad.

A slight change of style of Windows.

Remembering window position Configurator.

Changed the way of displaying the change history.

Added options for connection.

Added the ability to check the entered activation key.

Various small changes.

Minor fixes in the Updater functions.

AutoCAD: Tables 1.0.2.6 (26.05.2015)

Fixed problem rewriting the text style MpTxtStyle when you insert a table.

AutoCAD: Tables 1.0.2.5 (26.05.2015)

Removed regeneration after inserting the table.

Improved application properties to the inserted table.

Small changes in the design window.

AutoCAD: Meshes 1.0.1.0 (24.05.2015)

Fixed display Windows with a dark theme.

Configurator 1.3.0.0 (21.05.2015)

Added a new version of the bind program to a physical disk.

Improved test versions of plug-in components.

Various small changes.

Working libraries for AutoCAD 1.1.0.0 (21.05.2015)

Added a new version of the bind program to a physical disk.

Improved test versions of plug-in components.

Various small changes.

AutoCAD: Title blocks 1.0.4.2 (14.05.2015)

Added decals (2pcs) for GOST 2.104-2006.

Small changes in the code.

Working libraries for AutoCAD 1.0.9.0 (03.05.2015)

Added methods for working with databases.

Working libraries for AutoCAD 1.0.8.0 (28.04.2015)

Added new methods for future features.

Improved handling of update check in the settings window.

Verification of conformity of the AutoCad version of the plugin.

Configurator 1.2.0.0 (23.04.2015)

A separate theme for the plugin and Configurator.

The update features a separate module.

Various small changes.

AutoCAD: Auto layers 1.0.3.0 (21.04.2015)

Important critical fixes in the code.

Configurator 1.1.7.0 (20.04.2015)

Various changes required for new features.

Configurator 1.1.6.8 (20.04.2015)

Various minor changes.

Working libraries for AutoCAD 1.0.7.7 (19.04.2015)

Small changes in the code.

AutoCAD: Sum of lengths 1.0.3.1 (17.04.2015)

Fixed display of results when a dark design.

Added the option of rounding the result.

Added the ability to insert the result in the table cell.

Added the ability to insert the result in the form of a single line of text.

AutoCAD: Auto layers 1.0.2.0 (17.04.2015)

Important critical fixes in the code.

AutoCAD: Select similar 1.0.1.1 (17.04.2015)

Added option comparison a single-line text height.

Corrected the function icon in the ribbon, and the Configurator is displayed normally.

Working libraries for AutoCAD 1.0.6.5 (16.04.2015)

In the settings window added Adaptation.

Exclusion from the list (while checking for New availability of new functions) functions with the parameter do Not recall.

Added settings button in the ribbon.

Configurator 1.1.6.0 (16.04.2015)

Added new options to sort list of functions.

Added button to Set all.

Added button to Enable all.

Added SplashScreen.

Added option to remind for unspecified functions.

Various minor changes.

Configurator 1.1.0.3 (13.04.2015)

Tab Adaptation added a button to Clear the menu.

Fixed a bug with the build menu of adaptation at the touch of a button to Build a standard.

Fixed display of icons in menu adaptation.

Working libraries for AutoCAD 1.0.4.2 (11.04.2015)

Small changes in the code of the plugin ModPlus 2016.

Working libraries for AutoCAD 1.0.4.1 (11.04.2015)

Added ModPlus plugin to work in AutoCad 2016.

Configurator 1.1.0.0 (11.04.2015)

Added support for AutoCad 2016.

AutoCAD: Multi copy 1.0.1.1 (05.04.2015)

The function remembers the last entered distance value and the step.

AutoCAD: Notes 1.0.1.0 (05.04.2015)

Added the ability to enable the context menu to Add as a note for single-line and multiline text.

AutoCAD: Tables 1.0.2.2 (29.03.2015)

Modified GOST R 21.1101-2009, GOST R 21.1101-2013.

Added table according to GOST 21.602-2003 (Forms 1,2,3,4).

A variety of related fixes in the code.

Configurator 1.0.9.6 (28.03.2015)

Remembering by Configurator the size of the window when closing.

Tab on the Adaptation button is added to the standard Build - the build menu on the standard scheme.

Added options to show the active functions (Adaptation): all not used.

On the About tab-added history of changes.

Various fixes in the code.

Configurator 1.0.5.2 (24.03.2015)

Minor fixes in the code.

Working libraries for AutoCAD 1.0.3.1 (24.03.2015)

Added tune function ModPlus. The function is included in the plugin itself.

Tweaked to work with the ribbon and floating menu.

AutoCAD: Title blocks 1.0.3.1 (24.03.2015)

Modified GOST R 21.1101-2009, GOST R 21.1101-2013.

Positions in the stamp are saved in the configuration file.

Added the ability to create custom posts and use them as fields.

In the list of posts in the stamp are now being used for empty values, allowing you to add posts to the desired cell of a stamp.

Configurator 1.0.5.1 (07.03.2015)

Added check for running copies of an application.

Configurator set to run as administrator.

Automatic closing of the Configurator when you start AutoCad.

In the update function working libraries (mpUpdater.exe in the folder ModPlus) added ability to apply updates from the specified file.

Improved work with list of functions with the availability of multiple versions of AutoCAD.

Minor fixes in the code.

Company

Plugins

Legal information

ModPlus 2015-2026